Turning tool with insert 16 x 16 mm SDJCR1616-11
€15.50*
% €18.00* (13.89% saved)Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
Turning tools with replaceable cutting inserts are characterised by the fact that worn cutting edges can be replaced quickly and easily. This eliminates the need for the tedious and time-consuming task of re-sharpening the cutting edge. A further advantage of turning tools with indexable or interchangeable cutting inserts is that, depending on the material to be machined, the most suitable cutting insert can be fitted to the holder. For example, there are special cutting inserts for machining aluminium or non-ferrous metals. Both the holders and the cutting inserts are standardised and can be identified by their respective standard designations.
Technical data
| Area of application: | Longitudinal turning |
|---|---|
| Cross-section of clamping shank [mm]: | 16 x 16 |
| Cutting plate: | DCMT11T304 |
| Execution: | right |
| Standard designation: | SDJCR1616-11 |
| Surface: | burnished |
| Total length [mm]: | 115 |
Right-hand turning tool
Cutting inserts available for specialised applications
Replacement cutting inserts available individually or in sets of 10
Includes a Torx key for quick replacement of the cutting insert
Description of the
This turning tool with the standard designation SDJCR1616-11 has a shank of 16 x 16 mm and an overall length of 115 mm. The cutting insert is made of sintered carbide. In contrast to HSS chisels, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.
Scope of delivery
- 1 x SDJCR1616-11 turning tool
- 1 x T15 Torx key
More about the brand and products from
This turning tool with the standard designation SDJCR1616-11 has a shank of 16 x 16 mm and an overall length of 115 mm. The cutting insert is made of sintered carbide. In contrast to HSS chisels, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.
This turning tool with the standard designation SDJCR1010E07 has a 10 x 10 mm shank and an overall length of 71 mm. The insert is made of sintered carbide. In contrast to HSS chisels, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.
This turning tool with the standard designation SDJCR1212H07 has a shank measuring 12 x 12 mm and an overall length of 101 mm. The insert is made of sintered carbide. In contrast to HSS chisels, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.
This turning tool with the standard designation SDJCR1414H11 has a 14 x 14 mm shank and an overall length of 100 mm. The insert is made of sintered carbide. In contrast to HSS chisels, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.
This turning tool with the standard designation SDJCR2020K11 has a shank measuring 20 x 20 mm and an overall length of 125 mm. The insert is made of sintered carbide. In contrast to HSS chisels, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.
This turning tool with the standard designation SDJCR0610D07 has a shank of 6 x 10 mm and an overall length of 60 mm. The insert is made of sintered carbide. In contrast to HSS chisels, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.
This turning tool with the standard designation SDJCR0810D07 has a shank of 8 x 10 mm and an overall length of 60 mm. The insert is made of sintered carbide. In contrast to HSS chisels, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.
€15.50*
Contents: 1 Piece
€13.90*
Contents: 1 Piece
€14.50*
Contents: 1 Piece
€15.00*
Contents: 1 pcs
€16.50*
Contents: 1 Piece
€13.50*
Contents: 1 Piece
€13.50*
Contents: 1 Piece
1 - 10 by 26 Reviews
20 March 2023 08:42
Top Qualität, werde noch mehr bestellen, bei
Top Qualität, werde noch mehr bestellen, bei Bedarf.
27 November 2022 08:43
Good product for the money
Good product for the money
28 April 2022 11:40
Qualität wie immer.
Super OK.
5 February 2022 00:00
Getestet und happy...
Top Qualität. Gleich eingespannt und getestet. Funktioniert super. Sehr empfehlenswert.
21 December 2021 00:00
Passt
Alles super
21 December 2021 00:00
I.O.
I.O.
28 September 2021 00:00
Drehmeißel mit Schneidplatte 16 x 16 mm SDJCR1616-11
Habe den Drehmeißel schon kurz getestet und bin zufrieden, er macht was er soll.
3 June 2021 00:00
stabieler drehmeissel
Sehr stabieler meissel,und ein guter preis, genau was wir brauchen.
13 April 2021 00:00
Topp Qualität
Topp Qualität und Preis Leistungsverhältnis.
15 January 2021 00:00
Super
Stabiler Wendeplattenhalter. Habe ihn in einem 16mm Multifix.