Precision quick-action drill chuck 1 - 16 mm MK3
€60.00*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
Drill chucks are used to clamp tools with a cylindrical shank, such as drills, countersinks, reamers, etc. Drill chucks are used in machine tools such as lathes, milling machines or drilling machines. Depending on the type of machine, a drill chuck with a suitable holder is required. A general distinction is made between drill chucks in which the tools are clamped with a spanner and drill chucks in which the tools can be clamped without a spanner, so-called quick-action drill chucks.
Technical data
| Clamping range [mm]: | 1 - 16 |
|---|---|
| Concentricity deviation max. [mm]: | 0,05 |
| Cone mandrel: | MK3 |
| Ø drill max. [mm]: | 16 |
Fast, secure clamping and releasing
No clamping spanner required
Suitable for use on lathes and drills
For clamping tools with a cylindrical shank
Maximum concentricity deviation: 0.05 mm
Description of the
With this precision quick-action drill chuck, the taper arbor and the drill bit holder consist of one part, i.e. the taper arbor cannot be separated from the drill chuck. In contrast to drill chucks with an inserted taper arbor, this design enables a higher concentricity to be achieved. The taper arbor has a drive-out tab and is therefore suitable for use both in drilling machines and in the tailstock of lathes. The clamping range of this chuck is 1 to 16 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
Scope of delivery
- 1 x Precision quick-action drill chuck 1-16 mm MK3
More about the brand and products from
Further information on our professional line
With this precision quick-action drill chuck, the taper arbor and the drill bit holder consist of one part, i.e. the taper arbor cannot be separated from the drill chuck. In contrast to drill chucks with an inserted taper arbor, this design enables a higher concentricity to be achieved. The taper arbor has a drive-out tab and is therefore suitable for use both in drilling machines and in the tailstock of lathes. The clamping range of this chuck is 1 to 16 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
This quick-action drill chuck is supplied with a tapered arbour. The taper arbor and drill chuck are connected to each other via a positive-locking B16 cone, i.e. the taper arbor can be separated from the drill chuck. The taper arbor has a drive-out tab and is therefore suitable for use both in drilling machines and in the tailstock of lathes. The clamping range of this chuck is 1 to 13 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
This quick-action drill chuck is supplied with a tapered arbour. The taper arbor and drill chuck are connected to each other via a positive-locking B18 cone, i.e. the taper arbor can be separated from the drill chuck. The taper arbor has a drive-out tab and is therefore suitable for use both in drilling machines and in the tailstock of lathes. The clamping range of this chuck is 1 to 16 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
This quick-release drill chuck has a locking mechanism that prevents the drill chuck from loosening during anti-clockwise rotation. As a result, unlike conventional quick-release drill chucks, this drill chuck is suitable for clockwise and anti-clockwise rotation. The chuck is locked and unlocked by turning the red ring to "LOCK" or "UNLOCK". The drill chuck is supplied with a tapered arbour. The taper arbor and drill chuck are connected to each other via a form-fit B16 cone, i.e. the taper arbor can be separated from the drill chuck. The taper arbor has a drive-out tab and is therefore suitable for use both in drilling machines and in the tailstock of lathes. The clamping range of this chuck is 1 to 13 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
This quick-release drill chuck has a locking mechanism that prevents the drill chuck from loosening during anti-clockwise rotation. As a result, unlike conventional quick-release drill chucks, this drill chuck is suitable for clockwise and anti-clockwise rotation. The chuck is locked and unlocked by turning the red ring to "LOCK" or "UNLOCK". The drill chuck is supplied with a tapered arbour. The taper arbor and drill chuck are connected to each other via a form-fit B18 cone, i.e. the taper arbor can be separated from the drill chuck. The taper arbor has a drive-out tab and is therefore suitable for use both in drilling machines and in the tailstock of lathes. The clamping range of this chuck is 1 to 16 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
€60.00*
Content: 1 Piece
€25.00*
Content: 1 pcs
€27.50*
Content: 1 pcs
€29.50*
Content: 1 pcs
€33.50*
Content: 1 pcs
3 March 2024 14:03
sehr zu empfehlen
sehr gute Qualität
21 February 2024 18:02
Konusschachft zu lang, 5 mm gekürzt, Skala
Konusschachft zu lang, 5 mm gekürzt, Skala an Reitstock jetzt bei 0 mm
12 December 2023 18:56
Wie Beschrieben
Wie Beschrieben
4 February 2023 15:14
Top
Top
27 January 2023 10:01
Schnelle Lieferung
Gutes Teil
11 January 2023 08:21
jk
good
27 December 2022 16:25
Top Bohrfutter
Gewaltiges Bohrfutter bis 16 mm, top Qualität und guter Preis. Benötige es für 14 -16 mm Reibahlen mit zylindrischen Schaft. Bohren mit 16mm doch eher mit Konus.
17 November 2022 15:32
Alles bestens
Alles bestens
16 November 2022 08:25
Guter Service, schnelle Lieferung, Konus sitzt gut,
Guter Service, schnelle Lieferung, Konus sitzt gut, Spannbacken zentrisch, guter Rundlaug
11 October 2022 14:30
Empfehlenswert
Sehr gute Qualität zum bezahlbaren Preis