Clamping claw set 58-piece M8 / 10 mm in case
€36.50*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
Clamping claws are used for fast and secure clamping of workpieces, tools and fixtures on machine tables with T-slots.
Technical data
| Clamping height (max.) [mm]: | 64 |
|---|---|
| For groove width [mm]: | 10 |
| Hardness [HRC]: | 18 - 20 |
| Thread size stud bolts: | M8 |
| Tool material: | C45E steel |
58-piece set
For 10 mm T-slot width and M8 thread
Fast and secure clamping of workpieces, tools or fixtures
Supplied in a practical, sturdy plastic case
Made from high-quality heat-treated steel
Description of the
The individual components in this set are made from C45 heat-treated steel (material number 1.0503) and have undergone heat treatment. Among other things, this leads to an increase in tensile strength.
Assembly (see picture "Assembly example")
The clamping arm (also known as a clamping claw) with a slotted hole is fastened so that one end rests on the body to be clamped. The other end rests on a support, the step block. The threaded rod is attached as close as possible to the workpiece and mounted at the lower end on a plate or the machine table. This applies the clamping force by tightening it firmly. This prevents the workpiece from slipping. This allows you to carry out your work on the workpiece safely and quickly.
The clamping claw set has a maximum clamping height of 64 mm.
The individual clamping elements are neatly stored in the practical plastic case.
Scope of delivery
- 1 x plastic case
- 6 x T-nuts
- 6 x collar nut
- 4 x extension nut
- 6 x step clamps
- 12 x step block
- 24 x stud bolt
More about the brand and products from
The individual components in this set are made from C45 heat-treated steel (material number 1.0503) and have undergone heat treatment. Among other things, this leads to an increase in tensile strength.
Assembly (see picture "Assembly example")
The clamping arm (also known as a clamping claw) with a slotted hole is fastened so that one end rests on the body to be clamped. The other end rests on a support, the step block. The threaded rod is attached as close as possible to the workpiece and mounted at the lower end on a plate or the machine table. This applies the clamping force by tightening it firmly. This prevents the workpiece from slipping. This allows you to carry out your work on the workpiece safely and quickly.
The clamping claw set has a maximum clamping height of 64 mm.
The individual clamping elements are neatly stored in the practical plastic case.
The individual components in this set are made of C235 steel and cast steel.
Assembly (see image "Assembly example")
The clamping arm (also known as a clamping claw) with a slotted hole is attached so that one end rests on the body to be clamped. The other end rests on a support, the step block. The threaded rod is attached as close as possible to the workpiece and fixed at the lower end to a plate or the machine table using a T-slot nut. A collar nut is fitted to the upper end of the stud bolt. This applies the clamping force by tightening it firmly. This means that the workpiece can no longer slip and work on the workpiece can be carried out safely and quickly.
The clamping claw set has a maximum clamping height of 64 mm.
The individual clamping elements are neatly stored in the practical wall holder.
This 10-piece clamping claw set with M6 thread for 8 mm T-slot width is suitable for secure and fast clamping of workpieces, tools and fixtures, especially on our dividing heads.
The set is suitable for the following dividing heads:
- Rotary indexing table Ø 80 mm horizontal / vertical (item no. 16200)
- Rotary indexing table Ø 80 mm swivelling horizontal / vertical (item no. 16201)
- Rotary table dividing head Ø 100 mm horizontal / vertical (item no. 16202)
- Rotary table dividing head Ø 100 mm swivelling horizontal / vertical (item no. 16203)
- Rotary indexing table Ø 105 mm swivelling horizontal / vertical (item no. 16205)
The clamping element with a slotted hole (also known as a clamping claw) is attached so that one end rests on the body to be clamped. The other end rests on a support, the step block. The threaded rod is attached as close as possible to the workpiece and fixed at the lower end to one of our rotary tables (item no. 16200, 16201, 16202, 16203 or 16205) using a T-slot nut. A collar nut is fitted to the upper end of the stud bolt. This applies the clamping force by tightening it firmly. Now the workpiece can no longer slip and you can carry out your work safely and quickly.
The clamping claw set can be used for workpieces with a maximum height of 20 mm.
Please note that the clamping claw set is not compatible with the VERTEX rotary tables!
This 10-piece clamping claw set with M6 thread is suitable for secure and fast clamping of workpieces, tools and fixtures.
Material properties
The individual components in this set are made from C45 heat-treated steel (material number 1.0503) and have undergone heat treatment. Among other things, this leads to an increase in tensile strength.
Manufacturer's hardness specifications for all components: 32 HRC
Assembly
The clamping element (step block) with a slotted hole is fastened so that one end rests on the body to be clamped and the other end rests on a step clamp. The stud bolt is attached as close as possible to the workpiece and fixed at the lower end to a plate or the machine table. A collar nut is fitted to the upper end of the stud bolt. This applies the clamping force by tightening it firmly so that the workpiece can no longer slip. This allows you to work safely and quickly on the workpiece.
