Precision high-speed centre punch tip, MK4
€158.00*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
Less than 10 pieces available (online and in specialist shops)
Intended use
A centre punch (often also called a centre point or rolling centre punch) is one of the most important tools when working with a lathe. It is used to secure the tailstock so that long, thin and heavy workpieces can be machined safely and accurately. Centre punches are mainly used at higher speeds.
Technical data
| Concentricity (max.) [mm]: | 0,003 |
|---|---|
| Morse taper recording: | MK4 |
| Point angle [°]: | 60 |
| Speed (max.) [rpm]: | 6.000 |
| Tool material: | Rolling bearing steel |
| Total length [mm]: | 218 |
| Ø bearing housing [mm]: | 63,5 |
| Ø tip [mm]: | 28 |
One of the most important accessories for a lathe
For securing long, thin and heavy workpieces
Concentricity: max. 0.003 mm
Steel tip, hardened and ground
Further sizes (MK0 - MK4) in our range
Description of the
The centre point has double bearings and therefore achieves a very high concentricity of max. 0.003 mm. It can be used up to a speed of 6,000 rpm. The steel tip is hardened and ground, which increases the load capacity and service life of this item. The point angle of this centre point is 60°, as is usual for centre points.
In contrast to fixed centre points, the tip of live centre points rotates with the workpiece, which prevents friction and enables higher speeds.
We supply live centre points in sizes MK0 to MK4.
Scope of delivery
- 1 x precision high-speed centre punch tip, MK4
More about the brand and products from
Further information on our professional line
The centre point has double bearings and therefore achieves a very high concentricity of max. 0.003 mm. It can be used up to a speed of 6,000 rpm. The steel tip is hardened and ground, which increases the load capacity and service life of this item. The point angle of this centre point is 60°, as is usual for centre points.
In contrast to fixed centre points, the tip of live centre points rotates with the workpiece, which prevents friction and enables higher speeds.
We supply live centre points in sizes MK0 to MK4.
Adjustable centre point for taper turning for MK2 + MK3
this eliminates the need to realign the tailstock after cone or taper turning
- total length: 153 mm
- max. adjustment range: +/- 7 mm
- Ø centre: 24 mm
- Centre angle: 60°
The centre point has double bearings and therefore achieves a high concentricity of max. 0.007 mm. It can be used up to a speed of 1,500 rpm. The steel tip is hardened and ground, which increases the load capacity and service life of this item. The point angle of this centre point is 60°, as is usual for centre points.
In contrast to fixed centre points, the tip of live centre points rotates with the workpiece, which prevents friction and enables higher speeds.
We supply live centre points in sizes MK0 to MK4.
The centre point has double bearings and therefore achieves a high concentricity of max. 0.007 mm. It can be used up to a speed of 1500 rpm. The steel tip is hardened and ground, which increases the load capacity and service life of this item. The point angle of this centre point is 60°, as is usual for centre points.
In contrast to fixed centre points, the tip of live centre points rotates with the workpiece, which prevents friction and enables higher speeds.
We supply live centre points in sizes MK0 to MK4.
The centre point has double bearings and therefore achieves a high concentricity of max. 0.015 mm. It can be used up to a speed of 2,800 rpm. The steel tip is hardened and ground, which increases the load capacity and service life of this item. The point angle of this centre point is 60°, as is usual for centre points.
In contrast to fixed centre points, the tip of live centre points rotates with the workpiece, which prevents friction and enables higher speeds.
We supply live centre points in sizes MK0 to MK4.
The centre point has double bearings and therefore achieves a high concentricity of max. 0.007 mm. It can be used up to a speed of 1,500 rpm. The steel tip is hardened and ground, which increases the load capacity and service life of this item. The point angle of this centre point is 60°, as is usual for centre points.
In contrast to fixed centre points, the tip of live centre points rotates with the workpiece, which prevents friction and enables higher speeds.
We supply live centre points in sizes MK0 to MK4.
The centre point has double bearings and therefore achieves a high concentricity of max. 0.015 mm. It can be used up to a speed of 2,800 rpm. The steel tip is hardened and ground, which increases the load capacity and service life of this item. The point angle of this centre point is 60°, as is usual for centre points.
In contrast to fixed centre points, the tip of live centre points rotates with the workpiece, which prevents friction and enables higher speeds.
We supply live centre points in sizes MK0 to MK4.
The centre point has double bearings and therefore achieves a high concentricity of max. 0.015 mm. It can be used up to a speed of 2,800 rpm. The steel tip is hardened and ground, which increases the load capacity and service life of this item. The point angle of this centre point is 60°, as is usual for centre points.
In contrast to fixed centre points, the tip of live centre points rotates with the workpiece, which prevents friction and enables higher speeds.
We supply live centre points in sizes MK0 to MK4.
The centre point has double bearings and therefore achieves a high concentricity of max. 0.015 mm. It can be used up to a speed of 2,800 rpm. The steel tip is hardened and ground, which increases the load capacity and service life of this item. The point angle of this centre point is 60°, as is usual for centre points.
In contrast to fixed centre points, the tip of live centre points rotates with the workpiece, which prevents friction and enables higher speeds.
We supply live centre points in sizes MK0 to MK4.
The centre point has double bearings and therefore achieves a very high concentricity of max. 0.003 mm. It can be used up to a speed of 8,000 rpm. The steel tip is hardened and ground, which increases the load capacity and service life of this item. The point angle of this centre point is 60°, as is usual for centre points.
In contrast to fixed centre points, the tip of live centre points rotates with the workpiece, which prevents friction and enables higher speeds.
We supply live centre points in sizes MK0 to MK4.
The centre point has double bearings and therefore achieves a very high concentricity of max. 0.003 mm. It can be used up to a speed of 8,000 rpm. The steel tip is hardened and ground, which increases the load capacity and service life of this item. The point angle of this centre point is 60°, as is usual for centre points.
In contrast to fixed centre points, the tip of live centre points rotates with the workpiece, which prevents friction and enables higher speeds.
We supply live centre points in sizes MK0 to MK4.
The steel tip is hardened and ground, which increases the resilience and service life of this item. The point angle of this centre point is 60°, as is usual for centre points.
In contrast to fixed centre points, the tip of live centre points rotates with the workpiece, which prevents friction and enables higher speeds.
We supply live centre points in sizes MK0 to MK4.
The steel tip is hardened and ground, which increases the resilience and service life of this item. The point angle of this centre point is 60°, as is usual for centre points.
In contrast to fixed centre points, the tip of live centre points rotates with the workpiece, which prevents friction and enables higher speeds.
We supply live centre points in sizes MK0 to MK4.
€158.00*
Content: 1 Piece
€56.50*
Content: 1 Piece
€25.50*
Content: 1 Piece
€33.00*
Content: 1 Piece
€23.00*
Content: 1 pcs
€22.50*
Content: 1 Piece
€26.50*
Content: 1 pcs
€32.00*
Content: 1 pcs
€20.00*
Content: 1 pcs
€127.00*
Content: 1 Piece
€117.00*
Content: 1 Piece
€15.00*
Content: 1 pcs
€15.00*
Content: 1 pcs