Cross table 185 x 100 mm
€163.00*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
Less than 10 pieces available (online and in specialist shops)
Intended use
A cross table is used on both milling and drilling machines. As a cross table can be moved in both the X and Y axes, the workpiece can be positioned exactly under the tool. This allows precise drilling and milling work to be carried out.
Technical data
| Material cross table: | Cast steel |
|---|---|
| Max. table load [kg]: | 20 |
| Number of T-slots: | 3 |
| Scale division handwheels [mm]: | 0,01 |
| Size of the T-slots [mm]: | 10 (M8) |
| T-slot spacing [mm]: | 35 |
| Table size [mm]: | 185 x 100 |
| Total height [mm]: | 102 |
| X-axis travel [mm]: | 85 |
| Y-axis travel [mm]: | 80 |
Work table ground on all sides
Sturdy and solidly manufactured
Dovetail guides can be adjusted backlash-free using pressure bars
Nonius on both handwheels
Three continuous T-slots 10 mm for sliding blocks M8
Description of the
This cross table is sturdy and solidly made of cast steel. The work table is ground on all sides. It has three continuous T-slots with a width of 10 mm for sliding blocks with an M8 thread. The workpiece is fixed in the desired position on the worktable using clamping claws, hold-down clamps or similar. The cross table can be moved in the X and Y directions using the large handwheels fitted with a vernier. A measuring scale on the Y-axis makes it quick and easy to read off the travel distance. The dovetail guides can be adjusted backlash-free using pressure bars. The spindle of the Y-axis is protected from falling chips by a drag plate.
Scope of delivery
- 1 x cross table 185 x 100 mm
- 2 x hand crank long
- 2 x hand crank short
More about the brand and products fromÂ
This cross table is sturdy and solidly made of cast steel. The work table is ground on all sides. It has three continuous T-slots with a width of 10 mm for sliding blocks with an M8 thread. The workpiece is fixed in the desired position on the worktable using clamping claws, hold-down clamps or similar. The cross table can be moved in the X and Y directions using the large handwheels fitted with a vernier. A measuring scale on the Y-axis makes it quick and easy to read off the travel distance. The dovetail guides can be adjusted backlash-free using pressure bars. The spindle of the Y-axis is protected from falling chips by a drag plate.
This cross table is sturdy and solidly made of cast steel. The work table is ground on all sides. It has two through T-slots for T-nuts with M10 thread. The workpiece is fixed in the desired position on the worktable using clamping claws, hold-down clamps or similar. The cross table can be moved in the X and Y directions using the large handwheels fitted with a vernier. A measuring scale on the Y-axis allows the travel distance to be read quickly and easily. The dovetail guides can be adjusted backlash-free using pressure bars. The spindle of the Y-axis is protected from falling chips by a drag plate.
This swivelling cross table is sturdy and solidly made of cast steel. The work table is ground on all sides. As the table can be rotated through 360°, it can also be milled at any angle diagonal to the axes. The worktable has two continuous T-slots with a width of 10 mm for T-nuts with an M8 thread. The workpiece is fixed in the desired position on the worktable using clamping claws, hold-down clamps or similar. The cross table can be moved in the X and Y directions using the large handwheels fitted with a vernier. A measuring scale on the Y-axis makes it quick and easy to read off the travel distance. The dovetail guides can be adjusted backlash-free using pressure bars. The spindle of the Y-axis is protected from falling chips by a drag plate.
€163.00*
Content: 1 pcs
€202.00*
Content: 1 pcs
€237.00*
Content: 1 pcs
15 September 2025 17:28
Funktioniert so wie erhofft - beim Dazubestellen von Spannpratzenset aufpassen!
Gute Qualität, Spiel beim Links-Rechts-Drehen etwa 50µ, das ist im Hobbybereich gut genug. Kleines Manko auf Seiten des Angebots bei Paulimot: ich konnte dem nicht entnehmen, welche Spannpratzen hierzu passen. M8 war klar, aber erst nach Selbst-Ausmessen der Schienen-Fußbreite war klar, dass das M8-Spannpratzenset im Koffer nicht gepasst hätte. Habe das M8-Set in der Hängebox nachbestellt, das ist schmaler und passt.
18 October 2023 15:10
kreuztisch
Der Kreuztisch und die Teilscheibe sind Super . Ich werde damit beim Drechseln kleine Döschen verzieren. Am Montag bestellt, Mittwoch da !! Jeder Zeit wieder
22 January 2023 11:51
Sehr gut
Sehr gut
30 November 2022 10:09
Kreuztisch 185 x 100 mm
rasche Zustellung. Qualitativ hochwertiges Produkt. Entspricht genau meinen Vorstellungen
24 April 2022 12:27
Empfehlung
Hohe Präzision bei günstigen Preis
29 January 2022 00:00
Sehr gut.
Meine Erwartungen übertroffen.
7 January 2022 00:00
Kreuztisch 185 x 100 mm
0,2 mm Spiel des Gewindes in Nutrichtung. Ist aber nicht ungewöhnlich und i.O. Die Skalen sind gut. Das Spiel der Führungen läßt sich einstellen. Zur Befestigung wurden 2 weitere Ausfräsungen zwischen den vorhandenen in die Basis eingefräst. Das Preis-, Leistungsverhältnis ist in Ordnung.
2 May 2021 00:00
T-Nuten
Die drei T-Nuten sind ca. 1,5 mm außerdem der Mitte (untere Nut zur oben Nut). Da ich den Kreutztisch dringend benötigte, habe ich auf eine Reklamation verzichtet und die T-Nutensteine angepasst.
3 August 2020 00:00
perfekt
schnell geliefert, Ware top, immer wieder
31 May 2020 00:00
Etwas rau in de Handhabe
Sonst GUT