Tailstock for dividing heads, height-adjustable from 75 to 90 mm
€49.50*
% €55.50* (10.81% saved)Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
The tailstock is used during milling to machine workpieces "between the centres" or to support or horizontally align workpieces that are slightly further from the dividing attachment.
Technical data
| Base dimensions [mm]: | 117 x 84 |
|---|---|
| Centre height [mm]: | 75 - 90 |
| Centre Ø [mm]: | 20 |
| Material lace: | C45E steel |
| Net weight [kg]: | 2,7 |
| Tip hardness [HRC]: | 40 - 45 |
| Total height [mm]: | 90 |
Height adjustable from 75 to 90 mm
Adjustability of the centre point by 30 mm
For use when milling longer shafts
Precise centring of the workpiece in a horizontal position
Description of the
With its height-adjustable centre, this tailstock is suitable for dividing heads with a rotary table centre between 75 and 90 mm in the vertical position.
To achieve horizontal alignment of the workpiece, it is clamped between the dividing attachment and the tailstock. The tailstock centre is fixed at the set height by a clamping screw, and the horizontal position of the centre can also be secured by clamping.
Lateral adjustment of the centre point is made possible by a knurled rotary knob. The horizontal travel of the centre is 30 mm.
Scope of delivery
- 1 x tailstock with height-adjustable centre from 75 to 90 mm
More about the brand and products from
With its height-adjustable centre, this tailstock is suitable for dividing heads with a rotary table centre between 75 and 90 mm in the vertical position.
To achieve horizontal alignment of the workpiece, it is clamped between the dividing attachment and the tailstock. The tailstock centre is fixed at the set height by a clamping screw, and the horizontal position of the centre can also be secured by clamping.
Lateral adjustment of the centre point is made possible by a knurled rotary knob. The horizontal travel of the centre is 30 mm.
Thanks to its height-adjustable centre, this tailstock is suitable for dividing heads with a rotary table centre between 75 and 105 mm in the vertical position.
To achieve horizontal alignment of the workpiece, it is clamped between the dividing attachment and the tailstock. The tailstock centre is fixed at the set height by a clamping screw, and the horizontal position of the centre can also be secured by clamping.
Lateral adjustment of the centre point is made possible by a knurled rotary knob. The horizontal travel of the centre is 27.5 mm.
This tailstock, ground on all sides, is suitable for the SIEG precision dividing attachment Article No. 16050, i.e. the centre height of this tailstock corresponds to the height of the support up to the rotary axis of the rotary table (for horizontal use). Both the centre point guide and the centre point itself can be adjusted laterally using knurled adjustment wheels. The set position of the centre point guide can be fixed using a hexagon socket screw. The centre point is locked in place using a clamping screw on the side. The base has two slotted holes for fastening to the machine table. The centre point guide can be lubricated via an oiler.
With its height-adjustable centre, this tailstock is suitable for dividing heads with a rotary table centre between 45 and 80 mm in the vertical position.
To achieve horizontal alignment of the workpiece, it is clamped between the dividing attachment and the tailstock. The tailstock centre is fixed at the set height by a clamping screw, and the horizontal position of the centre can also be secured by clamping.
Lateral adjustment of the centre point is made possible by a knurled rotary knob. The horizontal travel of the centre is 27 mm.
€49.50*
Content: 1 Piece
€105.00*
Content: 1 pcs
€100.00*
Content: 1 pcs
€57.00*
Content: 1 pcs
14 March 2023 18:44
Super Reitstock
Super Reitstock
7 December 2021 00:00
Einfacher Reitstock für die "teureren Teilapparate" - Mit Parallelunterlagen unter kleineren Apparaten auch dort verwendbar!
Ich habe anfänglich Parallelunterlagen unter meinen kleinen Teilapparat gelegt, dann konnte ich den Reitstock auch mit diesen nicht vorgesehenen Teilen verwenden. Habe mir später eine neue Zwischenlage für meine BF16V gefräst, die etwas über den Arbeitsbereich vom Kreuztisch hinausragt. Damit habe ich auch mit dem Teilapparat mehr Bearbeitungsraum. Was anfänglich schlecht aussieht, kann plötzlich auch Vorteilhaft sein!
25 September 2020 00:00
Tolles Teil
Tolles Teil , wegen der Höhenverstellung, gut zu gebrauchen Günstiger Preis, gute Qualität.
13 September 2020 00:00
Macht was es soll.
Nichts zu beanstanden und sehr schnell geliefert.
6 July 2020 00:00
Einwandfrei
Für den gedachten Einsatzzweck sehr gut einsetzbar.
6 January 2020 00:00
Gerne wieder
Der Reitstock wurde schnell geliefert. Preis-Leistungsverhältnis passt. Die Verarbeitung ist O.K. Da gibt es nichts auszusetzen.
13 December 2019 00:00
Fräsen
Top Ware, gerne wieder