Stamping number set 36 pieces, character height: 4.0 mm

This punch number set can be used to punch the letters A to Z, the digits 0 to 9 and the & symbol into materials such as steel, copper, aluminium, brass, plastic, wood and many more. The punched numbers and letters reach a font height of 4 mm. The respective embossing is mirror-inverted as a relief at the end of the square pins. The embossing has been removed from the striking surfaces to prevent the material from splintering.

To achieve an even typeface, proceed as follows:

1. Place the desired letter / number on the material to be punched.
2. Now hit the punching pin with a hammer to punch the desired letter / number.
3. You can remove the material pressed away by the embossing - depending on the material being punched - using emery paper or sandpaper, for example.
4. The depth, width and height of the embossing depends on the impact force used.

Please note that the number 9 is not included in the set. To punch the number 9, please use the punch with the number "6" and rotate it by 180°.

With this numbering set, you can stamp the letters A to Z, the numbers 0 to 9 and the & symbol into materials such as steel, copper, aluminium, brass, plastic, wood and many more. The stamped numbers and letters have a height of 3 mm. The respective embossing appears at the end of the square pins as a mirror-inverted relief. The embossing is chamfered at the striking surfaces, so that chipping of the material is prevented.

To achieve a uniform typeface, proceed as follows:

1. Position the desired letter / the desired number on the material to be stamped.
2. Now strike the embossing pin selectively with a hammer in order to stamp the desired letter / the desired number.
3. You can remove the material displaced by the embossing - depending on the stamped material - e.g. with emery paper or sandpaper.
4. The depth, width and height of the embossing depends on the impact force used.

Please note that the set does not include the number 9. To stamp the number 9, please use the stamp with the number "6" and rotate it by 180°.

This punch number set can be used to punch the letters A to Z, the digits 0 to 9 and the & symbol into materials such as steel, copper, aluminium, brass, plastic, wood and many more. The punched numbers and letters reach a font height of 4.5 mm. The respective embossing is mirror-inverted as a relief at the end of the square pins. The embossing has been removed from the striking surfaces to prevent the material from splintering.

To achieve an even typeface, proceed as follows:

1. Place the desired letter / number on the material to be punched.
2. Now hit the punching pin with a hammer to punch the desired letter / number.
3. You can remove the material pressed away by the embossing - depending on the material being punched - using emery paper or sandpaper, for example.
4. The depth, width and height of the embossing depends on the impact force used.

Please note that the number 9 is not included in the set. To punch the number 9, please use the punch with the number "6" and rotate it by 180°.

This punch number set can be used to punch the letters A to Z, the digits 0 to 9 and the & symbol into materials such as steel, copper, aluminium, brass, plastic, wood and many more. The punched numbers and letters reach a font height of 8 mm. The respective embossing is mirror-inverted as a relief at the end of the square pins. The embossing has been removed from the striking surfaces to prevent the material from splintering.

To achieve an even typeface, proceed as follows:

1. Place the desired letter / number on the material to be punched.
2. Now hit the punching pin with a hammer to punch the desired letter / number.
3. You can remove the material pressed away by the embossing - depending on the material being punched - using emery paper or sandpaper, for example.
4. The depth, width and height of the embossing depends on the impact force used.

Please note that the number 9 is not included in the set. To punch the number 9, please use the punch with the number "6" and rotate it by 180°.