Drilling jig for round materials 6 - 35 mm, MK3
Intended use
This drilling device for round materials is intended for use on lathes. It is used to drill centred holes in round materials and to prevent the drill from running. While the device is inserted into the tailstock, the drilling tool is clamped in the lathe chuck of the machine.
Technical data
| Inner diameter of drill sleeves [mm]: | 6, 8, 10, 12, 14 |
|---|---|
| Morse taper: | MK3 / M12 |
| Outer diameter [mm]: | 62 |
| Prism width [mm]: | 32 |
| Total length [mm]: | 133 |
| Material: | Steel, hardened |
For producing centred bores in round material
For shafts from 6 - 35 mm
Suitable for use on lathes
Including five hardened drill sleeves
Made from hardened steel
Description of the
Round materials and shafts with diameters from 6 to 35 mm can be securely clamped in this hardened steel drilling device. The fixture has a Morse taper shank for mounting in tailstocks of lathes. The round material to be drilled is clamped in the milled prism via a clamping jaw. Depending on the diameter to be drilled, the corresponding drill sleeve is inserted into the clamping jaw and secured with a grub screw.
Scope of delivery
- 1 x drilling jig MK3 / M12
- 2 x fastening screw M5 x 30
- 2 x fastening screw M5 x 60
- 1 x drill sleeve 6 mm
- 1 x drill sleeve 8 mm
- 1 x drill sleeve 10 mm
- 1 x drill sleeve 12 mm
- 1 x drill sleeve 14 mm
- 2 x hexagon socket spanner
More about the brand and products from
Round materials and shafts with diameters from 6 to 35 mm can be securely clamped in this hardened steel drilling device. The fixture has a Morse taper shank for mounting in tailstocks of lathes. The round material to be drilled is clamped in the milled prism via a clamping jaw. Depending on the diameter to be drilled, the corresponding drill sleeve is inserted into the clamping jaw and secured with a grub screw.
Round materials and shafts with diameters from 6 to 35 mm can be securely clamped in this hardened steel drilling device. The fixture has a Morse taper shank for mounting in tailstocks of lathes. The round material to be drilled is clamped in the milled prism via a clamping jaw. Depending on the diameter to be drilled, the corresponding drill sleeve is inserted into the clamping jaw and secured with a grub screw.
€32.00*
Content: 1 pcs
€31.00*
Content: 1 pcs