Rotating pull-down machine vice, 129 mm
€117.00*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
Like classic drill press vices, pull-down vices serve as a precise clamping device for machine tools. The most important feature of pull-down vices is the significantly higher clamping strength and greater precision due to the pull-down system.
Technical data
| Baking material: | C45E hardened steel, 45 - 50 HRC |
|---|---|
| Base body material: | C45E steel |
| Jaw height [mm]: | 40 |
| Jaw width [mm]: | 129 |
| Span (max.) [mm]: | 150 |
| Total height [mm]: | 145 |
Solid design
High clamping force
360° rotatable
Made from C45E steel
The pull-down system prevents the workpiece from standing up
Description of the
This rotating machine vice is made of C45E steel and is particularly characterised by its pull-down system. A guide slide runs under the movable clamping jaw, which moves the clamping jaw forwards and pulls it downwards at the same time. This solves the problem of tilting and workpieces remain securely clamped even under high force.
The vice can be rotated and is equipped with an angle scale, making it easy and convenient to carry out angle milling. Using the guide blocks included in the scope of delivery, the vice can be quickly and easily aligned parallel to the grooves in the worktable.
Scope of delivery
- 1 x Pull-down vice, rotatable, 129 mm
- 1 x detachable articulated crank handle
- 2 x M12 x 45 mm hammerhead screw (for 14 mm T-slots)
- 2 x nut M12
- 2 x M12 washers
- 2 x guide block 20 x 14 x 9 mm
- 2 x screw M6 x 12 mm for guide block
More about the brand and products from
This rotating machine vice is made of C45E steel and is particularly characterised by its pull-down system. A guide slide runs under the movable clamping jaw, which moves the clamping jaw forwards and pulls it downwards at the same time. This solves the problem of tilting and workpieces remain securely clamped even under high force.
The vice can be rotated and is equipped with an angle scale, making it easy and convenient to carry out angle milling. Using the guide blocks included in the scope of delivery, the vice can be quickly and easily aligned parallel to the grooves in the worktable.
Pull-down vice
Jaw width: 26 mm
Jaw height: 6.5 mm
Clamping range max.: 23 mm
Total height: 30 mm
Pull-down vice
Jaw width: 38 mm
Jaw height: 20 mm
Clamping range max.: 44 mm
Total height: 45 mm
incl. hexagon socket spanner
Pull-down vice
Jaw width: 63 mm
Jaw height: 32 mm
Clamping range max.: 85 mm
Total height: 63 mm
This two-part, very solid pull-down vice is made of nodular cast iron (cast iron with spheroidal graphite). Spheroidal graphite cast iron is a type of cast iron that has mechanical properties similar to steel due to the carbon contained in its spherical shape.
The replaceable jaws made of C45E steel are hardened and ground. The grooves milled into the jaws increase the holding force, making it more difficult for the workpiece to slip out. This two-part vice can be used to clamp both larger workpieces and workpieces whose clamping surfaces are not parallel to each other on the machine table.
Due to the design of this type of pull-down vice, the forces exerted when clamping the workpiece act very strongly in the direction of the machine table, preventing the workpiece from standing up during milling. The solid design ensures that the workpiece is clamped securely and quickly. The vice is fastened with clamping elements such as sliding blocks with threaded rods and collar nuts.
This rotating machine vice is made of C45E steel and is particularly characterised by its pull-down system. A guide carriage runs under the movable clamping jaw, which moves the clamping jaw forwards and pulls it downwards at the same time. This solves the problem of tilting and workpieces remain securely clamped even under high force.
The vice can be rotated and is equipped with an angle scale, making it easy and convenient to carry out angle milling.
Using the guide blocks included in the scope of delivery, the vice can be quickly and easily aligned parallel to the grooves in the worktable.
