Die holder 38 x 14 mm
€6.00*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
A die holder is used to hold a die.
Technical data
| Nominal dimension [mm]: | 38 x 14 |
|---|---|
| Total length [mm]: | 310 |
| Material: | Zinc die casting |
For holding dies with the dimensions 38 x 14 mm
For slotted and closed dies
Five clamping screws
Handles can be unscrewed
Manufactured according to DIN 225
Description of the
This die holder is made of die-cast zinc in accordance with DIN 225 and is used to hold dies measuring 38 x 14 mm. The inserted die can be secured against falling out and twisting using the locking screws. The holder can be used for both slotted and closed dies. Both handles can be unscrewed.
Scope of delivery
- 1 x die holder 38 x 14 mm
More about the brand and products from
This die holder is made of die-cast zinc in accordance with DIN 225 and is used to hold dies measuring 38 x 14 mm. The inserted die can be secured against falling out and twisting using the locking screws. The holder can be used for both slotted and closed dies. Both handles can be unscrewed.
This die holder is made of die-cast zinc in accordance with DIN 225 and is used to hold dies measuring 16 x 5 mm. The inserted die can be secured against falling out and twisting using the locking screws. The holder can be used for both slotted and closed dies. Both handles can be unscrewed.
This die holder is made of die-cast zinc in accordance with DIN 225 and is used to hold dies measuring 20 x 5 mm. The inserted die can be secured against falling out and twisting using the locking screws. The holder can be used for both slotted and closed dies. Both handles can be unscrewed.
This die holder is made of die-cast zinc in accordance with DIN 225 and is used to hold dies measuring 20 x 7 mm. The inserted die can be secured against falling out and twisting using the locking screws. The holder can be used for both slotted and closed dies. Both handles can be unscrewed.
This die holder is made of die-cast zinc in accordance with DIN 225 and is used to hold dies measuring 25 x 9 mm. The inserted die can be secured against falling out and twisting using the locking screws. The holder can be used for both slotted and closed dies. Both handles can be unscrewed.
This die holder is made of die-cast zinc in accordance with DIN 225 and is used to hold dies measuring 30 x 11 mm. The inserted die can be secured against falling out and twisting using the locking screws. The holder can be used for both slotted and closed dies. Both handles can be unscrewed.
This die holder is made of die-cast zinc in accordance with DIN 225 and is used to hold dies measuring 38 x 10 mm. The inserted die can be secured against falling out and twisting using the locking screws. The holder can be used for both slotted and closed dies. Both handles can be unscrewed.
This die holder is made of die-cast zinc in accordance with DIN 225 and is used to hold dies measuring 45 x 18 mm. The inserted die can be secured against falling out and twisting using the locking screws. The holder can be used for both slotted and closed dies. Both handles can be unscrewed.
€6.00*
Content: 1 pcs
€2.00*
Content: 1 pcs
€3.00*
Content: 1 pcs
€2.50*
Content: 1 pcs
€3.00*
Content: 1 pcs
€4.50*
Content: 1 pcs
€6.00*
Content: 1 pcs
€8.50*
Content: 1 pcs
18 November 2022 08:48
Super Preisleistung, gute Qualität
Super Preisleistung, gute Qualität
1 April 2021 00:00
Top
Preis/Leistung sehr gut
14 March 2021 00:00
Sehr stabil
Stabile Ausführung, allerdings musste ich bei der ersten Nutzung einige Grate entfernen, bei dem Preis vertrretbar. Sonst sehr gute Verarbeitung und Passform
15 November 2020 00:00
Qualität
Die Verarbeitung ist ordentlich und maßhaltig, Qualität stimmt, es gibt keine Grate und scharfe Kanten, das Schneideisen ist sehr gut und der Preis attraktiv. Da darf man ruhig zugreifen!