Auger bit set, 8-piece Ø 10 - 24 mm, length 460 mm, shape Lewis
€30.50*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
Auger bits are particularly suitable for deep-hole drilling in softwood and European hardwood, such as beech and oak. They are not suitable for tropical hardwoods.
Drill bits up to a diameter of 20 mm are used in hand drills or powerful cordless screwdrivers.
Technical data
| Nominal diameter [mm]: | 10, 12, 14, 16, 18, 20, 22, 24 |
|---|---|
| Total length [mm]: | 460 |
| Material: | Carbon tool steel |
Made from hardened carbon tool steel
Precise centring possible thanks to centring tip
Retractable thread on centre point, therefore little pressure required
Very good chip removal
Clean hole edge thanks to the pre-cutter
Description of the
Our auger bits are made from high-quality, hardened carbon tool steel. This choice of material enables high cutting performance and resilience. The auger bit is also equipped with a centring tip, which enables very precise centring of the drill bit. A retractable thread on the centre point pulls the drill bit into the wood so that less pressure needs to be exerted when drilling.
While a clean and tear-free hole edge can also be produced at low speeds thanks to the pre-cutter, the auger bit also impresses with very good chip removal.
The auger bit is suitable for drilling through holes in beams and rafters as well as for making deep blind holes.
A taper in the direction of the clamping shank of 1:50 to 1:100 is intended to prevent jamming in the hole.
The set is supplied in a practical wooden box.
Scope of delivery
- 1 x auger bit Ø 10 mm, length 460 mm, shape Lewis
- 1 x auger bit Ø 12 mm, length 460 mm, shape Lewis
- 1 x auger bit Ø 14 mm, length 460 mm, Lewis shape
- 1 x auger bit Ø 16 mm, length 460 mm, shape Lewis
- 1 x auger bit Ø 18 mm, length 460 mm, shape Lewis
- 1 x auger bit Ø 20 mm, length 460 mm, shape Lewis
- 1 x auger bit Ø 22 mm, length 460 mm, shape Lewis
- 1 x auger bit Ø 24 mm, length 460 mm, shape Lewis
More about the brand and products from
Our auger bits are made from high-quality, hardened carbon tool steel. This choice of material enables high cutting performance and resilience. The auger bit is also equipped with a centring tip, which enables very precise centring of the drill bit. A retractable thread on the centre point pulls the drill bit into the wood so that less pressure needs to be exerted when drilling.
While a clean and tear-free hole edge can also be produced at low speeds thanks to the pre-cutter, the auger bit also impresses with very good chip removal.
The auger bit is suitable for drilling through holes in beams and rafters as well as for making deep blind holes.
A taper in the direction of the clamping shank of 1:50 to 1:100 is intended to prevent jamming in the hole.
The set is supplied in a practical wooden box.
The auger bits in this set are made from high-quality, hardened carbon tool steel. This choice of material enables a high cutting performance and load capacity. The auger bit is also equipped with a centring tip, which enables very precise centring of the bit. A retractable thread on the centre point pulls the drill bit into the wood so that less pressure needs to be exerted when drilling.
While a clean and tear-free hole edge can also be produced at low speeds thanks to the pre-cutter, the auger bit also impresses with very good chip removal.
The auger bit is suitable for drilling through holes in beams and rafters as well as for making deep blind holes.
A taper in the direction of the clamping shank of 1:50 to 1:100 is intended to prevent jamming in the hole.
The set is supplied in a practical wooden box.
The auger bits in this set are made from high-quality, hardened carbon tool steel. This choice of material enables a high cutting performance and load capacity. The auger bit is also equipped with a centring tip, which enables very precise centring of the bit. A retractable thread on the centre point pulls the drill bit into the wood so that less pressure needs to be exerted when drilling.
While a clean and tear-free hole edge can also be produced at low speeds thanks to the pre-cutter, the auger bit also impresses with very good chip removal.
The auger bit is suitable for drilling through holes in beams and rafters as well as for making deep blind holes.
A taper in the direction of the clamping shank of 1:50 to 1:100 is intended to prevent jamming in the hole.
The set is supplied in a practical wooden box.
Our auger bits are made from high-quality, hardened carbon tool steel. This choice of material enables high cutting performance and resilience. The auger bit is also equipped with a centring tip, which enables very precise centring of the drill bit. A retractable thread on the centre point pulls the drill bit into the wood so that less pressure needs to be exerted when drilling.
While a clean and tear-free hole edge can also be produced at low speeds thanks to the pre-cutter, the auger bit also impresses with very good chip removal.
The auger bit is suitable for drilling through holes in beams and rafters as well as for making deep blind holes.
A taper in the direction of the clamping shank of 1:50 to 1:100 is intended to prevent jamming in the hole.
The set is supplied in a practical wooden box.
€30.50*
Content: 1 pcs
€37.50*
Content: 1 pcs
€15.50*
Content: 1 pcs
€17.50*
Content: 1 pcs
15 July 2024 17:40
Einfache Bestellung schnelle Lieferung. Ware wie vorgestellt.
Einfache Bestellung schnelle Lieferung. Ware wie vorgestellt. Gern wieder.
24 May 2024 19:50
Top
Alles sehr gut.
8 March 2023 12:14
Gute Verarbeitung. Die Bohrer sind scharf!
Gute Verarbeitung. Die Bohrer sind scharf!
25 January 2023 11:00
Schnelle Lieferung, Bohrer von guter Qualität. Leider
Schnelle Lieferung, Bohrer von guter Qualität. Leider schlecht verpackt, Holzkasten deshalb zerbrochen geliefert.
21 September 2022 08:44
Alles bestens, gut verarbeitet.
Alles bestens, gut verarbeitet.
12 July 2022 08:33
Einfach top! Keine Verschleißerscheinungen nach den ersten
Einfach top! Keine Verschleißerscheinungen nach den ersten Löchern
11 January 2022 00:00
Super Bohrer
Habe diese Bohrer zum Ausbohren von Blei an einem Tauchgerät (JJ CCR) verwendet. Durch das Bohren mit 3 verschiedenen Durchmessern ging es Recht zügig und es gab keine Sichtbaren Verschleiß Erscheinungen an den Bohrern. Durch die Holzkiste ist alles Ordentlich verstaut und ist besser geschützt als bei solchen Kunstofftütchchen. Klare Kaufempfehlung
17 January 2021 00:00
Artikel und Preis Leistungsverhältnis ist ok, Sortiment erweiterungsfähig
Der bei Ihnen gekaufte Schlangenbohrersatz ist ok. Die Lieferung erfolgte pünktlich. Ihr Angebot ist erweiterungsfähig. Zapfenbohrersatz 15 mm bis 35 mm nicht im Angebot. Bei bedarf würde ich erneut bei Ihnen einkaufen.
5 July 2020 00:00
My purchases
Totally satisfied! I will buy definitely again from this seller. Very fast delivery.
15 April 2020 00:00
Gewohnte Qualität
Nichts zu beanstanden