End mill 12 mm + 20 x replacement cutting insert
€113.00*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
Less than 10 pieces available (online and in specialist shops)
Intended use
End mills are used for carving out pockets, producing grooves or contours and for milling over surfaces or edges. With an end mill, very good dimensional accuracy and a smooth surface can be achieved at high speeds and low feed rates.
Technical data
| Clamping shank length [mm]: | 47 |
|---|---|
| Effective length [mm]: | approx. 26 |
| Number of cutting edges: | 1, 2 |
| Standard designation Cutting insert: | APKT1003PDSR |
| Surface coating of cutting insert: | AlTiN |
| Total length [mm]: | 79 |
| Ø clamping shank [mm]: | 16 |
| Ø milling cutter [mm]: | 12,0 |
End mill with nickel-plated surface finish
Incl. 20 replacement cutting inserts
AlTiN-coated inserts
For practical and proper storage in a high-quality aluminium box
Description of the
The milling cutter from this set is suitable for producing grooves with a width of 12 mm, for shoulder milling and for milling over smaller flat surfaces. The milling cutter is not suitable for plunging into a workpiece.
The set consists of an end mill and 20 matching indexable inserts. The milling cutter itself is nickel-coated. This nickel coating provides excellent corrosion protection. Nickel is resistant to air, water, diluted acids, lubricants and most alkalis. Another feature of nickel surfaces is the visual enhancement of the milling cutter.
The advantages and properties of the aluminium-titanium-nitride coating (AlTiN coating): Aluminium-titanium-nitride (AlTiN) is a compound of aluminium, titanium and nitrogen; it is an all-round coating that is suitable for universal use. The AlTiN coating allows hard materials such as steel or stainless steel to be machined, as well as materials such as brass, bronze or plastic. Another advantage over uncoated tools or tools with a TiN coating is that the use of cooling lubricant is not absolutely necessary, although the use of coolant generally increases the service life of the tap. In general, however, the use of coolant increases the service life of the milling cutter.
Scope of delivery
- 1 x end mill 12 mm
- 20 x APKT1003PDSR cutting insert
- 2 x storage box for 10 cutting inserts each
- 1 x Torx spanner
- 1 x aluminium box for storage
More about the brand and products from
Further information on our professional line
The milling cutter from this set is suitable for producing grooves with a width of 12 mm, for shoulder milling and for milling over smaller flat surfaces. The milling cutter is not suitable for plunging into a workpiece.
The set consists of an end mill and 20 matching indexable inserts. The milling cutter itself is nickel-coated. This nickel coating provides excellent corrosion protection. Nickel is resistant to air, water, diluted acids, lubricants and most alkalis. Another feature of nickel surfaces is the visual enhancement of the milling cutter.
The advantages and properties of the aluminium-titanium-nitride coating (AlTiN coating): Aluminium-titanium-nitride (AlTiN) is a compound of aluminium, titanium and nitrogen; it is an all-round coating that is suitable for universal use. The AlTiN coating allows hard materials such as steel or stainless steel to be machined, as well as materials such as brass, bronze or plastic. Another advantage over uncoated tools or tools with a TiN coating is that the use of cooling lubricant is not absolutely necessary, although the use of coolant generally increases the service life of the tap. In general, however, the use of coolant increases the service life of the milling cutter.
The milling cutter from this set is suitable for producing grooves with a width of 16 mm, for shoulder milling and for milling over smaller flat surfaces. The milling cutter is not suitable for plunging into a workpiece.
The set consists of an end mill and 20 matching indexable inserts. The milling cutter itself is nickel-coated. This nickel coating provides excellent corrosion protection. Nickel is resistant to air, water, diluted acids, lubricants and most alkalis. Another feature of nickel surfaces is the visual enhancement of the milling cutter.
The advantages and properties of the aluminium-titanium-nitride coating (AlTiN coating): Aluminium-titanium-nitride (AlTiN) is a compound of aluminium, titanium and nitrogen; it is an all-round coating that is suitable for universal use. The AlTiN coating allows hard materials such as steel or stainless steel to be machined, as well as materials such as brass, bronze or plastic. Another advantage over uncoated tools or tools with a TiN coating is that the use of cooling lubricant is not absolutely necessary, although the use of coolant generally increases the service life of the tap. In general, however, the use of coolant increases the service life of the milling cutter.
The set consists of two end mills, a cutter head, 10 matching indexable inserts for the two end mills and 10 matching indexable inserts for the cutter head.
The end mills from this set are suitable for producing grooves with a width of 12 or 16 mm, for shoulder milling and for milling over smaller flat surfaces. Neither cutter is suitable for plunging into a workpiece.
The cutter head from this set is suitable for face and shoulder milling of surfaces. The diameter of the milling cutter is 50 mm.
All milling cutters in this set are nickel-coated. This nickel coating provides excellent corrosion protection. Nickel is resistant to air, water, diluted acids, lubricants and most alkalis. Another feature of the nickel surfaces is the visual enhancement of the milling cutter.
The two end mills and the cutter head are fitted with TiAlN-coated indexable inserts. The advantages and properties of the titanium-aluminium-nitride coating (TiAlN coating):Titanium-aluminium-nitride (TiAlN) is a combination of the elements titanium, aluminium and nitrogen. A key feature of this coating is its high resistance to heat hardening and oxidation. This coating is intended for use in the machining of hard and tough materials and therefore for high machining temperatures. The TiAlN coating can be used to machine hardened, alloyed steels and cast iron.
€113.00*
Content: 1 pcs
€124.00*
Content: 1 pcs
€251.00*
Content: 1 pcs
25 September 2021 00:00
Entspricht komplett meinen Erwartungen
Gute Qualität