Parting-off tool holder, shank height 12 mm, with HSS blade (8 % cobalt)
€30.50*
% €32.50* (6.15% saved)Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
A parting-off steel can be used either for parting off or for grooving. A major advantage of parting steel holders with HSS knives is that the knives can be resharpened depending on the application requirements. For example, the grooving width can be reduced or the angle changed by grinding the blade. The thinner the cutting edge, the more delicate the work can be. The holder also allows you to securely clamp and quickly adjust the holder.
Technical data
| Blade height [mm]: | 15 |
|---|---|
| Blade length [mm]: | 120 |
| Blade thickness [mm]: | 3 |
| Clamping shank [mm]: | 12 |
| Cobalt content in the material of the knife [%]: | 8 |
| Height of support to cutting edge [mm]: | 12,5 |
| Knife surface: | ground |
| Surface holder: | burnished |
| Tool material Knife: | HSS |
| Workpiece material: | Universal |
HSS blade: 3 x 15 x 120 mm
HSS blade with 8 % cobalt alloy for improved heat and wear resistance
Quick adjustment and secure clamping of the blade using three screws
Shank height of the holder: 12 mm
Customised grinding for universal steel processing
Description of the
The parting-off tool holder is clamped in a steel holder in order to be able to carry out parting-off and grooving work. There are three clamping screws on the top of the holder, which can be tightened or loosened using the Allen key. This allows you to quickly and securely fasten the supplied HSS blade in the holder. Measuring 120 x 15 x 3 mm, the parting-off blade is particularly suitable for parting off and grooving during your turning work.
The blade can be sharpened or ground depending on the intended use. For example, the grooving width can be reduced or the measuring angle changed. This enables universal material processing.
The narrower the cutting edge, the finer the work that can be carried out. Please note that reducing the blade width also increases the risk of vibrations at higher pressure.
The eight per cent cobalt alloy of the HSS blade also increases the heat and wear resistance and therefore the service life of the blade.
Please note that the blade is already pre-ground, but the chip breaker still needs to be ground in.
Scope of delivery
- 1 x cut-off steel holder with shank height 12 mm
- 1 x HSS blade 8 % cobalt alloyed
- 1 x Allen key
More about the brand and products fromÂ
The parting-off tool holder is clamped in a steel holder in order to be able to carry out parting-off and grooving work. There are three clamping screws on the top of the holder, which can be tightened or loosened using the Allen key. This allows you to quickly and securely fasten the supplied HSS blade in the holder. Measuring 120 x 15 x 3 mm, the parting-off blade is particularly suitable for parting off and grooving during your turning work.
The blade can be sharpened or ground depending on the intended use. For example, the grooving width can be reduced or the measuring angle changed. This enables universal material processing.
The narrower the cutting edge, the finer the work that can be carried out. Please note that reducing the blade width also increases the risk of vibrations at higher pressure.
The eight per cent cobalt alloy of the HSS blade also increases the heat and wear resistance and therefore the service life of the blade.
Please note that the blade is already pre-ground, but the chip breaker still needs to be ground in.
The parting steel holder with HSS blade has a parting width of 1.6 mm. The blade can be ground differently depending on the material of the workpiece. This enables universal material processing.
In contrast to many similar cut-off holders, this version is equipped with an eccentric clamping system. The biggest advantage of this clamping technology is the ease of use of the holder. The knife can be adjusted effortlessly with just one screw. The holder is adapted to the shape of the blade, ensuring precise and secure clamping.
The plunge-cut chisel is made from high-quality steel. The surface is hardened, ground and burnished. The burnished finish protects the surface against corrosion.
A replacement blade for the holder is also available from us.
Please note that the blade is already pre-ground. However, the chip breaker must be reground.
The matching replacement blade is also available from us.
Please note that the blade is already pre-ground, but the chip breaker still needs to be ground in.
The matching replacement blade is also available from us.
Please note that the blade is already pre-ground, but the chip breaker still needs to be ground in.
The matching replacement blade is also available from us.
Please note that the blade is already pre-ground, but the chip breaker still needs to be ground in.
The parting-off tool holder is clamped in a steel holder in order to be able to carry out parting-off and grooving work. There are three clamping screws on the top of the holder, which can be tightened or loosened using the Allen key. This allows you to quickly and securely fasten the supplied HSS blade in the holder. This parting-off tool holder is particularly suitable for small machines thanks to its low shaft height of 6 mm.
The blade can be sharpened or ground depending on the intended use. For example, the grooving width can be reduced or the measuring angle changed. This enables universal material processing.
The narrower the cutting edge, the finer the work that can be carried out. Please note that reducing the blade width also increases the risk of vibrations at higher pressure.
The eight per cent cobalt alloy of the HSS blade also increases the heat and wear resistance and therefore the service life of the blade.
Please note that the blade is already pre-ground, but the chip breaker still needs to be ground in.
