Lathe PM2500 with 400 volt motor and measuring system
€2,299.00*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
Less than 10 pieces available (online and in specialist shops)
Intended use
The PM2500 is a metal lathe for the high-end hobby sector. Due to its versatile application possibilities, this lathe is used in model making, in individual and small series production, in prototype construction and in repair and training workshops. The lathe is designed for machining steel, cast iron, all non-ferrous metals, aluminium, brass, etc., but can also be used for machining plastics or similar non-hazardous or dust-generating materials.
Technical data
| Bed width [mm]: | 135 |
|---|---|
| Centre distance [mm]: | 450 |
| Centre height [mm]: | 125 |
| Circulation Ø over cross slide [mm]: | 130 |
| Clamping range inner jaws [mm]: | 2,5 - 125 |
| Clamping range outer jaws [mm]: | 38 - 110 |
| Concentricity of lathe chuck [mm]: | max. 0.040 |
| Frequency [Hz]: | 50 |
| Gross weight [kg]: | 180 |
| Lateral adjustability of the tailstock [mm]: | ± 8 |
| Lathe chuck diameter [mm]: | 125 |
| Lead of top slide spindle [mm]: | 2 |
| Lead screw pitch [mm]: | 3 |
| Longitudinal feed [mm]: | 0,05 - 0,1 |
| Machine dimensions (L x W x H) [mm]: | 1,200 x 570 x 580 |
| Max. torsion bar height [mm]: | 12 |
| Motor power P1 [W]: | 1.380 |
| Motor power P2 [W]: | 750 |
| Net weight [kg]: | 150 |
| Number of longitudinal feeds: | 2 |
| Number of thread pitches (inch): | 20 |
| Number of thread pitches (metric): | 20 |
| Packaging dimensions (L x W x H) [mm]: | 1,260 x 570 x 570 |
| Pitch face slide spindle [mm]: | 2 |
| Quadruple steel holder Mounting height [mm]: | 20 |
| Rotation Ø over machine bed [mm]: | 250 |
| Scale division on the bed slide handwheel [mm] / [in]: | 0,5 / 0,02 |
| Scale division on the cross slide handwheel [mm] / [in]: | 0,1 / 0,004 |
| Scale division on top slide handwheel [mm] / [in]: | 0,05 / 0,002 |
| Scale graduation on tailstock handwheel [mm] / [in]: | 0,025 / 0,001 |
| Spindle bore [mm]: | 27 |
| Spindle cone: | MK4 |
| Spindle holder: | cylindrical DIN 6350 |
| Spindle speed [rpm].: | 105 / 200 / 350 / 600 / 1.000 / 1.600 |
| Steps Spindle speed: | 6 |
| Tailstock cone: | MK2 |
| Tailstock quill stroke [mm]: | 60 |
| Thread pitch [Gg/"]: | 8 - 56/1 |
| Thread pitch [mm]: | 0,2 - 3,5 |
| Tool holder: | 4-fold |
| Top slide rotatable [°]: | ± 45 |
| Travelling distance of the cross slide [mm]: | 110 |
| Travel of the bed slide [mm]: | 415 |
| Travel of the top slide [mm]: | 75 |
| Voltage [V]: | 400 |
| WEEE reg. no.: | EN 95902713 |
High-quality 4-axis measuring system with LCD screen and 3 pre-mounted glass scales
Speed range 105 to 1,600 rpm.
