Mounting flange for ER32 collets Ø 125 mm
€47.00*
% €48.50* (3.09% saved)Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
With a mounting flange for collets, these can also be used on a lathe. In contrast to clamping with three-jaw or four-jaw chucks, clamping with collets ensures that the material is clamped cleanly and gently, and pressure marks are avoided, especially on softer workpieces. As a rule, collet systems have a higher concentricity compared to lathe chucks.
Technical data
| Concentricity deviation max. [mm]: | 0.025 (10 mm) / 0.04 (50 mm) |
|---|---|
| Cylindrical internal fit [mm]: | 95 |
| Diffuser [mm]: | 24 |
| Drill holes: | 3 x M8 |
| Max. revolutions [rpm].: | 1.400 |
| Outer diameter Ø [mm]: | 125 |
| Pitch circle [mm]: | 108 |
| Recording: | Cylindrical holder |
| Total height (incl. union nut) [mm]: | 50 |
| Material: | Steel, hardened and ground |
Made of steel, hardened and ground
For holding ER32 collets
For clean and gentle clamping, even of smaller diameters
Concentricity deviation max.: 0.025 mm with 10 mm overhung / 0.04 mm with 50 mm overhung
Description of the
This mounting flange for ER32 collets is made of hardened steel, the surfaces are ground. The flange can be mounted on lathes with a 125 mm cylindrical holder instead of a lathe chuck. The clearance is 24 mm.
Procedure for inserting ER collets:
- Insert the groove of the collet at an angle into the eccentric ring of the union nut until it audibly engages.
- Screw the union nut with the inserted collet into the mounting flange.
Scope of delivery
- 1 x mounting flange for ER32 collets Ø 125 mm
- 1 x hook spanner for ER32
More about the brand and products from
This mounting flange for ER32 collets is made of hardened steel, the surfaces are ground. The flange can be mounted on lathes with a 125 mm cylindrical holder instead of a lathe chuck. The clearance is 24 mm.
Procedure for inserting ER collets:
- Insert the groove of the collet at an angle into the eccentric ring of the union nut until it audibly engages.
- Screw the union nut with the inserted collet into the mounting flange.
This mounting flange for ER32 collets is made of hardened steel, the surfaces are ground. The flange can be mounted on lathes with a 100 mm cylindrical holder instead of a lathe chuck. The clearance is 24 mm.
Procedure for inserting ER collets:
- Insert the groove of the collet at an angle into the eccentric ring of the union nut until it audibly engages.
- Screw the union nut with the inserted collet into the mounting flange.
This mounting flange for ER32 collets is made of hardened steel, the surfaces are ground. The flange can be mounted on lathes with a 160 mm holder with a cylindrical holder instead of a lathe chuck. The clearance is 24 mm.
Procedure for inserting ER collets:
- Insert the groove of the collet at an angle into the eccentric ring of the union nut until it audibly engages.
- Screw the union nut with the inserted collet into the mounting flange.
This mounting flange for ER32 collets is made of hardened steel, the surfaces are ground. The flange can be mounted on lathes with a 200 mm cylindrical holder instead of a lathe chuck. The clearance is 24 mm.
Procedure for inserting ER collets:
- 1. insert the groove of the collet at an angle into the eccentric ring of the union nut until it audibly engages.
- 2 Screw the union nut with the inserted collet chuck into the mounting flange.
This mounting flange for ER32 collets is made of hardened steel, the surfaces are ground. The flange can be mounted on lathes with an 80 mm cylindrical holder instead of a lathe chuck. The clearance is 24 mm.
Procedure for inserting ER collets:
1. insert the groove of the collet at an angle into the eccentric ring of the union nut until it audibly engages.
2 Screw the union nut with the inserted collet chuck into the mounting flange.
€47.00*
Content: 1 pcs
€46.50*
Content: 1 pcs
€73.50*
Content: 1 pcs
€123.50*
Content: 1 pcs
€46.00*
Content: 1 pcs
27 February 2025 16:58
Top Preis-Leistung
Einfache und Zweckmäßige Konstruktion , solide Verarbeitung!
20 December 2024 06:34
Toller Aufnahmeflansch
Sehr guter Aufnahmeflansch, Nach ausrichten auf der Maschine mit sehr guter Rundlaufgenauigkeit. Absolut empfehlenswert.
5 June 2024 16:51
Tolles. Teil.
Qualität ist gut. Montage mit den 3 Imbus Schrauben ist eine ganz schöne Fummelei.
10 March 2023 10:03
El producto está bien, PERO me gustaría
El producto está bien, PERO me gustaría que quedase más ajustado en la nariz del husillo... es decir, que quedase algo más apretado...
31 January 2023 11:44
Preis Leistung OK. Würde ich wieder kaufen.
Preis Leistung OK. Würde ich wieder kaufen.
14 January 2023 14:31
Preis/Leistung wie immer sehr gut
Preis/Leistung wie immer sehr gut
6 December 2022 18:57
Einwandfrei, ich bin sehr zufrieden
Einwandfrei, ich bin sehr zufrieden
31 May 2022 09:08
Paulimot ist eine wirklich gute Wahl des Einkaufs. Gute Qualität und guter Preis.
Gute Qualität und saubere Verarbeitung des Werkzeuges. Passgenauigkeit entspricht meinen Vorstellungen. Keine Abweichungen zwischen Spindelflansch und Spannzangenflansch. Im Bereich von 1/100stel mm ist wirklich akzeptabel. Für die am Meisten getätigten Dreharbeiten ein wichtiges Werkzeug und schnell Umrüstbar. Wellen von 2 mm lassen sich auch noch gut bearbeiten. Kann man dem anspruchsvollen Modellbauer nur empfehlen. Einkauf unproblematisch und der professionellen Unterstützung des Anbieters jederzeit zu empfehlen. Bin sehr zufrieden und kann die Abwicklung des Kaufes als sehr gut bezeichnen.
perfekt wie immer
19 March 2022 08:44
Excellent quality and presentation. I would buy
Excellent quality and presentation. I would buy it again.