Clamping claw set 58-piece M10 / 12 mm in case
€39.50*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
Clamping claws are used for fast and secure clamping of workpieces, tools and fixtures on machine tables with T-slots.
Technical data
| Clamping height (max.) [mm]: | 64 |
|---|---|
| For groove width [mm]: | 12 |
| Hardness [HRC]: | 18 - 20 |
| Thread size stud bolts: | M10 |
| Tool material: | C45E steel |
58-piece set
For 12 mm T-slot width and M10 thread
Fast and secure clamping of workpieces, tools or fixtures
Supplied in a practical, sturdy plastic case
made from high-quality heat-treated steel
Description of the
The individual components in this set are made from C45 heat-treated steel (material number 1.0503) and have undergone heat treatment. Among other things, this leads to an increase in tensile strength.
Assembly (see picture "Assembly example")
The clamping arm (also known as a clamping claw) with a slotted hole is fastened so that one end rests on the body to be clamped. The threaded rod is attached as close as possible to the workpiece and fastened at the lower end to a plate or the machine table using a T-nut. A collar nut is fitted to the upper end of the stud bolt. This applies the clamping force by tightening it firmly. This prevents the workpiece from slipping. This allows you to work on the workpiece safely and quickly.
The clamping claw set has a maximum clamping height of 64 mm.
The individual clamping elements are neatly stored in the practical plastic case.
Scope of delivery
- 1 x plastic case
- 6 x T-nuts
- 6 x collar nut
- 4 x extension nut
- 6 x step clamps
- 12 x step block
- 24 x stud bolt
More about the brand and products from
The individual components in this set are made from C45 heat-treated steel (material number 1.0503) and have undergone heat treatment. Among other things, this leads to an increase in tensile strength.
Assembly (see picture "Assembly example")
The clamping arm (also known as a clamping claw) with a slotted hole is fastened so that one end rests on the body to be clamped. The threaded rod is attached as close as possible to the workpiece and fastened at the lower end to a plate or the machine table using a T-nut. A collar nut is fitted to the upper end of the stud bolt. This applies the clamping force by tightening it firmly. This prevents the workpiece from slipping. This allows you to work on the workpiece safely and quickly.
The clamping claw set has a maximum clamping height of 64 mm.
The individual clamping elements are neatly stored in the practical plastic case.
The individual components in this set are made of C235 steel and cast steel.
Assembly (see image "Assembly example")
The clamping arm (also known as a clamping claw) with a slotted hole is attached so that one end rests on the body to be clamped. The other end rests on a support, the step block. The threaded rod is attached as close as possible to the workpiece and fixed at the lower end to a plate or the machine table using a T-slot nut. A collar nut is fitted to the upper end of the stud bolt. This applies the clamping force by tightening it firmly. This means that the workpiece can no longer slip and work on the workpiece can be carried out safely and quickly.
The clamping claw set has a maximum clamping height of 64 mm.
The individual clamping elements are neatly stored in the practical wall holder.
This 10-piece clamping claw set with M6 thread for 8 mm T-slot width is suitable for secure and fast clamping of workpieces, tools and fixtures, especially on our dividing heads.
The set is suitable for the following dividing heads:
- Rotary indexing table Ø 80 mm horizontal / vertical (item no. 16200)
- Rotary indexing table Ø 80 mm swivelling horizontal / vertical (item no. 16201)
- Rotary table dividing head Ø 100 mm horizontal / vertical (item no. 16202)
- Rotary table dividing head Ø 100 mm swivelling horizontal / vertical (item no. 16203)
- Rotary indexing table Ø 105 mm swivelling horizontal / vertical (item no. 16205)
The clamping element with a slotted hole (also known as a clamping claw) is attached so that one end rests on the body to be clamped. The other end rests on a support, the step block. The threaded rod is attached as close as possible to the workpiece and fixed at the lower end to one of our rotary tables (item no. 16200, 16201, 16202, 16203 or 16205) using a T-slot nut. A collar nut is fitted to the upper end of the stud bolt. This applies the clamping force by tightening it firmly. Now the workpiece can no longer slip and you can carry out your work safely and quickly.
The clamping claw set can be used for workpieces with a maximum height of 20 mm.
Please note that the clamping claw set is not compatible with the VERTEX rotary tables!
This 10-piece clamping claw set with M6 thread is suitable for secure and fast clamping of workpieces, tools and fixtures.
