Machine vice 100 mm jaw width
€178.00*
% €184.00* (3.26% saved)Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
Less than 10 pieces available (online and in specialist shops)
Description of the
Machine vice, ground on all sides, with prism jaw, accuracy 0.005 mm
Jaw width: 100 mm
Jaw height: 45 mm
Clamping range max.: 119 mm
Total height: 95 mm
More about the brand and products from
Machine vice, ground on all sides, with prism jaw, accuracy 0.005 mm
Jaw width: 100 mm
Jaw height: 45 mm
Clamping range max.: 119 mm
Total height: 95 mm
Machine vice, ground on all sides, with prism jaw, accuracy 0.005 mm
Jaw width: 50 mm
Jaw height: 25 mm
Clamping range max.: 60 mm
Total height: 50 mm
This small vice, ground on all sides, is suitable for fine drilling and milling work. Its quick-adjustment mechanism enables rapid presetting of the four clamping ranges. The movable jaw can be clamped within these ranges using the spindle. This quick adjustment makes it particularly easy to switch between workpieces of different sizes. The handle is knurled for a good grip. A cross hole is provided at the end of the handle. A shaft with the appropriate diameter can be inserted into this cross hole, which can then be used as a lever to increase the clamping force. The vice can be attached to a machine table using the elongated holes on the side and the hammerhead screws included in the scope of delivery.
Machine vice, ground on all sides, with prism jaw, accuracy 0.005 mm
Jaw width: 63 mm
Jaw height: 31 mm
Clamping range max.: 80 mm
Total height: 63 mm
Machine vice, ground on all sides, with prism jaw, accuracy 0.005 mm
Jaw width: 80 mm
Jaw height: 40 mm
Clamping range max.: 95 mm
Total height: 84 mm
This vice is ground on all sides and is suitable for drilling and milling work. Its quick-adjustment mechanism enables rapid presetting of the eight clamping ranges. The movable jaw can be clamped within these ranges using the spindle. This quick adjustment makes it particularly easy to change between workpieces of different sizes. The handle is knurled for a good grip. A cross hole is provided at the end of the handle. A shaft with an appropriate diameter can be inserted into this cross hole, which can then be used as a lever to increase the clamping force. The vice can be attached to a machine table using the elongated holes on the side.
€178.00*
Content: 1 pcs
€57.00*
Content: 1 pcs
€59.90*
Content: 1 pcs
€75.00*
Content: 1 pcs
€113.00*
Content: 1 pcs
€127.00*
Content: 1 pcs
27 September 2022 11:41
Sauber und ordentlich verarbeitet.
Schraubstock ist genau gearbeitet,sehr gut zum einspannen. Für größere Werkstücke ist es besser mit zwei Schraubstöcken zu spannen. Werde mir noch einen kaufen.
16 December 2021 00:00
Sehr schöner Schraubstock
Das ist Qualität zum günstigen Preis. Da macht es Spaß, das Werkstück einzuspannen. Super präzise, sehr gutes Haltevermögen und durch die seitlichen Nuten sehr gut mit Spannpratzen zu fixieren.
20 November 2020 00:00
Alles Ok
Alles Ok
29 July 2020 00:00
Alles gut mit Paulimot
Sauber verarbeitet, erfüllt meine Anforderungen
6 April 2019 00:00
Schöner Maschinenschraubstock
Top bearbeitet. Schnell geliefert.
9 June 2016 00:00
Top!
sehr gut verarbeitet! Wünschenswert wären spezielle Spannpratzen für Schraubstöcke zur Aufspannung - als Zubehör
19 April 2016 00:00
Die Ware hielt, was das Angebot versprach!
Alles ok, gerne wieder!