SIEG tailstock for precision rotary table Ø 100 mm
€100.00*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
A tailstock is used to support longer workpieces. The centre point in the tailstock engages in the centring hole on the front of the workpiece.
Technical data
| Base dimensions [mm]: | 103 x 39 |
|---|---|
| Centre height [mm]: | 68 |
| Centre Ø [mm]: | 13 |
| Material lace: | C45E steel |
| Net weight [kg]: | 1,2 |
| Tip hardness [HRC]: | 40 - 45 |
| Total height [mm]: | 80 |
Suitable for SIEG precision dividing attachment
Ground on all sides
Hardened, adjustable centre point
Centre point can be fixed via clamping screw
Large, user-friendly adjustment wheels
Description of the
This tailstock, ground on all sides, is suitable for the SIEG precision dividing attachment Article No. 16050, i.e. the centre height of this tailstock corresponds to the height of the support up to the rotary axis of the rotary table (for horizontal use). Both the centre point guide and the centre point itself can be adjusted laterally using knurled adjustment wheels. The set position of the centre point guide can be fixed using a hexagon socket screw. The centre point is locked in place using a clamping screw on the side. The base has two slotted holes for fastening to the machine table. The centre point guide can be lubricated via an oiler.
Scope of delivery
- 1 x SIEG tailstock for dividing head
More about the brand and products from
This tailstock, ground on all sides, is suitable for the SIEG precision dividing attachment Article No. 16050, i.e. the centre height of this tailstock corresponds to the height of the support up to the rotary axis of the rotary table (for horizontal use). Both the centre point guide and the centre point itself can be adjusted laterally using knurled adjustment wheels. The set position of the centre point guide can be fixed using a hexagon socket screw. The centre point is locked in place using a clamping screw on the side. The base has two slotted holes for fastening to the machine table. The centre point guide can be lubricated via an oiler.
Thanks to its height-adjustable centre, this tailstock is suitable for dividing heads with a rotary table centre between 75 and 105 mm in the vertical position.
To achieve horizontal alignment of the workpiece, it is clamped between the dividing attachment and the tailstock. The tailstock centre is fixed at the set height by a clamping screw, and the horizontal position of the centre can also be secured by clamping.
Lateral adjustment of the centre point is made possible by a knurled rotary knob. The horizontal travel of the centre is 27.5 mm.
With its height-adjustable centre, this tailstock is suitable for dividing heads with a rotary table centre between 75 and 90 mm in the vertical position.
To achieve horizontal alignment of the workpiece, it is clamped between the dividing attachment and the tailstock. The tailstock centre is fixed at the set height by a clamping screw, and the horizontal position of the centre can also be secured by clamping.
Lateral adjustment of the centre point is made possible by a knurled rotary knob. The horizontal travel of the centre is 30 mm.
With its height-adjustable centre, this tailstock is suitable for dividing heads with a rotary table centre between 45 and 80 mm in the vertical position.
To achieve horizontal alignment of the workpiece, it is clamped between the dividing attachment and the tailstock. The tailstock centre is fixed at the set height by a clamping screw, and the horizontal position of the centre can also be secured by clamping.
Lateral adjustment of the centre point is made possible by a knurled rotary knob. The horizontal travel of the centre is 27 mm.
€100.00*
Content: 1 pcs
€105.00*
Content: 1 pcs
€49.50*
Content: 1 Piece
€57.00*
Content: 1 pcs
5 May 2021 00:00
Gut!
Sauber verarbeitet, voll verstellbar, außer in der Höhe. Was man wissen sollte ist, dass max. M8 Schrauben zur Klemmung mit Nutsteinen passen. Das wird in der Produktbeschreibung leider nicht erwähnt. Für größere Frästische braucht man also spezielle Nutsteine (großer Stein, kleines Gewinde), die man sich aus z.B. Rohlingen selbst herstellen kann.