Material properties
The individual components in this set are made from C45 heat-treated steel (material number 1.0503) and have undergone heat treatment. Among other things, this leads to an increase in tensile strength.
Manufacturer's hardness specifications for all components: 32 HRC
Assembly
The clamping element (step block) with a slotted hole is fastened so that one end rests on the body to be clamped and the other end rests on a step clamp. The stud bolt is attached as close as possible to the workpiece and fixed at the lower end to a plate or the machine table. A collar nut is fitted to the upper end of the stud bolt. This applies the clamping force by tightening it firmly so that the workpiece can no longer slip. This allows you to work safely and quickly on the workpiece.
The clamping claw set can be used for workpieces with a maximum height of 64 mm.
The individual components in this set are made from C45 heat-treated steel (material number 1.0503) and have undergone heat treatment. Among other things, this leads to an increase in tensile strength.
Assembly (see picture "Assembly example")
The clamping arm (also known as a clamping claw) with a slotted hole is fastened so that one end rests on the body to be clamped. The other end rests on a support, the step block. The threaded rod is attached as close as possible to the workpiece and mounted at the lower end on a plate or the machine table. This applies the clamping force by tightening it firmly. This prevents the workpiece from slipping. This allows you to carry out your work on the workpiece safely and quickly.
The clamping claw set has a maximum clamping height of 64 mm.
The individual clamping elements are neatly stored in the practical plastic case.
The individual components in this set are made of C235 steel and cast steel.
Assembly (see image "Assembly example")
The clamping arm (also known as a clamping claw) with a slotted hole is attached so that one end rests on the body to be clamped. The other end rests on a support, the step block. The threaded rod is attached as close as possible to the workpiece and fixed at the lower end to a plate or the machine table using a T-slot nut. A collar nut is fitted to the upper end of the stud bolt. This applies the clamping force by tightening it firmly. This means that the workpiece can no longer slip and work on the workpiece can be carried out safely and quickly.
The clamping claw set has a maximum clamping height of 64 mm.
The individual clamping elements are neatly stored in the practical wall holder.
10-piece clamping claw set for 10 mm T-slot width and M8 thread.
This set is used for quick clamping of workpieces, tools or fixtures.
Material properties
The individual components in this set are made from C45 heat-treated steel (material number 1.0503) and have undergone heat treatment. Among other things, this leads to an increase in tensile strength.manufacturer's hardness specifications for all components: 32 HRC
Assembly
The clamping element (step block) with a slotted hole is fastened so that one end rests on the body to be clamped and the other end rests on a step clamp. The stud bolt is attached as close as possible to the workpiece and fixed at the lower end to a plate or the machine table. A collar nut is fitted to the upper end of the stud bolt. This applies the clamping force by tightening it firmly so that the workpiece can no longer slip. This allows you to work safely and quickly on the workpiece.
The clamping claw set can be used for workpieces with a maximum height of 64 mm.
The individual components in this set are made of C235 steel and cast steel.
Assembly (see image "Assembly example")
The clamping arm (also known as a clamping claw) with a slotted hole is attached so that one end rests on the body to be clamped. The other end rests on a support, the step block. The threaded rod is attached as close as possible to the workpiece and fixed at the lower end to a plate or the machine table using a T-slot nut. A collar nut is fitted to the upper end of the stud bolt. This applies the clamping force by tightening it firmly. This means that the workpiece can no longer slip and work on the workpiece can be carried out safely and quickly.
The clamping claw set has a maximum clamping height of 64 mm.
The individual clamping elements are neatly stored in the practical wall holder.
10-piece clamping claw set for 12 mm T-slot width and M10 thread.
This set is used for quick clamping of workpieces, tools or fixtures.
Material properties
The individual components in this set are made from C45 heat-treated steel (material number 1.0503) and have undergone heat treatment. Among other things, this leads to an increase in tensile strength.manufacturer's hardness specifications for all components: 32 HRC
Assembly
The clamping element (step block) with a slotted hole is fastened so that one end rests on the body to be clamped and the other end rests on a step clamp. The stud bolt is attached as close as possible to the workpiece and fixed at the lower end to a plate or the machine table. A collar nut is fitted to the upper end of the stud bolt. This applies the clamping force by tightening it firmly so that the workpiece can no longer slip. This allows you to work safely and quickly on the workpiece.
The clamping claw set can be used for workpieces with a maximum height of 64 mm
The individual components in this set are made from C45 heat-treated steel (material number 1.0503) and have undergone heat treatment. Among other things, this leads to an increase in tensile strength.
