Mounting flange for ER32 collets Ø 160 mm
€73.50*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
With a mounting flange for collets, these can also be used on a lathe. In contrast to clamping with three-jaw or four-jaw chucks, clamping with collets ensures that the material is clamped cleanly and gently, and pressure marks are avoided, especially on softer workpieces. As a rule, collet systems have a higher concentricity compared to lathe chucks.
Technical data
| Concentricity deviation max. [mm]: | 0.025 (10 mm) / 0.04 (50 mm) |
|---|---|
| Cylindrical internal fit [mm]: | 130 |
| Diffuser [mm]: | 24 |
| Drill holes: | 3 x M8 |
| Max. revolutions [rpm].: | 1.400 |
| Outer diameter Ø [mm]: | 160 |
| Pitch circle [mm]: | 142 |
| Recording: | Cylindrical holder |
| Total height (incl. union nut) [mm]: | 50 |
| Material: | Steel, hardened and ground |
Made of steel, hardened and ground
For holding ER32 collets
For clean and gentle clamping, even of smaller diameters
Concentricity deviation max.: 0.025 mm with 10 mm overhung / 0.04 mm with 50 mm overhung
Description of the
This mounting flange for ER32 collets is made of hardened steel, the surfaces are ground. The flange can be mounted on lathes with a 160 mm holder with a cylindrical holder instead of a lathe chuck. The clearance is 24 mm.
Procedure for inserting ER collets:
- Insert the groove of the collet at an angle into the eccentric ring of the union nut until it audibly engages.
- Screw the union nut with the inserted collet into the mounting flange.
Scope of delivery
- 1 x mounting flange for ER32 collets Ø 160 mm
- 1 x hook spanner for ER32
More about the brand and products from
This mounting flange for ER32 collets is made of hardened steel, the surfaces are ground. The flange can be mounted on lathes with a 160 mm holder with a cylindrical holder instead of a lathe chuck. The clearance is 24 mm.
Procedure for inserting ER collets:
- Insert the groove of the collet at an angle into the eccentric ring of the union nut until it audibly engages.
- Screw the union nut with the inserted collet into the mounting flange.
This mounting flange for ER32 collets is made of hardened steel, the surfaces are ground. The flange can be mounted on lathes with a 100 mm cylindrical holder instead of a lathe chuck. The clearance is 24 mm.
Procedure for inserting ER collets:
- Insert the groove of the collet at an angle into the eccentric ring of the union nut until it audibly engages.
- Screw the union nut with the inserted collet into the mounting flange.
This mounting flange for ER32 collets is made of hardened steel, the surfaces are ground. The flange can be mounted on lathes with a 125 mm cylindrical holder instead of a lathe chuck. The clearance is 24 mm.
Procedure for inserting ER collets:
- Insert the groove of the collet at an angle into the eccentric ring of the union nut until it audibly engages.
- Screw the union nut with the inserted collet into the mounting flange.
This mounting flange for ER32 collets is made of hardened steel, the surfaces are ground. The flange can be mounted on lathes with a 200 mm cylindrical holder instead of a lathe chuck. The clearance is 24 mm.
Procedure for inserting ER collets:
- 1. insert the groove of the collet at an angle into the eccentric ring of the union nut until it audibly engages.
- 2 Screw the union nut with the inserted collet chuck into the mounting flange.
This mounting flange for ER32 collets is made of hardened steel, the surfaces are ground. The flange can be mounted on lathes with an 80 mm cylindrical holder instead of a lathe chuck. The clearance is 24 mm.
Procedure for inserting ER collets:
1. insert the groove of the collet at an angle into the eccentric ring of the union nut until it audibly engages.
2 Screw the union nut with the inserted collet chuck into the mounting flange.
€73.50*
Content: 1 pcs
€46.50*
Content: 1 pcs
€47.00*
Content: 1 pcs
€123.50*
Content: 1 pcs
€46.00*
Content: 1 pcs
21 January 2023 11:38
ER Spannzangenhalter für SC 10
Gute Qualität
23 June 2022 09:58
Sauber verarbeiteter Flansch, läuft absolut zentrisch und
Sauber verarbeiteter Flansch, läuft absolut zentrisch und auch das Gewinde Mutter/Flansch lässt sich ohne haken oder verkanten sauber verschrauben.
2 April 2021 00:00
Aufnahmeflansch
Vom ersten Eindruck... Praxistest folgt noch
11 November 2019 00:00
soweit alles ok
soweit alles ok
19 June 2014 00:00
super
Qualität prima. In Kombination mit dem Spannzangenset 11003 wirklich zu empfehlen! Bestellabwicklung wie von paulimot gewohnt :o)!