Turning chisel set 11-piece with carbide plates P30, DIN 4976, 14 mm

This comprehensive turning tool set with brazed-on carbide inserts can be used for turning work such as longitudinal and facing turning, parting off, grooving, internal boring etc.. This turning tool set is therefore ideal as a "starter set". The scope of delivery includes six different chisels for longitudinal turning, a chisel for facing and chamfering, a turning tool for parting off and grooving, two boring bars for internal boring and a chisel for grooving.

The cutting and flank faces of the turning tools in this set are already pre-ground. In order to achieve optimum turning results, the chip grooves must be ground in. As soon as the cutting edges of a chisel are worn, they must be reground. A diamond grinding disc, for example, is recommended for this.

This threading tool set contains an internal and an external threading tool for threading. The turning tools are fitted with carbide inserts. They can be used to machine almost all possible materials such as plastics, aluminium, non-ferrous metals, iron, cast iron and steel.

The turning tool for external threads has a square shank measuring 14 mm x 14 mm, while the turning tool for internal threads has a round shank with two parallel surfaces. It can either be clamped directly in the steel holder or alternatively with a boring bar holder with an internal diameter of 14 mm.

Thanks to the use of carbide interchangeable inserts, the cut threads are always reproducible and there is no need to grind the cutting edge geometry, which is very important for thread cutting.

This set is supplied in a practical storage box.

This comprehensive HSS turning tool set covers turning work such as longitudinal and facing turning, parting off, grooving, threading etc.. This turning tool set is therefore ideal as a "starter set". The scope of delivery includes three chisels for longitudinal turning, two thread turning tools, a parting tool, a drilling tool and a neutral turning tool with a 60° point angle. The latter can be used for both longitudinal and thread turning.

The turning tools in this set are already ground and therefore ready for immediate use. Thanks to the excellent grindability of HSS steel, these chisels can be easily reground or sharpened for use in mould turning. We recommend corundum or aluminium oxide grinding wheels for grinding HSS steel.

This thread turning tool set includes an internal and an external turning tool for thread turning. The turning tools are fitted with carbide inserts. They can be used to machine almost all possible materials such as plastics, aluminium, non-ferrous metals, iron, cast iron and steel.

The turning tool for external threads has a square shank measuring 14 mm x 14 mm, while the turning tool for internal threads has a round shank with two parallel surfaces. It can either be clamped directly in the steel holder or alternatively with a boring bar holder with an internal diameter of 14 mm.

Thanks to the use of carbide interchangeable inserts, the cut threads are always reproducible and there is no need to grind the cutting edge geometry, which is very important for thread cutting.

This set is supplied in a practical storage box.

This 5-piece turning tool set includes turning tools for longitudinal turning, facing, chamfering, roughing and internal boring. All tools in this set are supplied with the same ISO indexable insert TCMT110204 (carbide, TIN-coated). For special applications, these carbide inserts can be replaced by other inserts that are suitable for the material to be machined.

You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.

The set is completed by a boring bar holder with external dimensions of 15 x 15 mm that matches the boring bar and a Torx spanner required for changing the inserts. The turning tools are supplied in an aluminium case with foam insert for clear and proper storage.

An overview of the technical data and the various application possibilities of the individual turning tools can be found in the third article image.

This 7-piece turning tool set includes turning tools for longitudinal turning, facing, chamfering, roughing and internal boring. All turning tools and the boring bar from this set are supplied with the same ISO indexable insert CCMT09T304 (carbide, TIN-coated). For special applications, these carbide inserts can be replaced by other inserts that are suitable for the material to be machined.

You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.

The set is completed by a boring bar holder with external dimensions of 18 x 18 mm that matches the boring bar and a Torx spanner required for changing the inserts. The turning tools are supplied in a plastic case with a foam insert for clear and proper storage.

An overview of the technical data and the various application options for the individual turning tools can be found in the third article image.

This 9-piece turning tool set includes turning tools for longitudinal turning, facing, chamfering, parting and grooving, thread cutting and internal boring. All tools in this set are supplied with ISO indexable inserts (carbide, TIN-coated). For special applications, these carbide inserts can be replaced by other inserts suitable for the material to be machined.

You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.

The set is completed with a Torx spanner and two Allen keys required for changing inserts. The turning tools are supplied in an aluminium case with a foam insert for clear and proper storage.

An overview of the technical data and the various application options for the individual turning tools can be found in the third article image.