Automatic longitudinal feed
Continuous, solid machine bed
Powerful 400 volt motor, this high-voltage device requires a higher mains voltage & is not equipped with a two-pole mains plug
Description of the
The lathe PM2500 is driven by a powerful 400 volt three-phase motor with an output power of 750 watts. Power is reliably transmitted via a double belt pulley with two drive belts. The working spindle gear, which runs in an oil bath, allows six different spindle speeds from 105 to 1,600 rpm, which can be set using two control levers. The Hobby lathe is equipped with an automatic longitudinal feed. To select the different feed speeds for turning and the different pitches for thread cutting, the required change gear combinations are used according to the change gear table. All required change gears are included in the scope of delivery. This model is a lead screw turning machine. To prevent the lead screw from travelling unnecessarily, it can be disengaged via a control lever. The lead screw is completely covered to prevent accidental intervention, and this protection also prevents falling metal chips from sticking. This prevents unnecessary wear and possible damage to the lock nut. The bed slide can be moved manually with the bed slide handwheel via the toothed rack or with a handwheel at the right-hand end of the bed via the lead screw. The guides on the cross and top slides can be adjusted without play using pressure bars. The cast machine bed, which extends over the entire length and ensures high stability and rigidity of the metal lathe, should be emphasised. The prism bed is induction-hardened and ground. The wide headstock and the resulting widely spaced adjustable tapered roller bearings of the spindle shaft ensure a greater support width. This in turn leads to high shaft stability. The ON/OFF switch, the switch for clockwise/anticlockwise rotation and the emergency stop button are located on the control box above the headstock.
The glass scale measuring system mounted on the lathe is characterised by very extensive functions and display options. Selected functions are shown graphically on the display with a diagonal of 18 cm / 7 inches for better understanding. The position display offers the option of choosing between turning, milling or grinding mode. The languages available are German, English, Spanish, French and Chinese.
The following functions are available in turning mode:
- Taper turning
- Tool compensation
- The traverse path in the X-axis can be displayed either in diameter or radius.
- It is possible to display Z and Z0 combined, i.e. the travel of the bed slide and the travel of the top slide are displayed as a total.
The following functions are available in the milling operating mode:
- Inclined contour / surface: Milling of phases or diagonal surfaces
- Setting any number of holes at an even distance on a straight line (SHL function)
- Milling a radius or circular arc
- Representation of a bolt hole circle for evenly spaced holes on a circular arc
- Determination of the centre point between two points
The values can be displayed in mm or inches in all operating modes. It is possible to change the sign when displaying the individual axes. A standby mode can be activated on the position display. The display brightness, date, time and acoustic signals can be set. A calculator function with memory is also available.
Please note: The specified travel distances may be reduced if the measuring bars are fitted.
Scope of delivery
- 1 x lathe PM2500
- 1 x operating instructions
- 1 x lathe chuck (3-jaw chuck, 125 mm)
- 1 x Set of outer jaws
- 1 x chuck spanner
- 1 x set of change wheels
- 1 x set of open-end spanners
- 1 x splash guard
- 1 x chip tray
- 1 x glass scale 120 mm incl. cover
- 1 x glass scale 170 mm incl. cover
- 1 x glass scale 470 mm incl. cover
- 1 x position indicator with LCD screen incl. mains cable
- 1 x Holder for position indicator
- 1 x Operating instructions for measuring system
More about the brand and products from
The lathe PM2500 is driven by a powerful 400 volt three-phase motor with an output power of 750 watts. Power is reliably transmitted via a double belt pulley with two drive belts. The working spindle gear, which runs in an oil bath, allows six different spindle speeds from 105 to 1,600 rpm, which can be set using two control levers. The Hobby lathe is equipped with an automatic longitudinal feed. To select the different feed speeds for turning and the different pitches for thread cutting, the required change gear combinations are used according to the change gear table. All required change gears are included in the scope of delivery. This model is a lead screw turning machine. To prevent the lead screw from travelling unnecessarily, it can be disengaged via a control lever. The lead screw is completely covered to prevent accidental intervention, and this protection also prevents falling metal chips from sticking. This prevents unnecessary wear and possible damage to the lock nut. The bed slide can be moved manually with the bed slide handwheel via the toothed rack or with a handwheel at the right-hand end of the bed via the lead screw. The guides on the cross and top slides can be adjusted without play using pressure bars. The cast machine bed, which extends over the entire length and ensures high stability and rigidity of the metal lathe, should be emphasised. The prism bed is induction-hardened and ground. The wide headstock and the resulting widely spaced adjustable tapered roller bearings of the spindle shaft ensure a greater support width. This in turn leads to high shaft stability. The ON/OFF switch, the switch for clockwise/anticlockwise rotation and the emergency stop button are located on the control box above the headstock.
