paulimot Steel holder with prism suitable for "System Multifix", size E
€68.00*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
Less than 10 pieces available (online and in specialist shops)
Intended use
A quick-change steel holder set is a precise and efficient clamping system for lathes to enable the quick change of turning tools, boring bars or other tools. The steel holder with the clamped tool is correctly aligned to the centre of the machine spindle just once. This positioning is fixed using a lock nut and is therefore set to the correct height each time the steel holder is reinserted into the base body. The base body of the system is firmly mounted on the top slide of the lathe and forms the basis of the system. The steel holder is the interchangeable component in which the turning tools are clamped. The system's fine-toothed ratchet system enables repeatable alignment of the tool without the need for readjustment.
Technical data
| Hardness of steel holder [HRC]: | 40 |
|---|---|
| Length [mm]: | 100 |
| Suitable for dimension "s" [mm]: | 21 - 50 |
| Suitable for top slide width [mm]: | 95 - 110 |
| Surface: | ground |
| System size: | E |
| Tool material Steel holder: | C45E steel |
| Turning steel holder [mm]: | 16 - 30 |
Steel holder suitable for "System Multifix", size E
For clamping turning tools with a round shank
Suitable for turning steel heights from 16 to 30 mm
Description of the
This steel holder is suitable for the "System Multifix" size E. The milled prism in the contact surface for turning tools makes it suitable for clamping tools with a round shank. Tools with a shank diameter of up to 30 mm can be clamped.
Scope of delivery
- 1 x steel holder EH 30100
More about the brand and products from
This steel holder is suitable for the "System Multifix" size E. The milled prism in the contact surface for turning tools makes it suitable for clamping tools with a round shank. Tools with a shank diameter of up to 30 mm can be clamped.
This steel holder is suitable for the "System Multifix" size Aa. The milled prism in the support surface for turning tools makes it suitable for clamping tools with a round shank. Tools with a shank diameter of up to 12 mm can be clamped.
This steel holder is suitable for the "System Multifix" size Ab. The milled prism in the support surface for turning tools makes it suitable for clamping tools with a round shank. Tools with a shank diameter of up to 16 mm can be clamped.
This steel holder is suitable for the "System Multifix" size A. The milled prism in the support surface for turning tools makes it suitable for clamping tools with a round shank. Tools with a shank diameter of up to 20 mm can be clamped.
This steel holder is suitable for the "System Multifix" size B. The milled prism in the support surface for turning tools makes it suitable for clamping tools with a round shank. Tools with a shank diameter of up to 32 mm can be clamped.
Tip:
Are you unsure which quick-change steel holder size is right for you?
Then our guide is just right for you! In it, we show you how you can easily determine the right size.
Our guide to quick-change steel holder sizes: Determining the right quick-change steel holder size - our tips.
Alternatively, you can also use our quick-change steel holder advisor: Quick-release steel holder advisor
This steel holder is suitable for the "System Multifix" size C. The milled prism in the support surface for turning tools makes it suitable for clamping tools with a round shank. Tools with a shank diameter of up to 40 mm can be clamped.
€68.00*
Content: 1 Piece
€25.00*
Content: 1 pcs
€44.00*
Content: 1 Piece
€46.00*
Content: 1 pcs
€78.00*
Content: 1 pcs
€105.00*
Content: 1 Piece
11 December 2022 10:21
Alles prima !
Alles prima !
19 October 2022 13:54
Qualität sehr gut, Lieferzeit sehr gut und
Qualität sehr gut, Lieferzeit sehr gut und Preis / Leistung einwandfrei
14 September 2022 08:33
Produit de bonne qualité reçu rapidement !
Produit de bonne qualité qui complète ma série de porte-outils. Ma commande a été traité rapidement et je l'ai reçu sous une semaine. Très content de la qualité du service Paulimot.
6 March 2021 00:00
multifix E
super produit a prix raisonnable
26 January 2021 00:00
Super Addresse
Top!!!
21 December 2020 00:00
Preisgünstig aber ohne wichtiges Zubehör
Der Stahlhalter Grösse E ist Preisgünstig, jedoch fehlt das Einlegeprisma für die kleineren rundquerschnittigen Drehstähle. Die müssen andernorts gekauft werden.
12 January 2020 00:00
Alles bestens.
Alles bestens.
14 December 2018 00:00
Bin sehr zufrieden!
Bin sehr zufrieden !
3 April 2018 00:00
sehr gut
30 December 2017 00:00
guters Preis-/Leistungsverhältnis
Similar articles
