Rotary mandrel press, pressing force 2,000 kg
€159.00*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
A rotary mandrel press is used for pressing bearings, bushes and shafts in and out. Light hole punching work is also possible with a mandrel press. Another possible application is broaching with broaches.
Technical data
| Backset dimensions [mm]: | 32 x 32 x 345 |
|---|---|
| Base plate dimensions [mm]: | 415 x 160 |
| Pressing force [kg]: | 2.000 |
| Projection [mm]: | 150 |
| Table diameter [mm]: | 155 |
| Total height [mm]: | 430 |
| Total weight [kg]: | 32,5 |
| Workpiece height max. [mm]: | 185 |
Made from solid grey cast iron
Four-way adjustable table
Pressing force of 2,000 kg
For pressing bearings, bushings, shafts, etc. in and out.
For broaching, punching and pressing
Description of the
This solidly manufactured mandrel press has a four-way adjustable table with a diameter of 155 mm. Four slots of different sizes are milled into this table in order to be able to carry out the most versatile work possible. There are four holes in the base for mounting the mandrel press on a workbench or similar. The hand lever can be clamped in any position.
Scope of delivery
- 1 x rotary mandrel press, pressing force 2,000 kg
Videos
More about the brand and products from
This solidly manufactured mandrel press has a four-way adjustable table with a diameter of 155 mm. Four slots of different sizes are milled into this table in order to be able to carry out the most versatile work possible. There are four holes in the base for mounting the mandrel press on a workbench or similar. The hand lever can be clamped in any position.
This solidly manufactured mandrel press has a four-way adjustable table with a diameter of 115 mm. Four slots of different sizes are milled into this table to enable the most versatile work possible. There are four holes in the base for mounting the mandrel press on a workbench or similar. The hand lever can be clamped in any position.
This solidly manufactured mandrel press has a four-way adjustable table with a diameter of 185 mm. Four slots of different sizes are milled into this table to enable the most versatile work possible. There are four holes in the base for mounting the mandrel press on a workbench or similar. The hand lever can be clamped in any position.
This solidly manufactured mandrel press has a four-way adjustable table with a diameter of 95 mm. Four slots of different sizes are milled into this table in order to be able to carry out the most versatile work possible. There are four holes in the base for mounting the mandrel press on a workbench or similar. The hand lever can be clamped in any position.
€159.00*
Content: 1 pcs
€71.00*
Content: 1 pcs
€230.00*
Content: 1 pcs
€50.00*
Content: 1 pcs
14 December 2022 09:20
Sehr gutes Preis-Leistungsverhältnis und schnelle unkomplizierte Abwicklung.
Sehr gutes Preis-Leistungsverhältnis und schnelle unkomplizierte Abwicklung. Ich bin sehr zufrieden.
7 November 2022 13:48
Ordentliche Presse für die Heimwerkstatt
Ordentlich verarbeitet Presse, die man auch mal auf die Werkbank heben und anschrauben kann, wenn es mit dem Platz zu eng ist. Allerdings auch bei dieser Press sind die Kopfflächen des Pressdorns nicht ganz rechtwinklig zurAchse. Nachfräsen und dann stimmt es. Das wurde schon mehrfach in den Bewertungen angemerkt und es bleibt wohl das Geheimnis des Herstellers, warum er die Flächen nicht rechtwinklig ausführt. Der Dorn lässt sich spielfrei einstellen, so das die Pressenmechanik sauber läuft.
17 August 2022 15:49
Sieht soweit solide aus, leider ist die
Sieht soweit solide aus, leider ist die Höhe für die Räumnadeln zu gering.