Set of external jaws for paulimot three-jaw chuck, 100 mm
€22.50*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
Chuck jaws are an essential component of a lathe chuck. Centrally adjustable lathe chucks are usually equipped with one set of internal or drilling jaws and one set of external or turning jaws. Depending on the application, one of the two jaw variants can be used on the lathe chuck. External jaws are stepped inwards towards the centre of the chuck and are particularly suitable for clamping workpieces with larger diameters.
Technical data
| Hardness [HRC]: | 53 - 58 |
|---|---|
| Jaw width [mm]: | 15 |
| Total height [mm]: | 38,5 |
| Total length [mm]: | 43 |
| Material: | 40Cr steel |
Suitable for paulimot three-jaw chuck, 100 mm
Made from 40Cr steel
Hardened and ground
Degree of hardness: 53 - 58 HRC
Description of the
This set of chuck jaws made of 40Cr steel consists of three stepped outer jaws. The jaws are hardened and ground and numbered on the inside of the guide groove. This numbering allows the jaws to be inserted into the lathe chuck in the correct order to ensure that the workpiece is clamped in the centre of the chuck.
Scope of delivery
- 1 x set of outer jaws for three-jaw chuck, 100 mm
More about the brand and products from
This set of chuck jaws made of 40Cr steel consists of three stepped outer jaws. The jaws are hardened and ground and numbered on the inside of the guide groove. This numbering allows the jaws to be inserted into the lathe chuck in the correct order to ensure that the workpiece is clamped in the centre of the chuck.
This set of chuck jaws made of 40Cr steel consists of three stepped outer jaws. The jaws are hardened and ground and numbered on the inside of the guide groove. This numbering allows the jaws to be inserted into the lathe chuck in the correct order to ensure that the workpiece is clamped in the centre of the chuck.
This set of chuck jaws made from 20CrMnTi steel consists of three stepped outer jaws. The jaws are hardened and ground and numbered on the inside of the guide groove. This numbering allows the jaws to be inserted into the lathe chuck in the correct order to ensure that the workpiece is clamped in the centre of the chuck.
This set of chuck jaws made of 40Cr steel consists of three stepped outer jaws. The jaws are hardened and ground and numbered on the inside of the guide groove. This numbering allows the jaws to be inserted into the lathe chuck in the correct order to ensure that the workpiece is clamped in the centre of the chuck.
This set of chuck jaws made of 40Cr steel consists of three stepped outer jaws. The jaws are hardened and ground and numbered on the inside of the guide groove. This numbering allows the jaws to be inserted into the lathe chuck in the correct order to ensure that the workpiece is clamped in the centre of the chuck.
This set of chuck jaws made of 40Cr. steel consists of three stepped outer jaws. The jaws are hardened and ground and numbered on the inside of the guide groove. This numbering allows the jaws to be inserted into the lathe chuck in the correct order to ensure that the workpiece is clamped in the centre of the chuck.
This set of chuck jaws made from 20CrMnTi steel consists of three stepped outer jaws. The jaws are hardened and ground and numbered on the inside of the guide groove. This numbering allows the jaws to be inserted into the lathe chuck in the correct order to ensure that the workpiece is clamped in the centre of the chuck.
This set of chuck jaws made from 20CrMnTi steel consists of three stepped outer jaws. The jaws are hardened and ground and numbered on the inside of the guide groove. This numbering allows the jaws to be inserted into the lathe chuck in the correct order to ensure that the workpiece is clamped in the centre of the chuck.
This set of chuck jaws made of 40Cr steel consists of three stepped outer jaws. The jaws are hardened and ground and numbered on the inside of the guide groove. This numbering allows the jaws to be inserted into the lathe chuck in the correct order to ensure that the workpiece is clamped in the centre of the chuck.
€22.50*
Content: 1 pcs
€24.50*
Content: 1 pcs
€27.50*
Content: 1 pcs
€20.50*
Content: 1 pcs
€29.50*
Content: 1 pcs
€32.50*
Content: 1 pcs
€36.50*
Content: 1 pcs
€48.00*
Content: 1 pcs
€27.00*
Content: 1 pcs
23 April 2024 21:53
Passt gut auf meine holzman ed 300fd
Passt gut auf mein Holzman ed 300fd "orginal" 3 Backenfutter. BJ2013 Natürlich keine Garantie daß es bei allen Versionen paßt, aber einen vorsichtigen Versuch ist es Wert, da Holzmann nichts im Programm hat.
31 January 2023 14:54
👍🏻
👍🏻
28 August 2022 18:07
Keine mengel zu finden
Keine mengel zu finden