SIEG vice, ground, quick adjustment 50 mm jaw width
€59.90*
% €69.50* (13.81% saved)Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
Less than 10 pieces available (online and in specialist shops)
Intended use
A vice is used to clamp workpieces properly so that drilling and milling work can be carried out safely on machine tools (e.g. drilling machines or drilling/milling machines).
Technical data
| Base area [mm]: | 95 x 60 |
|---|---|
| Jaw height [mm]: | 16 |
| Jaw width [mm]: | 50 |
| Net weight [kg]: | 0,76 |
| Span (max.) [mm]: | 38 |
| Surface: | ground |
| Total height [mm]: | 41 |
| Material: | Steel |
50 mm jaw width, 38 mm maximum clamping width
User-friendly thanks to quick adjustment mechanism
Suitable for fine drilling and milling work
Fixed jaw with vertical and horizontal prism for clamping cylindrical workpieces
Good clamping options thanks to two slotted holes
Description of the
This small vice, ground on all sides, is suitable for fine drilling and milling work. Its quick-adjustment mechanism enables rapid presetting of the four clamping ranges. The movable jaw can be clamped within these ranges using the spindle. This quick adjustment makes it particularly easy to switch between workpieces of different sizes. The handle is knurled for a good grip. A cross hole is provided at the end of the handle. A shaft with the appropriate diameter can be inserted into this cross hole, which can then be used as a lever to increase the clamping force. The vice can be attached to a machine table using the elongated holes on the side and the hammerhead screws included in the scope of delivery.
Scope of delivery
- 1 x SIEG vice, ground, quick adjustment 50 mm jaw width
- 2 x M6 hammerhead screw
- 2 x washer M6
- 2 x nut M6
Videos
More about the brand and products from
This small vice, ground on all sides, is suitable for fine drilling and milling work. Its quick-adjustment mechanism enables rapid presetting of the four clamping ranges. The movable jaw can be clamped within these ranges using the spindle. This quick adjustment makes it particularly easy to switch between workpieces of different sizes. The handle is knurled for a good grip. A cross hole is provided at the end of the handle. A shaft with the appropriate diameter can be inserted into this cross hole, which can then be used as a lever to increase the clamping force. The vice can be attached to a machine table using the elongated holes on the side and the hammerhead screws included in the scope of delivery.
Machine vice, ground on all sides, with prism jaw, accuracy 0.005 mm
Jaw width: 50 mm
Jaw height: 25 mm
Clamping range max.: 60 mm
Total height: 50 mm
Machine vice, ground on all sides, with prism jaw, accuracy 0.005 mm
Jaw width: 63 mm
Jaw height: 31 mm
Clamping range max.: 80 mm
Total height: 63 mm
Machine vice, ground on all sides, with prism jaw, accuracy 0.005 mm
Jaw width: 80 mm
Jaw height: 40 mm
Clamping range max.: 95 mm
Total height: 84 mm
Machine vice, ground on all sides, with prism jaw, accuracy 0.005 mm
Jaw width: 100 mm
Jaw height: 45 mm
Clamping range max.: 119 mm
Total height: 95 mm
This vice is ground on all sides and is suitable for drilling and milling work. Its quick-adjustment mechanism enables rapid presetting of the eight clamping ranges. The movable jaw can be clamped within these ranges using the spindle. This quick adjustment makes it particularly easy to change between workpieces of different sizes. The handle is knurled for a good grip. A cross hole is provided at the end of the handle. A shaft with an appropriate diameter can be inserted into this cross hole, which can then be used as a lever to increase the clamping force. The vice can be attached to a machine table using the elongated holes on the side.
€59.90*
Content: 1 pcs
€57.00*
Content: 1 pcs
€75.00*
Content: 1 pcs
€113.00*
Content: 1 pcs
€178.00*
Content: 1 pcs
€127.00*
Content: 1 pcs
6 January 2025 13:47
Preis Leistung ist seht git
Preis Leistung ist seht git
17 August 2024 10:59
Ein Superteil nachdem ich es entfettet und
Ein Superteil nachdem ich es entfettet und an einigen Stellen die scharfen Kanten leicht nachbearbeitet hatte.
12 October 2022 10:53
Klein und fein!
Klein und fein!
5 February 2022 00:00
Schraubstock-geschliffen-schnellverstellung-50-mm-backenbreite
Klein aber fein! Wie immer schnelle Bestellabwicklung!
11 October 2021 00:00
Schraubstock geschliffen
Ich benutze ihn für Fräsarbeiten. dafür ist er sehr gut geeignet. Da wackelt nichts. Würde ich wieder kaufen.
29 April 2021 00:00
Schraubstock Ware gut
Die Qualität des Schraubstockes ist gut leider ist er in sehr sehr viel Fett verpackt