Machine vice 80 mm jaw width
€113.00*
% €117.00* (3.42% saved)Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Description of the
Machine vice, ground on all sides, with prism jaw, accuracy 0.005 mm
Jaw width: 80 mm
Jaw height: 40 mm
Clamping range max.: 95 mm
Total height: 84 mm
More about the brand and products from
Machine vice, ground on all sides, with prism jaw, accuracy 0.005 mm
Jaw width: 80 mm
Jaw height: 40 mm
Clamping range max.: 95 mm
Total height: 84 mm
Machine vice, ground on all sides, with prism jaw, accuracy 0.005 mm
Jaw width: 50 mm
Jaw height: 25 mm
Clamping range max.: 60 mm
Total height: 50 mm
This small vice, ground on all sides, is suitable for fine drilling and milling work. Its quick-adjustment mechanism enables rapid presetting of the four clamping ranges. The movable jaw can be clamped within these ranges using the spindle. This quick adjustment makes it particularly easy to switch between workpieces of different sizes. The handle is knurled for a good grip. A cross hole is provided at the end of the handle. A shaft with the appropriate diameter can be inserted into this cross hole, which can then be used as a lever to increase the clamping force. The vice can be attached to a machine table using the elongated holes on the side and the hammerhead screws included in the scope of delivery.
Machine vice, ground on all sides, with prism jaw, accuracy 0.005 mm
Jaw width: 63 mm
Jaw height: 31 mm
Clamping range max.: 80 mm
Total height: 63 mm
Machine vice, ground on all sides, with prism jaw, accuracy 0.005 mm
Jaw width: 100 mm
Jaw height: 45 mm
Clamping range max.: 119 mm
Total height: 95 mm
This vice is ground on all sides and is suitable for drilling and milling work. Its quick-adjustment mechanism enables rapid presetting of the eight clamping ranges. The movable jaw can be clamped within these ranges using the spindle. This quick adjustment makes it particularly easy to change between workpieces of different sizes. The handle is knurled for a good grip. A cross hole is provided at the end of the handle. A shaft with an appropriate diameter can be inserted into this cross hole, which can then be used as a lever to increase the clamping force. The vice can be attached to a machine table using the elongated holes on the side.
€113.00*
Content: 1 pcs
€57.00*
Content: 1 pcs
€59.90*
Content: 1 pcs
€75.00*
Content: 1 pcs
€178.00*
Content: 1 pcs
€127.00*
Content: 1 pcs
30 May 2024 12:57
Wie immer eine superschnelle Lieferung. Hochwertige Verpackung.
Wie immer eine superschnelle Lieferung. Hochwertige Verpackung. Sehr hochwertiger Schraubstock.
8 December 2023 05:09
Sehr guter Schraubstock
Sehr gute Verarbeitung und hohe Präzision. Ich empfehle diesen Schraubstock zum Kauf.
14 February 2023 09:07
Äußerst zufriedenstellende Qualität in jeder Hinsicht, somit
Äußerst zufriedenstellende Qualität in jeder Hinsicht, somit Preis- Leistungsverhältnis sehr gut !
5 December 2021 00:00
Toller Maschinenschraubstock
Sehr sauber verarbeiteter Maschinenschraubstock! Die Seiten sind absolut rechtwinklig zum Schraubstockboden, und die Backen schließen präzise und ohne Spalt. Ich kann den Schraubstock nach drei Wochen Einsatz in der Werkstatt nur weiterempfelen.
21 February 2021 00:00
Maschinenschraubstock 80 mm
Diesen Maschinenschraubstock finde ich sehr gut und sehr preiswert. Ich verwende diesen im Modellbau. Lieferung und Verpackung topp. Bin sehr zufrieden
1 January 2021 00:00
top
echt top
25 August 2020 00:00
me convient
me convient
29 June 2020 00:00
Spitze
Echt super Schraubstock für gutes Geld.
16 February 2020 00:00
Erstklassig
Schwerer, präzise schließender Schraubstock. Absolute Kaufempfehlung.
20 January 2020 00:00
Echt Super
Bis jetzt jeder Artikel wie beschrieben habe bis jetzt noch keine bessere Qualität bekommen. Bin sehr zufrieden :) :) :)