The clamping claw set can be used for workpieces with a maximum height of 64 mm.
The individual components in this set are made of C235 steel and cast steel.
Assembly (see image "Assembly example")
The clamping arm (also known as a clamping claw) with a slotted hole is attached so that one end rests on the body to be clamped. The other end rests on a support, the step block. The threaded rod is attached as close as possible to the workpiece and fixed at the lower end to a plate or the machine table using a T-slot nut. A collar nut is fitted to the upper end of the stud bolt. This applies the clamping force by tightening it firmly. This means that the workpiece can no longer slip and work on the workpiece can be carried out safely and quickly.
The clamping claw set has a maximum clamping height of 64 mm.
The individual clamping elements are neatly stored in the practical wall holder.
10-piece clamping claw set for 10 mm T-slot width and M8 thread.
This set is used for quick clamping of workpieces, tools or fixtures.
Material properties
The individual components in this set are made from C45 heat-treated steel (material number 1.0503) and have undergone heat treatment. Among other things, this leads to an increase in tensile strength.manufacturer's hardness specifications for all components: 32 HRC
Assembly
The clamping element (step block) with a slotted hole is fastened so that one end rests on the body to be clamped and the other end rests on a step clamp. The stud bolt is attached as close as possible to the workpiece and fixed at the lower end to a plate or the machine table. A collar nut is fitted to the upper end of the stud bolt. This applies the clamping force by tightening it firmly so that the workpiece can no longer slip. This allows you to work safely and quickly on the workpiece.
The clamping claw set can be used for workpieces with a maximum height of 64 mm.
The individual components in this set are made of C235 steel and cast steel.
Assembly (see image "Assembly example")
The clamping arm (also known as a clamping claw) with a slotted hole is attached so that one end rests on the body to be clamped. The other end rests on a support, the step block. The threaded rod is attached as close as possible to the workpiece and fixed at the lower end to a plate or the machine table using a T-slot nut. A collar nut is fitted to the upper end of the stud bolt. This applies the clamping force by tightening it firmly. This means that the workpiece can no longer slip and work on the workpiece can be carried out safely and quickly.
The clamping claw set has a maximum clamping height of 64 mm.
The individual clamping elements are neatly stored in the practical wall holder.
The individual components in this set are made from C45 heat-treated steel (material number 1.0503) and have undergone heat treatment. Among other things, this leads to an increase in tensile strength.
Assembly (see picture "Assembly example")
The clamping arm (also known as a clamping claw) with a slotted hole is fastened so that one end rests on the body to be clamped. The threaded rod is attached as close as possible to the workpiece and fastened at the lower end to a plate or the machine table using a T-nut. A collar nut is fitted to the upper end of the stud bolt. This applies the clamping force by tightening it firmly. This prevents the workpiece from slipping. This allows you to work on the workpiece safely and quickly.
The clamping claw set has a maximum clamping height of 64 mm.
The individual clamping elements are neatly stored in the practical plastic case.
10-piece clamping claw set for 12 mm T-slot width and M10 thread.
This set is used for quick clamping of workpieces, tools or fixtures.
Material properties
The individual components in this set are made from C45 heat-treated steel (material number 1.0503) and have undergone heat treatment. Among other things, this leads to an increase in tensile strength.manufacturer's hardness specifications for all components: 32 HRC
Assembly
The clamping element (step block) with a slotted hole is fastened so that one end rests on the body to be clamped and the other end rests on a step clamp. The stud bolt is attached as close as possible to the workpiece and fixed at the lower end to a plate or the machine table. A collar nut is fitted to the upper end of the stud bolt. This applies the clamping force by tightening it firmly so that the workpiece can no longer slip. This allows you to work safely and quickly on the workpiece.
The clamping claw set can be used for workpieces with a maximum height of 64 mm
The individual components in this set are made from C45 heat-treated steel (material number 1.0503) and have undergone heat treatment. Among other things, this leads to an increase in tensile strength.
Assembly (see picture "Assembly example")
The clamping arm (also known as a clamping claw) with a slotted hole is fastened so that one end rests on the body to be clamped. The other end rests on a support, the step block. The threaded rod is attached as close as possible to the workpiece and fixed at the lower end to a plate or the machine table using a T-slot nut. A collar nut is fitted to the upper end of the stud bolt. This applies the clamping force by tightening it firmly. This prevents the workpiece from slipping. This allows you to work on the workpiece safely and quickly.
The clamping claw set has a maximum clamping height of 70 mm.
The individual clamping elements are neatly stored in the practical plastic case.
The individual components in this set are made of C235 steel and cast steel.