Assembly (see picture "Assembly example")
The clamping arm (also known as a clamping claw) with a slotted hole is fastened so that one end rests on the body to be clamped. The other end rests on a support, the step block. The threaded rod is attached as close as possible to the workpiece and fixed at the lower end to a plate or the machine table using a T-slot nut. A collar nut is fitted to the upper end of the stud bolt. This applies the clamping force by tightening it firmly. This prevents the workpiece from slipping. This allows you to work on the workpiece safely and quickly.
The clamping claw set has a maximum clamping height of 70 mm.
The individual clamping elements are neatly stored in the practical plastic case.
The individual components in this set are made of C235 steel and cast steel.
Assembly (see picture "Assembly example")
The clamp with a slotted hole (also known as a clamping claw) is attached so that one end rests on the body to be clamped. The other end rests on a support, the step block. The threaded rod is attached as close as possible to the workpiece and fixed at the lower end to a plate or the machine table using a T-slot nut. A collar nut is fitted to the upper end of the stud bolt. This applies the clamping force by tightening it firmly. This means that the workpiece can no longer slip and work on the workpiece can be carried out safely and quickly.
The clamping claw set has a maximum clamping height of 70 mm.
The individual clamping elements are neatly stored in the practical wall holder.
10-piece clamping claw set for 14 mm T-slot width and M12 thread.
This set is used for quick clamping of workpieces, tools or fixtures.
Material properties
The individual components in this set are made from C45 heat-treated steel (material number 1.0503) and have undergone heat treatment. Among other things, this leads to an increase in tensile strength.manufacturer's hardness specifications for all components: 32 HRC
Assembly
The clamping element (step block) with a slotted hole is fastened so that one end rests on the body to be clamped and the other end rests on a step clamp. The stud bolt is attached as close as possible to the workpiece and fixed at the lower end to a plate or the machine table. A collar nut is fitted to the upper end of the stud bolt. This applies the clamping force by tightening it firmly so that the workpiece can no longer slip. This allows you to work safely and quickly on the workpiece.
The clamping claw set can be used for workpieces with a maximum height of 70 mm
€39.50*
Content: 1 pcs
€25.50*
Content: 1 pcs
€13.00*
Content: 1 Piece
€15.50*
Content: 1 pcs
€36.50*
Content: 1 pcs
€30.00*
Content: 1 pcs
€16.50*
Content: 1 pcs
€33.00*
Content: 1 pcs
€18.00*
Content: 1 pcs
€42.50*
Content: 1 pcs
€36.00*
Content: 1 pcs
€26.00*
Content: 1 pcs
2 - 10 of 25 reviews
6 December 2024 21:28
Excellent Clamping Set
This is a fantastic clamping set. The included box makes it easy to store and use. Order with confidence!
25 December 2023 16:37
Super Qualität
Super Qualität
7 November 2023 09:10
Gute Qualität :-)
1A :-)
3 October 2023 10:31
Günstiges Spannpratzen-Set
Übersichtlich im Koffer geordnet. Bin sehr zufrieden!
22 December 2022 09:09
Ist immer griffbereit,und alles übersichtlich verstaut.
Ist immer griffbereit,und alles übersichtlich verstaut.
20 November 2022 18:35
Gewinde etwas nachschneiden.
Man bekommt was man bezahlt. Die T-Nutmuttern waren mit einem stumpfen Werkzeug entgratet, ich musste alle Innengewinde nachschneiden, es war aber nur die Außerste Umdrehung zusammengedrückt. Die Stufenblöckchen sind nicht alle gleich hoch, wenn man die auf die Seite legt (wenn man die Idee haben sollte die als Unterlage versuchen zu wollen).
7 June 2022 13:40
flexibler kleiner Zauberkasten mit 1000 Möglichkeiten -
flexibler kleiner Zauberkasten mit 1000 Möglichkeiten - sehr zufrieden
15 April 2022 09:27
très bien
très bien
19 March 2022 08:45
Excellent quality and presentation. I would buy
Excellent quality and presentation. I would buy it again.
29 January 2022 00:00
Gut und preisgünstig
Ich hatte bereits das gleiche Spannpratzen-Set von PAULIMOT. Als mein Kollege das in meiner Werkstatt sah hat er mich gebeten, für Ihn das gleiche zu bestellen. Wiederum schnelle und einwandfreie Lieferung.