Cross table made of aluminium 310 x 90 mm with round column guide
€43.50*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
A cross table is used on both milling and drilling machines. As a cross table can be moved in both the X and Y axes, the workpiece can be positioned exactly under the tool. This allows precise drilling and milling work to be carried out.
Technical data
| Material cross table: | Aluminium |
|---|---|
| Number of T-slots: | 3 |
| Size of the T-slots [mm]: | 8 |
| T-slot spacing [mm]: | 33,5 |
| Table size [mm]: | 310 x 90 |
| Total height [mm]: | 80 |
| X-axis travel [mm]: | 170 |
| Y-axis travel [mm]: | 52 |
Work table 310 x 90 mm made of aluminium
Backlash-free round column guide
Three continuous T-slots
Suitable for light drilling and milling work
Including clamping set
Description of the
This cross table is made of aluminium and is therefore particularly suitable for light drilling and milling work. The spindles and round columns are made of steel. The worktable has three continuous T-slots with a width of 8 mm for T-nuts with M6 thread. The workpiece is fixed in the desired position on the worktable using clamping claws, hold-down clamps or similar. The cross table can be moved in the X and Y directions using the handwheels. The travel distance can be read quickly and easily via a sliding measuring scale on the X-axis. Both axes are precisely guided by round columns. In addition, the spindle of the X-axis has ball bearings on both sides. Both the X and Y axes can be fixed using a clamping screw.
Scope of delivery
- 1 x cross table 310 x 90 mm
- 2 x hand crank with screw
- 2 x clamping claw 42 x 20 x 8 mm
- 2 x step block
- 2 x hexagon head screw M8 x 40
- 2 x nut M8
- 1 x Allen key
More about the brand and products from
This cross table is made of aluminium and is therefore particularly suitable for light drilling and milling work. The spindles and round columns are made of steel. The worktable has three continuous T-slots with a width of 8 mm for T-nuts with M6 thread. The workpiece is fixed in the desired position on the worktable using clamping claws, hold-down clamps or similar. The cross table can be moved in the X and Y directions using the handwheels. The travel distance can be read quickly and easily via a sliding measuring scale on the X-axis. Both axes are precisely guided by round columns. In addition, the spindle of the X-axis has ball bearings on both sides. Both the X and Y axes can be fixed using a clamping screw.
This cross table is made of aluminium and is therefore particularly suitable for light drilling and milling work. The work table has three continuous T-slots with a width of 8 mm for T-nuts with an M6 thread. The workpiece is fixed in the desired position on the worktable using clamping claws, hold-down clamps or similar. The cross table can be moved in the X and Y directions using the handwheels fitted with a vernier. The travel distance can be read quickly and easily via a sliding measuring scale on the X-axis. The dovetail guides can be adjusted backlash-free using pressure bars. The spindle of the Y-axis is protected from falling chips by a cover.
This cross table is made of aluminium and is therefore particularly suitable for light drilling and milling work. The work table has three continuous T-slots with a width of 8 mm for T-nuts with an M6 thread. The workpiece is fixed in the desired position on the worktable using clamping claws, hold-down clamps or similar. The cross table can be moved in the X and Y directions using the handwheels fitted with a vernier. The travel distance can be read quickly and easily via a sliding measuring scale on the X-axis. The dovetail guides can be adjusted backlash-free using pressure bars. The spindle of the Y-axis is protected from falling chips by a cover.
This cross table is made of aluminium and is therefore particularly suitable for light drilling and milling work. The work table has three continuous T-slots with a width of 8 mm for T-nuts with an M6 thread. The workpiece is fixed in the desired position on the worktable using clamping claws, hold-down clamps or similar. The cross table can be moved in the X and Y directions using the handwheels fitted with a vernier. The travel distance can be read quickly and easily via a sliding measuring scale on the X-axis. The dovetail guides can be adjusted backlash-free using pressure bars. The spindle of the Y-axis is protected from falling chips by a cover.
This cross table is made of aluminium and is therefore particularly suitable for light drilling and milling work. The work table has three continuous T-slots with a width of 8 mm for T-nuts with an M6 thread. The workpiece is fixed in the desired position on the worktable using clamping claws, hold-down clamps or similar. The cross table can be moved in the X and Y directions using the handwheels fitted with a vernier. The travel distance can be read quickly and easily via a sliding measuring scale on the X-axis. The dovetail guides can be adjusted backlash-free using pressure bars. The spindle of the Y-axis is protected from falling chips by a cover.
The clamping table and support of this cross table are made of aluminium. This makes it particularly suitable for light drilling and milling work. The base is made of cast iron, the spindles and round columns are made of steel. The worktable has three continuous T-slots with a width of 8 mm for T-nuts with M6 threads. The workpiece is fixed in the desired position on the worktable using clamping claws, hold-down clamps or similar. The cross table can be moved in the X and Y directions using the handwheels. The travel distance can be read quickly and easily via a sliding measuring scale on the X-axis. Both axes are precisely guided by round columns and also have ball bearings on both sides. Both the X and Y axes can be fixed using a clamping screw.
€43.50*
Content: 1 pcs
€25.00*
Content: 1
€30.50*
Content: 1 pcs
€29.50*
Content: 1
€37.00*
Content: 1 pcs
€94.00*
Content: 1 pcs
23 January 2025 18:49
Alles Ok.
Ordentliche Verarbeitung Preis-/Leistung sehr gut. Würde ich wieder kaufen
17 January 2025 15:44
Fräßtisch
Sehr schnelle Lieferung, ausgezeichnetes Produkt.
6 June 2024 22:24
Still under testing but not bad thing
Still under testing but not bad thing
23 November 2023 16:46
Für meine Zwecke sehr hilfreich und solide
Für meine Zwecke sehr hilfreich und solide verarbeitet.
2 August 2023 19:28
Solide verarbeiteter kleiner Kreuztisch
Ich habe diesen kleinen Kreuztisch zum Fräsen einer 15 mm starken Aluminium-Platte mit meiner Standbohrmaschine gekauft. Auch wenn es mühsam war, hat der Kreuztisch seine Arbeit hervorragend verrichtet-auch wenn er für solche groben Arbeiten sicher nicht gedacht ist. Auch nach stundenlangem Fräsen mit teils enormen Vibrationen funktioniert er immer noch tadellos. Das Projekt ist super geworden und somit war der Kauf für mich sehr lohnend. Ich würde das Produkt wieder kaufen. Klare Empfehlungen für das Geld.
30 June 2023 11:12
Preis -Leistung unschlagbar
Preis -Leistung unschlagbar
2 March 2023 15:07
Wahre wie beschrieben,etwas viel Spiel an den
Wahre wie beschrieben,etwas viel Spiel an den Spindeln. Habe mir Feingewindespindeln gedreht,nun Tischspiel 0,02mm
1 March 2023 09:12
sehr gute Qualität; gute Verpackung der Lieferung;
sehr gute Qualität; gute Verpackung der Lieferung; sehr schnelle Lieferung.
1 March 2023 09:12
Solide Verarbeitung, super Preis. Die Gewinde für
Solide Verarbeitung, super Preis. Die Gewinde für die Kurbeln waren schwergängig.
11 January 2023 08:53
Produkt und Lieferung einwandfrei
Produkt und Lieferung einwandfrei