Assembly (see picture "Assembly example")
The clamp with a slotted hole (also known as a clamping claw) is attached so that one end rests on the body to be clamped. The other end rests on a support, the step block. The threaded rod is attached as close as possible to the workpiece and fixed at the lower end to a plate or the machine table using a T-slot nut. A collar nut is fitted to the upper end of the stud bolt. This applies the clamping force by tightening it firmly. This means that the workpiece can no longer slip and work on the workpiece can be carried out safely and quickly.
The clamping claw set has a maximum clamping height of 70 mm.
The individual clamping elements are neatly stored in the practical wall holder.
10-piece clamping claw set for 14 mm T-slot width and M12 thread.
This set is used for quick clamping of workpieces, tools or fixtures.
Material properties
The individual components in this set are made from C45 heat-treated steel (material number 1.0503) and have undergone heat treatment. Among other things, this leads to an increase in tensile strength.manufacturer's hardness specifications for all components: 32 HRC
Assembly
The clamping element (step block) with a slotted hole is fastened so that one end rests on the body to be clamped and the other end rests on a step clamp. The stud bolt is attached as close as possible to the workpiece and fixed at the lower end to a plate or the machine table. A collar nut is fitted to the upper end of the stud bolt. This applies the clamping force by tightening it firmly so that the workpiece can no longer slip. This allows you to work safely and quickly on the workpiece.
The clamping claw set can be used for workpieces with a maximum height of 70 mm
€36.50*
Content: 1 pcs
€25.50*
Content: 1 pcs
€13.00*
Content: 1 Piece
€15.50*
Content: 1 pcs
€30.00*
Content: 1 pcs
€16.50*
Content: 1 pcs
€33.00*
Content: 1 pcs
€39.50*
Content: 1 pcs
€18.00*
Content: 1 pcs
€42.50*
Content: 1 pcs
€36.00*
Content: 1 pcs
€26.00*
Content: 1 pcs
5 March 2024 12:19
Für den Preis reichlich Zubehör
Für den Preis reichlich Zubehör
20 November 2023 17:23
Enorm viel billiges Plastik um diese Teile.
Der Inhalt ist wohl ganz gut, etwas übersortiert vielleicht. Der Koffer rundherum kommt ziemlich peinlich daher.
27 January 2023 08:51
Sehr gute Qualität und schnelle Lieferung
Sehr gute Qualität und schnelle Lieferung
10 October 2022 07:19
Alles zur vollen Zufriedenheit gelaufen, immer gern
Alles zur vollen Zufriedenheit gelaufen, immer gern wieder.
10 May 2022 09:29
Wie ich mir das vorgestellt habe sehr
Wie ich mir das vorgestellt habe sehr gut
2 February 2022 00:00
Top
Ein Top-Set da sehr viel enthalten ist und auch hochwertig gefertigt wurde. Einziges Manko, dass ich gleich bei der ersten Anwendung kürzere Stehbolzen benötigt hätte.
3 October 2021 00:00
unbedingt zum Kreuztisch dazu kaufen, weil ohne, ist Mann auf geschmissen
Guten Tag, 03.X. 2021 vorneweg für die Spannpratzen im Koffer gibt es fünf Sterne. Vor der ersten Nutzung sollte Mann sich ausreichend Zeit nehmen, um den Kofferinhalt zu entölen. Meiner Ansicht nach, wäre er mit weniger Öl auch noch sehr gut konserviert. Mit dem Öl im Koffer habe ich alle Türen und Fenster im Haus geschmiert, den Traktor eingeölt und noch einen Rest da stehen, falls doch noch was quietscht. Die Zusammenstellung des Kofferinhaltes ist Praxis konform und Anwendungs- sicher im Handling. Es ist alles da was Mann braucht um auch anders oder ungewöhnlich geformte Gegenstände zum verarbeiten auf dem Kreuztisch fest zu spannen. Für die Spannpratzen im Koffer hat Mann ein gutes Preis / Leistungsverhältnis und erhält für den semiprofessionellen Bereich eine sehr gute Unterstützung um sauber und erfolgreich sowie maßhaltig arbeiten zu können. Für den Koffer gibt es die KAUFEMPFEHLUNG, da alles gestimmt hat, von der Bestellung bis zur flotten Lieferung, und Praxis gerechten Anwendung. Dafür ein Herzliches Dankeschön an das Team PAULIMOT aus dem Saarland, bis zum nächstenmal.
3 September 2021 00:00
Passt gut, Qualität in Ordnung
Die Spannpratzen spannen ... das ist so gewünscht.
16 July 2021 00:00
super Koffer
Ich bin froh, dass ich mir das Spannpratzen-set-58-teilig-m8/10-mm-im-koffer gekauft habe. Für mich als Heimwerker ist der Inhalt mehr als genug. Beruflich hätte ich auch öfters diese Pratzen brauchen können, da ich manchmal Fräsarbeiten machte.
26 June 2021 00:00
Spannpratzen
Ich bin mit dem Spannpratzen-Set 58 teilig M8/10 im Koffer sehr, sehr zufrieden.