Edge finder with 16 mm shaft, optical and acoustic
Intended use
An edge finder is used to locate reference surfaces or edges. This means that the work spindle of a milling machine can be precisely aligned with the edge of a workpiece with the aid of an edge finder. Edge finders are available in different versions. They are categorised as mechanical edge finders, edge finders with acoustic signalling and edge finders with optical signalling. Versions with combined signalling (acoustic and optical) are also common.
Technical data
| Accuracy [mm]: | 0,01 |
|---|---|
| Clamping shank Ø [mm]: | 16 |
| Execution: | Optical and acoustic |
| Probe Ø [mm]: | 10 |
| Surface: | Hardened and ground |
| Total length [mm]: | 120 |
| WEEE reg. no:: | EN 95902713 |
Clear visual and audible signals
Probe head diameter 10 mm, 16 mm clamping shaft
Hardened and ground
Accuracy 0.01 mm
In a wooden box for proper storage
Description of the
This battery-operated edge finder emits an acoustic and visual signal as soon as the probe head touches the reference edge to be approached. With this type of edge finder, finding the position is clearer and easier than when using mechanical edge finders. Another advantage of optical or acoustic edge finders is that the machine's work spindle does not have to be switched on during the measuring process. The optical and acoustic signalling works for all conductive and even slightly conductive material surfaces. The edge finder has a probe head with a diameter of 10 mm, which is connected to the inside of the clamping shaft via a spring. The clamping shaft has a diameter of 16 mm. The surface is hardened and ground, the accuracy is 0.01 mm. The edge finder is supplied in a wooden box for practical and appropriate storage. To ensure optimum use, the preservative grease must be completely removed before use.
Scope of delivery
- 1 x edge finder with 16 mm shaft, optical and acoustic
- 1 x 23A 12 V battery
- 1 x wooden box with foam insert for storage
More about the brand and products from
