Hand tap set 3-piece M2.5 x 0.45
€6.00*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
Taps are used to create an internal thread, i.e. a threaded hole, in metal, plastic or other solid materials. A general distinction is made between hand taps and machine taps, also known as single-cut taps. In a 3-part hand tap set, the pre-cutter, centre cutter and finish cutter each cover almost the entire length of the cutting edge. This type of tap is preferably used to produce threads in blind holes. In single-cut taps, the pre-cutter, centre cutter and finish cutter are arranged one behind the other on the cutting edge. This makes these taps particularly suitable for cutting through-hole threads.
Technical data
| Cutting edge length [mm]: | 9 |
|---|---|
| Drill Ø for core hole [mm]: | 2,05 |
| Execution: | right-hand cutting |
| Nominal dimension [mm]: | M2,5 |
| Pitch [mm]: | 0,45 |
| Shank Ø [mm]: | 2,8 |
| Square cross-section [mm]: | 2 |
| Surface coating: | Titanium nitride (TiN) |
| Thread type: | metric ISO standard thread |
| Tolerance class: | h6 |
| Tool material: | HSS |
| Total length [mm]: | 42 |
3-piece set consisting of pre-cutter, centre cutter and finish cutter
For producing a metric ISO standard thread
TiN-coated for longer tool life
Tolerance class h6, manufactured according to DIN 352
Cylindrical shank on square
Description of the
This hand tap set consists of a pre-cutter, a centre cutter and a finish cutter. The pre-cutter is marked with a ring on the shank, the centre cutter with two rings. The finish cutter has no ring. This set is used to produce metric ISO standard threads. The taps are made of HSS and coated with titanium nitride (TiN) to increase their service life. At the end of the cylindrical shank there is a square for mounting in a tap wrench. The taps are manufactured in accordance with DIN 352 and are subject to tolerance class h6.
Scope of delivery
- 1 x pre-cutter M2.5 x 0.45
- 1 x centre cutter M2.5 x 0.45
- 1 x finish cutter M2.5 x 0.45
- 1 x plastic case for storage
More about the brand and products from
1 September 2023 17:39
Sehr gute Sache, ich empfehle den Kauf.
Das Produkt und die Verpackung sind von sehr guter Qualität, ich empfehle den Kauf.
12 August 2022 07:06
Qualität ist wie erwartet, Lieferung schnell und
Qualität ist wie erwartet, Lieferung schnell und gut verpackt.
19 July 2022 09:05
Einwandfreie Qualität, funktionieren wie erwartet!
Einwandfreie Qualität, funktionieren wie erwartet!
22 March 2022 19:32
Super Qualität zum fairen Preis und sehr schneller
Super Qualität zum fairen Preis und sehr schneller Lieferung
8 June 2021 00:00
Hand-Gewindebohrer
Wie beschrieben. Gute Qualität. Sie sind kleiner als üblich. Bei der Bestellung sollte man prüfen, ob man das passende Windeisen zu Hause hat. Andernfalls empfehle ich, ein passendes mit zu bestellen. Kostet nicht die Welt, ermöglich aber den sofortigen Einsatz des Werkzeugs. Jederzeit wieder.
23 February 2021 00:00
Einwandfrei
ok
6 November 2020 00:00
Sehr gut.
Einwandfreie Ware. Schnellstens geliefert.