This two-piece, very solid pull-down vice is made of nodular cast iron (cast iron with spheroidal graphite). Spheroidal graphite cast iron is a type of cast iron which has mechanical properties similar to steel due to the carbon contained in its spherical shape. The replaceable jaws made of C45E steel are hardened and ground. The grooves milled into the jaws increase the holding force, making it more difficult for the workpiece to slip out. This two-part vice can be used to clamp both larger workpieces and workpieces whose clamping surfaces are not parallel to each other on the machine table. Due to the design of this type of pull-down vice, the forces exerted when clamping the workpiece act very strongly in the direction of the machine table, preventing the workpiece from standing up during milling. The solid design ensures that the workpiece is clamped securely and quickly. The vice is fastened with clamping elements such as sliding blocks with threaded rods and collar nuts.
Pull-down vice
Jaw width: 88 mm
Jaw height: 40 mm
Clamping range max.: 117 mm
Total height: 85 mm
This rotating machine vice is made of C45E steel and is particularly characterised by its pull-down system. A guide carriage runs under the movable clamping jaw, which moves the clamping jaw forwards and pulls it downwards at the same time. This solves the problem of tilting and workpieces remain securely clamped even under high force.
The vice can be rotated and is equipped with an angle scale, making it easy and convenient to carry out angle milling.
Using the guide blocks included in the scope of delivery, the vice can be quickly and easily aligned parallel to the grooves in the worktable.
Pull-down vice
Jaw width: 100 mm
Jaw height: 45 mm
Clamping range max.: 125 mm
Total height: 90 mm
€117.00*
Content: 1 pcs
€35.50*
Content: 1 pcs
€47.00*
Content: 1 pcs
€58.50*
Content: 1 pcs
€160.00*
Content: 1 Piece
€76.00*
Content: 1 Piece
€239.00*
Content: 1 pcs
€118.00*
Content: 1 pcs
€98.00*
Content: 1 Piece
€148.00*
Content: 1 pcs
19 January 2025 10:01
Preis-Leistung ist super
Preis-Leistung ist super
25 December 2024 08:12
10 von 10 Top
Einfach Top, mehr geht nicht
15 October 2023 20:24
Gut und günstig!
Gut und günstig!
24 January 2023 09:57
Bin total zufrieden und Qualität ist auch
Bin total zufrieden und Qualität ist auch Top benutze das zur Zeit ohne Drehscheibe.
2 August 2022 20:10
Sehr zufrieden
Der Schraubstock is riesig und sehr schoen verarbeitet. Alles laeuft wie es soll. Abmessung Protokol mitgeliefert. Die tolleranzen sind ganz ausreichend fuer mich. Gut verpackt. Leider habe ich fuer meine neue Fraesmaschiene SX2.7L dieser, viel zu grosser Stueck gekauft. Paulimot hat die Webseite gut organisiert weil es nur die 100mm und kleinere Schraubstocke emfehlt.
30 July 2021 00:00
Maschinenschraubstock
Kann jeden diesen schraubstock empfehlen und muss echt sagen ich bin so extrem überrascht von der Qualität und der Verarbeitung um so einen niedrigen Preis habe mal einen teuren in der gleichen Ausführung gehabt und bin mit diesem 100% mehr zufrieden wie mit dem teuren und eines muss ich echt erwähnen das der service von paulimot ein vorzeige Unternehmen ist habe ein mal eine Reklamation gehabt und hhabe noch nie so eine reibungslose Service gehabt wie von dieser Firma kann jeden nur empfehlen das ihr da einkauft
12 June 2021 00:00
Top
Sehr massiv und passgenau.
4 May 2021 00:00
Schraubstock
Spitzen Werkzeug super Preisleistung, problemloser Umtausch wegen Fehlkauf ( Größe)
25 April 2021 00:00
hochwertige Verarbeitung, exakt planparallel, gute Klemmung
sehr gutes Preis-Leistungsverhältnis, zu diesem Preis gibts wohl kaum einen besseren! Einzig bei der Gradmarkierung am Drehboden wurde der Markierungsstrich vergessen einzuschleifen!
23 March 2021 00:00
toller Schraubstock
Super Teil, mit guter Verabeitung und guten Toleranzen für den anspruchsvollen Hobbybasteler!