The glass scale measuring system mounted on the lathe is characterised by very extensive functions and display options. Selected functions are shown graphically on the display with a diagonal of 18 cm / 7 inches for better understanding. The position display offers the option of choosing between turning, milling or grinding mode. The languages available are German, English, Spanish, French and Chinese.
The following functions are available in turning mode:
- Taper turning
- Tool compensation
- The traverse path in the X-axis can be displayed either in diameter or radius.
- It is possible to display Z and Z0 combined, i.e. the travel of the bed slide and the travel of the top slide are displayed as a total.
The following functions are available in the milling operating mode:
- Inclined contour / surface: Milling of phases or diagonal surfaces
- Setting any number of holes at an even distance on a straight line (SHL function)
- Milling a radius or circular arc
- Representation of a bolt hole circle for evenly spaced holes on a circular arc
- Determination of the centre point between two points
The values can be displayed in mm or inches in all operating modes. It is possible to change the sign when displaying the individual axes. A standby mode can be activated on the position display. The display brightness, date, time and acoustic signals can be set. A calculator function with memory is also available.
Please note: The specified travel distances may be reduced if the measuring bars are fitted.
The PM2500 lathe is driven by a powerful 400 volt three-phase motor with an output power of 750 watts. Power is reliably transmitted via a double belt pulley with two drive belts. The working spindle gear, which runs in an oil bath, allows six different spindle speeds from 105 to 1,600 rpm, which can be set using two control levers. The Hobby lathe is equipped with an automatic longitudinal feed. To select the different feed speeds for turning and the different pitches for thread cutting, the required change gear combinations are used according to the change gear table. All required change gears are included in the scope of delivery. The PM2500 is a lead screw turning machine. To prevent the lead screw from travelling unnecessarily, it can be disengaged via a control lever. The lead screw is completely covered to prevent accidental intervention, and this protection also prevents falling metal chips from sticking. This prevents unnecessary wear and possible damage to the lock nut. The bed slide can be moved manually with the bed slide handwheel via the toothed rack or with a handwheel at the right-hand end of the bed via the lead screw. The guides on the cross and top slides can be adjusted without play using pressure bars. The cast machine bed, which extends over the entire length and ensures high stability and rigidity of the metal lathe, should be emphasised. The prism bed is induction-hardened and ground. The wide headstock and the resulting widely spaced adjustable tapered roller bearings of the spindle shaft ensure a greater support width. This in turn leads to high shaft stability. The ON/OFF switch, the switch for clockwise/anticlockwise rotation and the emergency stop button are located on the control box above the headstock.
Despite its compact size, the PM2700 lathe offers a wide range of applications. The gear drive running in an oil bath allows six different spindle speeds from 105 to 1,600 rpm, which are switched with two levers. The Hobby lathe is equipped with an automatic longitudinal feed. To select the different feed speeds for turning and the different pitches for thread cutting, the required change gear combinations are used according to a table. All required change gears are included in the scope of delivery. The PM2700 is a lead screw turning machine. To prevent the lead screw from travelling unnecessarily, it can be disengaged via a control lever. The bed slide can be moved manually with the bed slide handwheel via the gear rack or with a handwheel at the right-hand end of the bed via the lead screw. The cast machine bed, which extends over the entire length and ensures high stability and rigidity of the metal lathe, should be emphasised. The prism bed is induction-hardened and ground. The wide headstock and the resulting widely spaced adjustable tapered roller bearings of the spindle shaft ensure a greater support width. This in turn leads to high shaft stability.
