Drilling/milling machine SIEG SX1P with brushless motor
Intended use
The machine allows both milling and drilling work to be carried out with precision.
Technical data
| Drilling capacity max. [mm]: | 10 |
|---|---|
| Frequency [Hz]: | 50 |
| Gross weight [kg]: | 59 |
| Hole spacing for fastening the machine base [mm]: | 185 / 297, 185 and 297 |
| Machine base dimensions [mm]: | 220 x 335 |
| Machine dimensions (LxWxH) [mm]: | 515 x 360 x 730 |
| Max. distance between spindle and worktable [mm]: | 260 |
| Milling capacity cutter head (max.) [mm]: | 16 |
| Milling capacity finger cutter (max.) [mm]: | 10 |
| Motor power (P1) [W]: | 370 |
| Motor power (P2) [W]: | 250 |
| Net weight [kg]: | 48 |
| Number of T-slots: | 3 |
| Packaging dimensions (LxWxH) [mm]: | 550 x 480 x 650 |
| Projection [mm]: | 140 |
| Quill stroke [mm]: | 24 |
| Size of the T-slots [mm]: | 8 (M6) |
| Spindle holder: | MK2 / M10 |
| Spindle speed (infinitely variable) [rpm].: | 100 - 5.000 |
| Spindle speed [rpm].: | 100 - 5.000 |
| Steps Spindle speed: | variable |
| T-slot spacing [mm]: | 45 |
| Table rotatable [°]: | no |
| Table size [mm]: | 400 x 145 |
| Voltage [V]: | 230 |
| WEEE reg. no.: | EN 95902713 |
| X-axis travel [mm]: | 330 |
| Y-axis travel [mm]: | 160 |
| Z-axis travel [mm]: | 170 |
Driven by a maintenance-free, brushless DC motor with smooth running, which enables optimum torque in the lower speed range
MK2 mount and a 400 x 145 mm cross table
The travel distance can be read on a scale with metric graduations on all handwheels
All guides can be adjusted or readjusted to eliminate play using pressure strips
Speeds ranging from 100 to 5,000 rpm are available for both clockwise and anti-clockwise rotation
Description of the
The SIEG SX1P is a compact, robust 230-volt drilling/milling machine with variable speed control. It is driven by a brushless DC motor with an output power of 250 watts. Power is transmitted quietly via a toothed belt, even at high speeds. The dynamic control ensures high torque even at low speeds. The entire speed range from 100 to 5,000 rpm is covered by one belt position; it is not necessary to change the drive belt. During drilling operations, the quill stroke is controlled via the feed lever, while the machine has an activatable fine feed for precise infeed in the X-axis during milling. In relation to its size, the SX1P has large travel ranges in the X and Y axes. All guides can be adjusted backlash-free using pressure bars. The speed display, the emergency stop button, the switch for clockwise and anti-clockwise rotation and the speed controller are located on the front of the milling head.
The on/off switch is located on the side.
Scope of delivery
- 1 x SIEG SX1P drilling/milling machine
- 1 x Detailed user manual in German
- 1 x MK2/B12 tapered mandrel with M10 internal thread
- 3 x Allen keys
- 2 x open-ended spanners
- 3 x T-slot block M6
- 1 x oil tube
- 1 x set of keys for tool change (socket wrench, hook wrench and pin)
- 1 x M10 clamping screw
- 4 x adjustable feet
More about the brand and products from
