Drilling machine vice 100 mm jaw width, rotatable
€78.00*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
A drilling machine vice is used to clamp workpieces professionally so that drilling work can be carried out safely on machine tools (e.g. drilling machines or drilling/milling machines).
Technical data
| Baking material: | Steel |
|---|---|
| Base area [mm]: | 185 x 185 |
| Base body material: | Cast steel |
| Jaw height [mm]: | 30 |
| Jaw width [mm]: | 100 |
| Net weight [kg]: | 4,88 |
| Span (max.) [mm]: | 100 |
| Total height [mm]: | 82 |
100 mm jaw width, 100 mm maximum clamping width
Mounted on swivel head, 360° rotatable
Spindle runs inside the handle
Fixed jaw with vertical and horizontal prisms for clamping cylindrical workpieces
Milled shoulder in clamping jaws for flat workpieces
Description of the
This drilling machine vice is sturdily manufactured and mounted on a swivel head so that it can be rotated through 360°. The slewing ring can be clamped to the machine table using the four slotted holes. The vice can be separated from the swivel head by loosening the two locking screws and can therefore also be used without it. Separated from the slewing ring, the vice can be attached to a machine table using the six elongated holes on the side. The guide of the movable jaw is designed to prevent the jaw from tilting when clamping on one side. Secondly, the handle is designed as a sleeve spindle, i.e. the spindle for the movable jaw runs protected inside the handle. The overall length including the handle does not change when the movable jaw is unscrewed. A cross hole is provided at the end of the handle. A shaft with the appropriate diameter can be inserted into this cross hole, which can then be used as a lever to increase the clamping force. As the vice is made of solid cast steel, it has a comparatively high dead weight, which increases stability during the drilling process. The jaws, one of which has horizontal and vertical prisms, are made of steel and ground.
Scope of delivery
- 1 x Drilling machine vice 100 mm jaw width, rotatable
More about the brand and products from
This drilling machine vice is sturdily manufactured and mounted on a swivel head so that it can be rotated through 360°. The slewing ring can be clamped to the machine table using the four slotted holes. The vice can be separated from the swivel head by loosening the two locking screws and can therefore also be used without it. Separated from the slewing ring, the vice can be attached to a machine table using the six elongated holes on the side. The guide of the movable jaw is designed to prevent the jaw from tilting when clamping on one side. Secondly, the handle is designed as a sleeve spindle, i.e. the spindle for the movable jaw runs protected inside the handle. The overall length including the handle does not change when the movable jaw is unscrewed. A cross hole is provided at the end of the handle. A shaft with the appropriate diameter can be inserted into this cross hole, which can then be used as a lever to increase the clamping force. As the vice is made of solid cast steel, it has a comparatively high dead weight, which increases stability during the drilling process. The jaws, one of which has horizontal and vertical prisms, are made of steel and ground.
This drill press vice is sturdily made. The guidance of the movable jaw should be emphasised. This is designed to prevent the jaw from tilting when clamping on one side. Secondly, the handle is designed as a sleeve spindle, i.e. the spindle for the movable jaw runs protected inside the handle. The overall length including the handle does not change when the movable jaw is unscrewed. A cross hole is provided at the end of the handle. A shaft with the appropriate diameter can be inserted into this cross hole, which can then be used as a lever to increase the clamping force.
As the vice is made of solid cast steel, it has a comparatively high dead weight, which increases stability during the drilling process. The jaws, one of which has horizontal and vertical prisms, are made of steel and ground. The vice can be attached to a machine table using the three elongated holes on the side.
This drill press vice is sturdily made. The guidance of the movable jaw should be emphasised. This is designed to prevent the jaw from tilting when clamping on one side. Secondly, the handle is designed as a sleeve spindle, i.e. the spindle for the movable jaw runs protected inside the handle. The overall length including the handle does not change when the movable jaw is unscrewed. A cross hole is provided at the end of the handle. A shaft with the appropriate diameter can be inserted into this cross hole, which can then be used as a lever to increase the clamping force.
As the vice is made of solid cast steel, it has a comparatively high dead weight, which increases stability during the drilling process. The jaws, one of which has horizontal and vertical prisms, are made of steel and ground. The vice can be attached to a machine table using the three elongated holes on the side.
€78.00*
Content: 1 pcs
€31.50*
Content: 1 pcs
€39.50*
Content: 1 pcs