The PM2700 lathe is driven by a powerful 400 volt three-phase motor with an output power of 750 watts. Power is reliably transmitted via a double belt pulley with two drive belts. The working spindle gear, which runs in an oil bath, allows six different spindle speeds from 105 to 1,600 rpm, which can be set using two control levers. The Hobby lathe is equipped with an automatic longitudinal feed. To select the different feed speeds for turning and the different pitches for thread cutting, the required change gear combinations are used according to the change gear table. All required change gears are included in the scope of delivery. This model is a lead screw turning machine. To prevent the lead screw from travelling unnecessarily, it can be disengaged via a control lever. The lead screw is completely covered to prevent accidental intervention, and this protection also prevents falling metal chips from sticking. This prevents unnecessary wear and possible damage to the lock nut. The bed slide can be moved manually with the bed slide handwheel via the toothed rack or with a handwheel at the right-hand end of the bed via the lead screw. The guides on the cross and top slides can be adjusted without play using pressure bars. The cast machine bed, which extends over the entire length and ensures high stability and rigidity of the metal lathe, should be emphasised. The prism bed is induction-hardened and ground. The wide headstock and the resulting widely spaced adjustable tapered roller bearings of the spindle shaft ensure a greater support width. This in turn leads to high shaft stability. The ON/OFF switch, the switch for clockwise/anticlockwise rotation and the emergency stop button are located on the control box above the headstock.
The glass scale measuring system mounted on the lathe is characterised by very extensive functions and display options. Selected functions are shown graphically on the display with a diagonal of 18 cm / 7 inches for better understanding. The position display offers the option of choosing between turning, milling or grinding mode. The languages available are German, English, Spanish, French and Chinese.
The following functions are available in turning mode:
- Taper turning
- Tool compensation
- The traverse path in the X-axis can be displayed either in diameter or radius.
- It is possible to display Z and Z0 combined, i.e. the travel of the bed slide and the travel of the top slide are displayed as a total.
The following functions are available in the milling operating mode:
- Inclined contour / surface: Milling of phases or diagonal surfaces
- Setting any number of holes at an even distance on a straight line (SHL function)
- Milling a radius or circular arc
- Representation of a bolt hole circle for evenly spaced holes on a circular arc
- Determination of the centre point between two points
The values can be displayed in mm or inches in all operating modes. It is possible to change the sign when displaying the individual axes. A standby mode can be activated on the position display. The display brightness, date, time and acoustic signals can be set. A calculator function with memory is also available.
Please note: The specified travel distances may be reduced if the measuring bars are fitted.
€2,299.00*
Content: 1 Piece
€1,649.00*
Content: 1 pcs
€1,679.00*
Content: 1 pcs
€2,249.00*
Content: 1 Piece
So. Jetzt habe ich endlich Zeit. Im Sommer 24 gekauft. Im Vorfeld wurden alle Fragen sofort perfekt beantwortet, Bohrbild, Abmessungen... Lieferung flott und iO, alle zusätzlichen Bestellungen dabei. Aufgestellt, Freude... Mit der Zeit ergeben sich dann halt doch Fragen..., aber alle wieder flott und hinreichend beantwortet, bis hin zu erklärenden Fotos. Reklamationen sofort erledigt zB war der LR Schalter defekt. Tolle Maschine, arbeite gerne damit. Nun zu den Nachteilen: Anleitung ist dürftig, technische Daten muss man erst erfragen... spannung, typ kontrolllampe? Ölmenge?... als PDF wäre die auch hilfreich, da die ex Zeichnungen schlecht lesbar und tlw. auch fehlerhaft sind. Schaltplan fehlt kompĺett Ein Transporthinweis auf die Querlöcher in den Füssen zb. auch Klemmen Längsschlitten war nicht möglich. Eher Konstruktiondsfehler , aber Lösung mit dem tollen Service schnell gefunden und etwas Arbeit rasch behoben. Ein echter Schwachpunkt sind aber die mitgelieferten Abstandshülsen für die Wechselräder, da passt keine Stärke wirklich. Da bleibt nur ordentliche selbermachen. Dass kein Hauptschalter verbaut ist? Man muss jedesmal den Netzstecker ziehen, damit die Netzlampe ausgeht. Habe mir einen gebaut. Das Spindelspiel über selbstsichernde Muttern und den Leisten einstellen ist ein Geduldsspiel. Dass das Reinigen der Spänewanne nur von hinten möglich ist, ist halt blöd, hilft aber wohl der Steifigkeit. Fazit: Gute Maschine, kam passabel eingestellt an. Selten so kompetenten und flotten Support erlebt! Grosses Lob, Sie sind überzeugt davon, keinen Mist zu verkaufen. Firma macht alles zu Zufriedenheit Sehr gerne wieder und weiter so! Grüße aus Wien Helmut
26 December 2024 18:54
Bei mehreren Vergleichen das meist ansprechende Modell und
Bei mehreren Vergleichen das meist ansprechende Modell und bin sehr zufrieden. Preis- Leistungsverhältnis sehr gut.
