Dividing attachment set with rotary table Ø 150 mm, tailstock and dividing discs

Dividing attachment set with rotary table Ø 150 mm, tailstock and dividing discs.

Horizontal / vertical dividing attachment, Ø 150 mm

• Adjustable worm
• worm gear ratio 90:1
• Can be used horizontally and vertically
• 360° scale
• through spindle bore MK2
• Flatness of the clamping surface: 0.02 mm;
• Parallelism of the clamping surface to the base body: 0.02 mm;
• Concentricity of the clamping surface: 0.04 mm
• Please refer to the illustration for the exact dimensions.

Height-adjustable tailstock

• Height adjustable from 77 to 103 mm
• Tailstock quill stroke: 27 mm

Partial disc set

• A-disc: 15, 16, 17, 18, 19, 20
• B-disc: 21, 23, 27, 29, 31, 33
• C-disc: 37, 39, 41, 43, 47, 49

With this dividing attachment, the dividing disc sits directly on the axis of rotation. The 24 indexing points evenly positioned on the bolt circle result in a 15° pitch on the full circle. This means that the pitches T = 2, 3, 4, 6, 12 and 24 can be realised with this dividing head. The turntable is always locked when the detent pin in the housing engages in one of the detents. The setting can be fixed using a clamping lever. The attached 360° scale makes it easier to adjust the rotary table. An 80 mm three-jaw chuck is already mounted on the turntable. The housing of the dividing head is ground on two sides so that it can be clamped horizontally and vertically on the milling table using clamping grooves.

Dividing attachment set with rotary table Ø 110 mm, tailstock and dividing discs.

Horizontal / vertical dividing attachment, Ø 110 mm

• Adjustable worm
• worm gear ratio 90:1
• Can be used horizontally and vertically
• 360° scale
• through spindle bore MK2
• Flatness of the clamping surface: 0.02 mm;
• Parallelism of the clamping surface to the base body: 0.02 mm
• Concentricity of the clamping surface: 0.04 mm
• Please refer to the illustration for the exact dimensions.

Height-adjustable tailstock

• Height adjustable from 77 to 103 mm
• Tailstock quill stroke: 27 mm

Partial disc set

• A-disc: 15, 16, 17, 18, 19, 20
• B-disc: 21, 23, 27, 29, 31, 33
• C-disc: 37, 39, 41, 43, 47, 49

A dividing attachment is used to machine a workpiece at specific angular positions. Machining operations such as drilling patterns or gear cutting can be carried out with the aid of a dividing attachment.

- Worm gear ratio 36:1;
- Can be used horizontally and vertically;
- Scale 360°;
- Flatness of the clamping surface: 0.02 mm
- Parallelism of the clamping surface to the base body: 0.02 mm
- Total horizontal height 56 mm;
- Total vertical height 160 mm;
- Slot width 8 mm;
- Net weight 3.5 kg

A dividing attachment is used to machine a workpiece at specific angular positions. A dividing attachment can be used to carry out machining operations such as drilling patterns or gear cutting.

- Adjustable worm
- Worm gear ratio 36:1;
- Can be swivelled horizontally / vertically;
- Scale 360°;
- Flatness of the clamping surface: 0.02 mm;
- Parallelism of the clamping surface to the base body: 0.02 mm;
- Total horizontal height 70 mm;
- Total vertical height 170 mm;
- Slot width 13 mm;
- Net weight 4.9 kg

A dividing attachment is used to machine a workpiece at specific angular positions. Machining operations such as drilling patterns or gear cutting can be carried out with the aid of a dividing attachment.

• Adjustable worm
• worm gear ratio 72:1
• Can be swivelled horizontally / vertically
• 360° scale
• through spindle bore MK2
• Flatness of the clamping surface: 0.02 mm;
• Parallelism of the clamping surface to the base body: 0.02 mm;
• Concentricity of the clamping surface: 0.04 mm
• Total horizontal height: 67 mm
• Total vertical height: 195 mm
• Slot width: 8 mm
• Net weight: 5.3 kg

A dividing attachment is used to machine a workpiece at specific angular positions. A dividing attachment can be used to carry out machining operations such as drilling patterns or gear cutting.

- Adjustable worm
- Worm gear ratio 90:1;
- Can be used horizontally and vertically;
- 360° scale;
- through spindle bore MK2;
- Flatness of the clamping surface: 0.02 mm;
- Parallelism of the clamping surface to the base body: 0.02 mm;
- Concentricity of the clamping surface: 0.04 mm
- Total horizontal height 80 mm;
- Total vertical height 150 mm;
- Slot width 10 mm;
- Net weight 7.8 kg

Horizontal / vertical swivelling dividing head, 110 mm

A dividing attachment is used to machine a workpiece at specific angular positions. A dividing attachment can be used to carry out machining operations such as drilling patterns or gear cutting.

• Adjustable worm
• Worm gear ratio 90:1
• Quick clamping device
• Can be used horizontally and vertically
• 360° scale
• Through spindle bore MK2
• Flatness of the clamping surface: 0.02 mm;
• Parallelism of the clamping surface to the base body: 0.02 mm;
• Concentricity of the clamping surface: 0.04 mm
• Net weight: 12.4 kg

Please refer to the illustration for the exact dimensions.

You can also find a suitable tailstock and dividing discs in our shop.

