Quick-action drill chuck for clockwise and anti-clockwise rotation 1 - 16 mm MK2 / M10
€33.50*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
Drill chucks are used to clamp tools with a cylindrical shank, such as drills, countersinks, reamers, etc. Drill chucks are used in machine tools such as lathes, milling machines or drilling machines. Depending on the type of machine, a drill chuck with a suitable holder is required. A general distinction is made between drill chucks in which the tools are clamped with a spanner and drill chucks in which the tools can be clamped without a spanner, so-called quick-action drill chucks.
Technical data
| Clamping range [mm]: | 1 - 16 |
|---|---|
| Concentricity deviation max. [mm]: | 0,1 |
| Cone mandrel: | MK2 / M10 / B18 |
| Inner cone: | B18 |
| Ø drill max. [mm]: | 16 |
Suitable for clockwise and anti-clockwise rotation thanks to locking mechanism
Fast, secure clamping and unclamping
No clamping spanner required
With tightening thread, suitable for use on milling machines
Taper arbor and drill chuck connected via cone
Description of the
This quick-release drill chuck has a locking mechanism that prevents the drill chuck from loosening during anti-clockwise rotation. As a result, unlike conventional quick-release drill chucks, this drill chuck is suitable for clockwise and anti-clockwise rotation. The chuck is locked and unlocked by turning the red ring to "LOCK" or "UNLOCK". The drill chuck is supplied with a tapered arbour. The taper arbor and drill chuck are connected to each other via a form-fit B18 cone, i.e. the taper arbor can be separated from the drill chuck. The taper arbor has a tightening thread in the Morse taper and is therefore suitable for use in milling machines. The clamping range of this chuck is 1 to 16 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
Note: Drill chucks are not suitable for milling work.
Scope of delivery
- 1 x quick-action drill chuck for clockwise and anti-clockwise rotation 1 - 16 mm MK2 / M10
More about the brand and products from
This quick-release drill chuck has a locking mechanism that prevents the drill chuck from loosening during anti-clockwise rotation. As a result, unlike conventional quick-release drill chucks, this drill chuck is suitable for clockwise and anti-clockwise rotation. The chuck is locked and unlocked by turning the red ring to "LOCK" or "UNLOCK". The drill chuck is supplied with a tapered arbour. The taper arbor and drill chuck are connected to each other via a form-fit B18 cone, i.e. the taper arbor can be separated from the drill chuck. The taper arbor has a tightening thread in the Morse taper and is therefore suitable for use in milling machines. The clamping range of this chuck is 1 to 16 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
Note: Drill chucks are not suitable for milling work.
With this precision quick-action drill chuck, the taper arbor and the drill bit holder consist of one part, i.e. the taper arbor cannot be separated from the drill chuck. In contrast to drill chucks with an inserted taper arbor, this design enables a higher concentricity to be achieved. The taper arbor has a tightening thread in the Morse taper and is therefore suitable for use in milling machines. The clamping range of this chuck is 1 to 13 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
Note: Drill chucks are not suitable for milling work.
With this precision quick-action drill chuck, the taper arbor and the drill bit holder consist of one part, i.e. the taper arbor cannot be separated from the drill chuck. In contrast to drill chucks with an inserted taper arbor, this design enables a higher concentricity to be achieved. The taper arbor has a tightening thread in the Morse taper and is therefore suitable for use on milling machines. The clamping range of this chuck is 1 to 16 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
Note: Drill chucks are not suitable for milling work.
This quick-action drill chuck is supplied including taper arbour. The taper arbor and drill chuck are connected to each other via a form-fit B16 cone, i.e. the taper arbor can be separated from the drill chuck. The taper arbor has a tightening thread in the Morse taper and is therefore suitable for use in milling machines. The clamping range of this chuck is 1 to 13 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
Note: Drill chucks are not suitable for milling work.
This quick-action drill chuck is supplied including taper arbour. The taper arbor and drill chuck are connected to each other via a form-fit B18 cone, i.e. the taper arbor can be separated from the drill chuck. The taper arbor has a tightening thread in the Morse taper and is therefore suitable for use in milling machines. The clamping range of this chuck is 1 to 16 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
Note: Drill chucks are not suitable for milling work.
This quick-release drill chuck has a locking mechanism that prevents the drill chuck from loosening during anti-clockwise rotation. As a result, unlike conventional quick-action drill chucks, this drill chuck is suitable for clockwise and anti-clockwise rotation. The chuck is locked and unlocked by turning the red ring to "LOCK" or "UNLOCK". The drill chuck is supplied with a tapered arbour. The taper arbor and drill chuck are connected to each other via a form-fit B16 cone, i.e. the taper arbor can be separated from the drill chuck. The taper arbor has a tightening thread in the Morse taper and is therefore suitable for use in milling machines. The clamping range of this chuck is 1 to 13 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
Note: Drill chucks are not suitable for milling work.
€33.50*
Content: 1 pcs
€51.50*
Content: 1 pcs
€55.50*
Content: 1 Piece
€24.00*
Content: 1 pcs
€26.50*
Content: 1 pcs
€29.00*
Content: 1 pcs
29 January 2025 15:47
Top Qualität!
Top Qualität!
6 February 2024 12:18
Muss man haben
Sehr gute Verarbeitung spannt sehr gut top Preis Leistung Verhältnis
20 December 2022 09:12
Qualität sehr gut, Preis-Leistungsverhältnis ebenfalls sehr gut
Qualität sehr gut, Preis-Leistungsverhältnis ebenfalls sehr gut
19 December 2021 00:00
erstklassiges Bohrfutter
Nachdem ich immer wieder Probleme mit meinem alten Röhm-Borhfutter hatte (öffnete sich immer im Linkslauf), habe ich das Schnellspann-Bohrfutter von Paulimot getestet. Da ich bei diesem Preis wirklich sehr skeptisch bezüglich Spannvermögen und Rundlauf hatte habe ich das Bohrfutter vor dem ersten Gebrauch vermessen. Dabei habe ich einen geschliffenen Präzisionsbolzen in der Borhfutter eingespannt und den Rundlauf einmal direkt oben am MK2 Schaft und anschließend am Bolzen gemessen. Der Rundlauf am Schaft war besser 0,01mm und am Bolzen habe ich 2,5 1/100mm gemessen. Mehr kann man absolut nicht erwarten und ich bin absolut zufrieden mit dem Bohrfutter. Kann ich nur empfehlen .....
28 November 2021 00:00
erstklassiges Bohrfutter
Zugegeben, ich war trotzt der positiven Bewertungen sehr skeptisch. Das Bohrfutter habe ich für meine Fräsmaschine bestellt, da meine Röhm-Bohrfutter beim Gewindeschneiden im Linkslauf immer öffneten. Das Bohrfutter wurde sehr schnell geliefert und war sehr gut verpackt. Nach entfernen des Ölfilms habe ich das Futter komplett vermessen. Dazu habe ich den Rundlauf direkt unterhalb meiner Frässpindel gemessen (
16 November 2021 00:00
Bohrfutter
Erste Test sehr gut
10 June 2021 00:00
Top-Produkt
Das Bohrfutter wurde, wie gewohnt, sehr schnell geliefert. Ordentlich verpackt mit entsprechendem Korrosionsschutz versehen. Das Bohrfutter erfüllt seinen Zweck sehr gut.
1 June 2021 00:00
Präzisionsteil
Excellenter Rundlauf, schnelle und günstige Lieferung
31 May 2021 00:00
Sehr gut!
das Preis-leistungsverhältnis ist unschlagbar. Läuft auch richtig rund.