In order to be able to carry out grooving and parting-off work, the parting-off steel holder is clamped in a steel holder. There are three clamping screws on the top of the holder, which can be tightened or loosened using the Allen key. This allows you to quickly and securely fasten the supplied HSS blade in the holder. Measuring 100 x 12 x 2.5 mm, the parting-off blade is particularly suitable for parting off and grooving during your turning work.
The blade can be sharpened or ground depending on the intended use. For example, the grooving width can be reduced or the measuring angle changed. This enables universal material processing.
The narrower the cutting edge, the finer the work that can be carried out. Please note that reducing the blade width also increases the risk of vibrations at higher pressure.
The eight per cent cobalt alloy of the HSS blade also increases the heat and wear resistance and therefore the service life of the blade.
Please note that the blade is already pre-ground, but the chip breaker still needs to be ground in.
The parting-off tool holder is clamped in a steel holder in order to be able to carry out parting-off and grooving work. There are three tension screws on the top of the holder, which can be tightened or loosened using the Allen key. The 153 x 19 x 3 mm cut-off blade is particularly suitable for grooving and parting off during your turning work, as these dimensions give the blade a high degree of inherent stability, which in turn helps to increase the maximum grooving depth.
The blade can be sharpened or ground depending on the intended use. For example, the plunge width can be reduced or the blade angle changed. This enables universal material processing.
The narrower the cutting edge, the finer the work that can be carried out. Please note that reducing the blade width also increases the risk of vibrations at higher pressure.
The five per cent cobalt alloy of the HSS blade also increases the heat and wear resistance and therefore the durability of the blade.
Please note that the blade is already pre-ground. However, the chip breaker must be reground.
In order to be able to carry out grooving and parting-off work, the parting-off steel holder is clamped in a steel holder. There are three clamping screws on the top of the holder, which can be tightened or loosened using the Allen key. This allows you to quickly and securely fasten the supplied HSS blade in the holder. Measuring 110 x 13 x 2 mm, the parting-off blade is particularly suitable for parting off and grooving during your turning work.
The blade can be sharpened or ground depending on the intended use. For example, the grooving width can be reduced or the measuring angle changed. This enables universal material processing.
The narrower the cutting edge, the finer the work that can be carried out. Please note that reducing the blade width also increases the risk of vibrations at higher pressure.
The eight per cent cobalt alloy of the HSS blade also increases the heat and wear resistance and therefore the service life of the blade Please note that the blade is already pre-ground, but the chip breaker still needs to be ground in.
The parting steel holder is surface-tempered by nickel plating. The nickel coating provides excellent corrosion protection. Nickel is resistant to air, water, diluted acids, lubricants and most alkalis. Another feature of nickel surfaces is their visual enhancement.
€30.50*
Content: 1 Piece
€8.00*
Content: 1 Piece
€4.50*
Content: 1 pcs
€5.50*
Content: 1 pcs
€6.50*
Content: 1 pcs
€23.50*
Content: 1 Piece
€24.50*
Content: 1 pcs
€29.00*
Content: 1 Piece
€34.00*
Content: 1 pcs
23 February 2025 14:51
Qualität stimmt und das Preis-Leistungs-Verhältnis ist top
Der Halter samt Abstechmesser ist qualitativ in Ordnung. Die Schneide ist breiter als der restliche Querschnitt und damit ist ein HeiĂŸlaufen und Verklemmen in der Abstechnut ausgeschlossen. Mit reichlich KĂ¼hlung lässt sich gut arbeiten. Ich wĂ¼rde das Werkzeug jederzeit wieder kaufen, gerade als Heimwerker ist man auf preiswerte gute Ware angewiesen.
25 December 2024 14:02
Auguri đŸ¥³đŸ’“ si il prodotto andava benissimo
Auguri đŸ¥³đŸ’“ si il prodotto andava benissimo grazie
4 July 2024 06:19
P- L gut , besser als erwartet
P- L gut , besser als erwartet
7 February 2023 13:42
Sehr gut verarbeitet und wie immer bei
Sehr gut verarbeitet und wie immer bei Paulimot sehr schnell geliefert. Ich habe eine Seite zum abstechen, die andere Seite zum Gewinde-freistechen angeschliffen - klappt prima.
14 January 2023 10:04
ErfĂ¼llt die Erwartungen voll und ganz.
ErfĂ¼llt die Erwartungen voll und ganz.
29 December 2022 16:00
Alles gut
Alles gut
6 December 2022 08:44
Verarbeitung ok. Macht was es soll.
Verarbeitung ok. Macht was es soll.
1 August 2022 09:03
Alles ok, die Werkzeuge von Paulimot waren
Alles ok, die Werkzeuge von Paulimot waren immer zu meiner Zufriedenheit.
10 June 2022 12:58
Gute Ware!
Gute Ware!
14 April 2022 17:19
Gute Qualität
Gute Qualität