Quick-action drill chuck for clockwise and anti-clockwise rotation 1 - 16 mm MK4
€35.00*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
Drill chucks are used to clamp tools with a cylindrical shank, such as drills, countersinks, reamers, etc. Drill chucks are used in machine tools such as lathes, milling machines or drilling machines. Depending on the type of machine, a drill chuck with a suitable holder is required. A general distinction is made between drill chucks in which the tools are clamped with a spanner and drill chucks in which the tools can be clamped without a spanner, so-called quick-action drill chucks.
Technical data
| Clamping range [mm]: | 1 - 16 |
|---|---|
| Concentricity deviation max. [mm]: | 0,1 |
| Cone mandrel: | MK4 / B18 |
| Inner cone: | B18 |
| Ø drill max. [mm]: | 16 |
Suitable for clockwise and anti-clockwise rotation thanks to locking mechanism
Fast, secure clamping and unclamping
No spanner required
Suitable for use on lathes and drills
Taper arbor and drill chuck connected via cone
Description of the
This quick-action drill chuck has a locking mechanism that prevents the drill chuck from loosening in anti-clockwise rotation. Unlike conventional quick-action drill chucks, this drill chuck is therefore suitable for clockwise and anti-clockwise rotation. The chuck is locked and unlocked by turning the red ring to "LOCK" or "UNLOCK". The drill chuck is supplied with a tapered arbour. The taper arbor and drill chuck are connected to each other via a form-fit B18 cone, i.e. the taper arbor can be separated from the drill chuck. The taper arbor has a drive-out tab and is therefore suitable for use both in drilling machines and in the tailstock of lathes. The clamping range of this chuck is 1 to 16 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
Scope of delivery
- 1 x quick-release drill chuck for clockwise and anti-clockwise rotation 1 - 16 mm MK4
More about the brand and products from
This quick-action drill chuck has a locking mechanism that prevents the drill chuck from loosening in anti-clockwise rotation. Unlike conventional quick-action drill chucks, this drill chuck is therefore suitable for clockwise and anti-clockwise rotation. The chuck is locked and unlocked by turning the red ring to "LOCK" or "UNLOCK". The drill chuck is supplied with a tapered arbour. The taper arbor and drill chuck are connected to each other via a form-fit B18 cone, i.e. the taper arbor can be separated from the drill chuck. The taper arbor has a drive-out tab and is therefore suitable for use both in drilling machines and in the tailstock of lathes. The clamping range of this chuck is 1 to 16 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
With this precision quick-action drill chuck, the taper arbor and the drill bit holder consist of one part, i.e. the taper arbor cannot be separated from the drill chuck. In contrast to drill chucks with an inserted tapered arbor, this design enables higher concentricity to be achieved. The taper arbor has a drive-out tab and is therefore suitable for use both in drilling machines and in the tailstock of lathes. The clamping range of this chuck is 1 to 13 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
The taper arbor and drill bit holder of this precision quick-action drill chuck consist of one part, i.e. the taper arbor cannot be separated from the drill chuck. In contrast to drill chucks with an inserted tapered arbor, this design enables higher concentricity to be achieved. The taper arbor has a drive-out tab and is therefore suitable for use both in drilling machines and in the tailstock of lathes. The clamping range of this chuck is 1 to 16 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
This quick-action drill chuck is supplied with a tapered arbour. The taper arbor and drill chuck are connected to each other via a positive-locking B16 cone, i.e. the taper arbor can be separated from the drill chuck. The taper arbor has a drive-out tab and is therefore suitable for use both in drilling machines and in the tailstock of lathes. The clamping range of this chuck is 1 to 13 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
This quick-action drill chuck is supplied with a tapered arbour. The taper arbor and drill chuck are connected to each other via a positive-locking B18 cone, i.e. the taper arbor can be separated from the drill chuck. The taper arbor has a drive-out tab and is therefore suitable for use both in drilling machines and in the tailstock of lathes. The clamping range of this chuck is 1 to 16 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
This quick-release drill chuck has a locking mechanism that prevents the drill chuck from loosening during anti-clockwise rotation. As a result, unlike conventional quick-release drill chucks, this drill chuck is suitable for clockwise and anti-clockwise rotation. The chuck is locked and unlocked by turning the red ring to "LOCK" or "UNLOCK". The drill chuck is supplied with a tapered arbour. The taper arbor and drill chuck are connected to each other via a form-fit B16 cone, i.e. the taper arbor can be separated from the drill chuck. The taper arbor has a drive-out tab and is therefore suitable for use both in drilling machines and in the tailstock of lathes. The clamping range of this chuck is 1 to 13 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
€35.00*
Content: 1 pcs
€54.00*
Content: 1 pcs
€61.50*
Content: 1 pcs
€26.00*
Content: 1 pcs
€29.50*
Content: 1 pcs
€31.00*
Content: 1 pcs
4 June 2024 05:53
2 X Bohrspannfutter für Städer Bormaschine
Sehr gute Qualität, Preis perfekt, Laufeigenschaft, Alles in Ordnung. Bei Bedarf werde ich da wieder bestellen
2 March 2023 12:20
Sehr gute Qualität für den Preis. Bleibt
Sehr gute Qualität für den Preis. Bleibt auch bei Linkslauf geschlossen.
21 February 2023 09:39
Perfekt
Präzises Bohfutter, makellos.
31 January 2023 16:55
sehr gute und preiswerte Ware.
sehr gute und preiswerte Ware.
29 November 2022 09:07
Sehr gutes Bohrfutter, zum Spitzen Preis
Sehr gutes Bohrfutter, lässt sich sehr gut bedienen und die angegebene Rundlaufgenauigkeit wird auch absolut eingehalten. Spitzen Preis-Leistungsverhältnis!
23 December 2021 00:00
Perfekte Ware
Wie immer innerhalb kürzester Zeit Topware zum Spitzenpreis
27 October 2021 00:00
Alles bestens, tolle Qualität, schnelle Lieferung.
8 August 2021 00:00
Arbeitet wie es soll.
Arbeitet hervorragend, kann auch kleiner als 1 mm spannen. Preis/Leistung ist und bleibt unschlagbar. Benutze es auf einer größeren Drehbank und hat mich im ersten Monat nicht einmal im Stich gelassen, also versprechend für die Zukunft.