Quick-action drill chuck 1-10 mm + taper mandrel MK1 / B12
€23.00*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
Drill chucks are used to clamp tools with a cylindrical shank, such as drills, countersinks, reamers, etc. Drill chucks are used in machine tools such as lathes, milling machines or drilling machines. Depending on the type of machine, a drill chuck with a suitable holder is required. A general distinction is made between drill chucks in which the tools are clamped with a spanner and drill chucks in which the tools can be clamped without a spanner, so-called quick-action drill chucks.
Technical data
| Clamping range [mm]: | 1 - 10 |
|---|---|
| Concentricity deviation max. [mm]: | 0,1 |
| Cone mandrel: | MK1 / B12 |
| Inner cone: | B12 |
| Ø drill max. [mm]: | 10 |
Fast, secure clamping and releasing
No clamping spanner required
Suitable for use on lathes and drills
For clamping tools with a cylindrical shank
Taper arbor and drill chuck connected via cone
Description of the
This quick-action drill chuck is supplied including taper arbour. The taper arbor and drill chuck are connected to each other via a positive-locking B12 cone, i.e. the taper arbor can be separated from the drill chuck. The taper arbor has a drive-out tab and is therefore suitable for use both in drilling machines and in the tailstock of lathes. The clamping range of this chuck is 1 to 10 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
Scope of delivery
- 1 x quick-action drill chuck 1-10 mm with tapered arbour MK1 / B12
More about the brand and products from
This quick-action drill chuck is supplied including taper arbour. The taper arbor and drill chuck are connected to each other via a positive-locking B12 cone, i.e. the taper arbor can be separated from the drill chuck. The taper arbor has a drive-out tab and is therefore suitable for use both in drilling machines and in the tailstock of lathes. The clamping range of this chuck is 1 to 10 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
With this precision quick-action drill chuck, the taper arbor and the drill bit holder consist of one part, i.e. the taper arbor cannot be separated from the drill chuck. In contrast to drill chucks with an inserted tapered arbor, this design enables higher concentricity to be achieved. The taper arbor has a drive-out tab and is therefore suitable for use both in drilling machines and in the tailstock of lathes. The clamping range of this chuck is 1 to 10 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
This quick-release drill chuck has a locking mechanism that prevents the drill chuck from loosening during anti-clockwise rotation. As a result, unlike conventional quick-release drill chucks, this drill chuck is suitable for clockwise and anti-clockwise rotation. The chuck is locked and unlocked by turning the red ring to "LOCK" or "UNLOCK". The drill chuck is supplied with a tapered arbour. The taper arbor and drill chuck are connected to each other via a form-fit B12 cone, i.e. the taper arbor can be separated from the drill chuck. The taper arbor has a drive-out tab and is therefore suitable for use both in drilling machines and in the tailstock of lathes. The clamping range of this chuck is 1 to 10 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
€23.00*
Content: 1 pcs
€49.50*
Content: 1 pcs
€26.50*
Content: 1 pcs
11 May 2021 00:00
Alles Super, gerne wieder.
Alles Super, gerne wieder.
7 May 2021 00:00
drill chuck
Good value and very quick service!
22 April 2021 00:00
Zufrieden
Ich kann das Tool in Bezug auf die Preisqualität empfehlen
15 March 2021 00:00
Schnellspann-Bohrfutter
Alles bestens Gutes Preis- Leistungsverhältnis
31 January 2021 00:00
klasse Ware
superschnelle Lieferung genau wie beschrieben
15 December 2020 00:00
1A
Gute Ware
20 November 2020 00:00
1
Qualität wie immer o.k.
10 April 2020 00:00
Sehr gut.
Besten Dank !! Ware kam sehr schnell , und gut verpackt an . Qualität des Produktes für meine Anwendungen sehr gut !werde wieder bei Ihnen Artikel kaufen , da Preis und Service top sind . Kompliment an alle Arbeiter von Polimot. ??
8 April 2020 00:00
Sehr gut.
Besten Dank !! Ware kam sehr schnell , und gut verpackt an . Qualität des Produktes für meine Anwendungen sehr gut !werde wieder bei Ihnen Artikel kaufen , da Preis und Service top sind . Kompliment an alle Arbeiter von Polimot. ??
18 March 2020 00:00
Bohrfutter MK1
Solides Bohrfutter, nichts zu beanstanden!