1 September 2023 18:25
Gute Drehmaschine für den Preis. Man kann
Gute Drehmaschine für den Preis. Man kann natürlich kein hochwertiges industrielles Qualitätsprodukt erwarten, jedoch bekommt man für sein Geld schon einiges geboten. Besonders gut für kleine, bis mittelgroße Drehteile geeignet.
2 June 2023 19:09
Sehr gute Qualität. Sehr schönes Drehmaschine. Weiter
Sehr gute Qualität. Sehr schönes Drehmaschine. Weiter zu empfehlen
5 June 2021 00:00
You get what you pay for...
Grundsätzlich ist an der Funktion der Maschine bisher nichts auszusetzen, aber bei der Optik sieht man schon deutlich, dass die Maschine in China gefertigt wurde. Verbeulte Zubehörkiste, schlechte Oberflächenbearbeitung an der Maschine, schlechte Senkungen an Schrauben würden durch eine deutsche Qualitätskontrolle niemals durchrutschen. Dafür würde sie aber auch mindestens das doppelte kosten... Alles in allem bin ich zufrieden, mir ist die Funktion am wichtigsten, bei der Optik kann man Abstriche in Kauf nehmen. Würde ich sie einem Freund empfehlen? Ja.
Nach den ersten Arbeiten auf der Paulimot PM2500 bin ich begeistert. Sie Übertrifft meine Erwartungen. Der Flansch des 3. Backenfutter läuft auf gut 1/100 genau. Erste Dreharbeiten in Alu ergaben knapp über 1/100 Genauigkeit beim drehen von 70mm auf 40mm Durchmesser / 100mm länge, ohne das mit der Zentrierspitze dagegen gehalten wurde! Das ganze wurde mit einer Präzisen und Kalibrierten Messuhr Schweizer Herstellung ermittelt, da ich der einfachen "daily Messuhr" fast nicht glauben wollte. Die Schlitten / Führungen habe ich nochmal etwas eingestellt, da der Oberschlitten minimal Spiel hatte zu beginn, und der Längsschlitten mir minimal zu Stramm war. Für diesen Preis, darf gerne hier und da mal eine Macke, oder ein Optischer Mangel sein. Sie darf auch etwas lauter vom Getriebe sein, oder die Schlitten je nach weg mal etwas mehr oder weniger Reibung aufweisen. Die Basis, Preis / Leistung passt einfach 100%
10 December 2020 00:00
Besten Dank
eine schöne Baugröße für das Hobby , Laufeigenschaften finde ich gut im Moment die Zeit wird zeigen was alles möglich ist
Die Drehbank macht einen guten Eindruck,kam sauber und gut verpackt bei mir an. Was mir gleich nach dem ersten Probelauf ein wenig negativ aufgefallen ist,daß sie mehr Laufgeräusche verursacht als meine alte Drehbank. Das kommt sicher vom Getriebeantrieb ,den meine alte Drehbank nicht hatte aber das kann ich verschmerzen.Ich hab für mich zwei Verbesserungen angebracht damit ich die Späne besser absaugen kann. Aber sonst top.
29 June 2020 00:00
PM2500
Sehr gute Maschine mit hoher Durchzugskraft (400V). Bisher keine Probleme. Die Lackierung könnte besser sein. Die Schraube für den Drehstahlhalter (Multifix) hat nicht lange gehalten. Die Schrauben am Oberschlitten sind sehr weich. Zweimal den Oberschlitten verstellt, und sie hatten "Endlosgewinde".Das sind aber Kleinigkeiten. Für den Preis der Maschine kann man nicht meckern. Das waren sicher "Montagsschrauben". Auf jedem Fall,kann ich die Maschine weiterempfehlen.
Drehmaschine funktioniert gut und ist einigermaßen genau! Verarbeitung ist eher schlecht.
Shopping basket
