Number punch set 36 pieces, font height: 3 mm
€10.00*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
A number punch set is used for punching and engraving letters and numbers on different materials. These materials include steel, plastic, wood, aluminium, brass and copper. With the help of a punch number set, you can, for example, label nameplates or workpieces with a number or name and mark them individually.
Technical data
| Font height [mm]: | 3 |
|---|---|
| Hardness [HRC]: | 40 - 50 |
| Length of chisel [mm]: | 65 |
| Workpiece material: | Aluminium, Copper, Plastic, Steel, Wood, brass |
36-piece set
Sturdy pins for precise application
Embossing possible on a variety of different materials
Character height: 3 mm
Supplied in a practical storage box
Description of the
This punch number set can be used to punch the letters A to Z, the digits 0 to 9 and the & symbol into materials such as steel, copper, aluminium, brass, plastic, wood and many more. The punched numbers and letters achieve a character height of 3 mm. The respective embossing is mirror-inverted as a relief at the end of the square pins. The embossing has been removed from the striking surfaces to prevent the material from splintering.
To achieve an even typeface, proceed as follows:
- Place the desired letter / number on the material to be punched.
- Now hit the punching pin with a hammer to punch the desired letter / number.
- Depending on the material being punched, you can remove the material pressed away by the embossing using emery paper or sandpaper, for example.
- The depth, width and height of the embossing depends on the impact force used.
Please note that the number 9 is not included in the set. To punch the number 9, please use the punch with the number "6" and rotate it by 180°.
Scope of delivery
- 26 x strike letter (A to Z)
- 9 x beat number (0 to 8)
- 1 x & sign
More about the brand and products from
This punch number set can be used to punch the letters A to Z, the digits 0 to 9 and the & symbol into materials such as steel, copper, aluminium, brass, plastic, wood and many more. The punched numbers and letters achieve a character height of 3 mm. The respective embossing is mirror-inverted as a relief at the end of the square pins. The embossing has been removed from the striking surfaces to prevent the material from splintering.
To achieve an even typeface, proceed as follows:
- Place the desired letter / number on the material to be punched.
- Now hit the punching pin with a hammer to punch the desired letter / number.
- Depending on the material being punched, you can remove the material pressed away by the embossing using emery paper or sandpaper, for example.
- The depth, width and height of the embossing depends on the impact force used.
Please note that the number 9 is not included in the set. To punch the number 9, please use the punch with the number "6" and rotate it by 180°.
This punch number set can be used to punch the letters A to Z, the digits 0 to 9 and the & symbol into materials such as steel, copper, aluminium, brass, plastic, wood and many more. The punched numbers and letters reach a font height of 4 mm. The respective embossing is mirror-inverted as a relief at the end of the square pins. The embossing has been removed from the striking surfaces to prevent the material from splintering.
To achieve an even typeface, proceed as follows:
- Place the desired letter / number on the material to be punched.
- Now hit the punching pin with a hammer to punch the desired letter / number.
- You can remove the material pressed away by the embossing - depending on the material being punched - using emery paper or sandpaper, for example.
- The depth, width and height of the embossing depends on the impact force used.
Please note that the number 9 is not included in the set. To punch the number 9, please use the punch with the number "6" and rotate it by 180°.
This punch number set can be used to punch the letters A to Z, the digits 0 to 9 and the & symbol into materials such as steel, copper, aluminium, brass, plastic, wood and many more. The punched numbers and letters reach a font height of 4.5 mm. The respective embossing is mirror-inverted as a relief at the end of the square pins. The embossing has been removed from the striking surfaces to prevent the material from splintering.
To achieve an even typeface, proceed as follows:
- Place the desired letter / number on the material to be punched.
- Now hit the punching pin with a hammer to punch the desired letter / number.
- You can remove the material pressed away by the embossing - depending on the material being punched - using emery paper or sandpaper, for example.
- The depth, width and height of the embossing depends on the impact force used.
Please note that the number 9 is not included in the set. To punch the number 9, please use the punch with the number "6" and rotate it by 180°.
This punch number set can be used to punch the letters A to Z, the digits 0 to 9 and the & symbol into materials such as steel, copper, aluminium, brass, plastic, wood and many more. The punched numbers and letters reach a font height of 8 mm. The respective embossing is mirror-inverted as a relief at the end of the square pins. The embossing has been removed from the striking surfaces to prevent the material from splintering.
To achieve an even typeface, proceed as follows:
- Place the desired letter / number on the material to be punched.
- Now hit the punching pin with a hammer to punch the desired letter / number.
- You can remove the material pressed away by the embossing - depending on the material being punched - using emery paper or sandpaper, for example.
- The depth, width and height of the embossing depends on the impact force used.
Please note that the number 9 is not included in the set. To punch the number 9, please use the punch with the number "6" and rotate it by 180°.
€10.00*
Content: 1 pcs
€15.00*
Content: 1 pcs
€15.50*
Content: 1 pcs
€28.00*
Content: 1 Piece
12 June 2024 07:18
alles zur vollen zufriedenheit gelaufen, qualität und
alles zur vollen zufriedenheit gelaufen, qualität und preis stehen in einem guten verhältnis gerne wieder!
26 October 2023 05:40
Genau das was ich gesucht hatte.
Genau das was ich gesucht hatte.
27 March 2023 07:17
gute Qualität, erfüllt meine Erwartung
gute Qualität, erfüllt meine Erwartung
28 August 2022 17:53
Zu empfehlen
Keine mengel zu finden
14 November 2020 00:00
Solide Werkzeuge
Die Schlagzahlen und -buchstaben sind völlig OK. Ich hätte mir das Schlagbild nur etwas kleiner vorgestellt. Der Grat ist aber tatsächlich genau 3mm hoch.
19 July 2020 00:00
Gute Qualität
Hatte zwar 3mm Bestellt, gekommen sind dann 2,5. Bin aber trotzdem zuf
17 March 2020 00:00
Super Schlagzahlen
Die Schlagzahlen sind sehr gut für meine Prägearbeiten geeignet und erfüllen daher meine Erwartungen ohne Einschränkung. Das Preis/Leistungsverhältnis ist sehr gut. Ich kann das Produkt nur weiterempfehlen.
10 April 2018 00:00
Perfekt!
Ware wie bestellt
17 February 2018 00:00
Schnelle Lieferung.Super Verarbeitung. Jederzeit gerne wieder.
19 January 2018 00:00
Alles bestens