Precision horizontal / vertical swivelling dividing attachment, 110 mm from VERTEX, model VU-100

A dividing attachment is used to machine a workpiece at specific angular positions. With the aid of a dividing attachment, machining operations such as drilling patterns or gear cutting can be carried out.

- Adjustable worm, hardened and ground;
- Worm gear ratio 90:1;
- Quick clamping device;
- Can be used horizontally and vertically;
- 360° scale;
- through spindle bore MK2;
- Flatness of the clamping surface: 0.02 mm;
- Parallelism of the clamping surface to the base body: 0.02 mm;
- Concentricity of the clamping surface: 0.02 mm.

The scope of delivery also includes an Allen key and four low-tension blocks for M10.

Please refer to the illustration for the exact dimensions.

You can also find a suitable tailstock and dividing discs in our shop.

Precision horizontal / vertical dividing attachment, 110 mm from VERTEX, model HV-4

A dividing attachment is used to machine a workpiece at specific angular positions. A dividing attachment can be used to carry out machining operations such as drilling patterns or gear cutting.

- Adjustable worm, hardened and ground;
- Worm gear ratio 90:1;
- Quick clamping device;
- Can be used horizontally and vertically;
- 360° scale;
- through spindle bore MK2;
- Flatness of the clamping surface: 0.02 mm;
- Parallelism of the clamping surface to the base body: 0.02 mm;
- Concentricity of the clamping surface: 0.02 mm.

Please refer to the illustration for the exact dimensions.

You can also find a suitable tailstock and dividing discs in our shop.

Horizontal / vertical swivelling dividing head, Ø 150 mm

A dividing attachment is used to machine a workpiece at specific angular positions. A dividing attachment can be used to carry out machining operations such as drilling patterns or gear cutting.

• Adjustable worm
• Worm gear ratio 90:1
• Quick clamping device
• Can be used horizontally and vertically
• 360° scale
• through spindle bore MK2
• Flatness of the clamping surface: 0.02 mm;
• Parallelism of the clamping surface to the base body: 0.02 mm;
• Concentricity of the clamping surface: 0.04 mm
• Net weight: 19.7 kg

The scope of delivery also includes four low-tension blocks for M10 and four hexagon socket screws M10 x 30 mm.

Please refer to the illustration for the exact dimensions.

You can also find a suitable tailstock and dividing discs in our shop.

Precision horizontal / vertical swivelling dividing attachment, 150 mm from VERTEX, model VU-150

A dividing attachment is used to machine a workpiece at specific angular positions. A dividing attachment can be used to carry out machining operations such as drilling patterns or gear cutting.

- Adjustable worm, hardened and ground;
- Worm gear ratio 90:1;
- Quick clamping device;
- Can be used horizontally and vertically;
- 360° scale;
- through spindle bore MK2;
- Flatness of the clamping surface: 0.02 mm;
- Parallelism of the clamping surface to the base body: 0.02 mm;
- Concentricity of the clamping surface: 0.02 mm.

The scope of delivery also includes an Allen key and four low-tension blocks for M10.

Please refer to the illustration for the exact dimensions.

You can also find a suitable tailstock and dividing discs in our shop.

Precision horizontal / vertical dividing attachment, 150 mm from VERTEX, model HV-6

A dividing attachment is used to machine a workpiece at specific angular positions. A dividing attachment can be used to carry out machining operations such as drilling patterns or gear cutting.

- Adjustable worm, hardened and ground;
- Worm gear ratio 90:1;
- Quick clamping device;
- Can be used horizontally and vertically;
- 360° scale;
- through spindle bore MK2;
- Flatness of the clamping surface: 0.02 mm;
- Parallelism of the clamping surface to the base body: 0.02 mm;
- Concentricity of the clamping surface: 0.02 mm.

Please refer to the illustration for the exact dimensions.

You can also find a matching tailstock and dividing discs in our shop.

A dividing attachment is used to machine a workpiece at specific angular positions. Machining operations such as drilling patterns or gear cutting can be carried out with the aid of a dividing attachment.

- Worm gear ratio 36:1
- Can be used horizontally and vertically
- 360° scale
- Flatness of the clamping surface: 0.02 mm
- Parallelism of the clamping surface to the base body: 0.02 mm
- Total horizontal height 42.5 mm
- Total vertical height 130 mm
- Slot width 8 mm
- Net weight 1.9 kg

A dividing attachment is used to machine a workpiece at specific angular positions. Machining operations such as drilling patterns or gear cutting can be carried out with the aid of a dividing attachment.

- Worm gear ratio 36:1;
- Can be swivelled horizontally / vertically;
- Scale 360°;
- Flatness of the clamping surface: 0.02 mm
- Parallelism of the clamping surface to the base body: 0.02 mm
- Total horizontal height 55 mm;
- Total vertical height 150 mm;
- Slot width 8 mm;
- Net weight 2.4 kg

This dividing attachment is ground on all sides and has a digital angle display. The set or travelled angle can be read in decimal as well as in degrees and angular minutes, which makes operation much easier. The rotary table can be used vertically or horizontally. In order to be able to align the dividing head with the T-slots of the work table when used horizontally, blocks are already mounted on the rotary table. This enables alignment parallel to the axis. A mounting flange for an 80 mm lathe chuck (3- and 4-hole holder) including fastening material is included as standard. Also included are two clamping claws with sliding blocks for clamping on a work table and two rings for using the matching indexing disc set.