Hand tap set 3-piece M3 x 0.5
€4.90*
% €5.50* (10.91% saved)Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
Taps are used to create an internal thread, i.e. a threaded bore, in metal, plastic or other solid materials. A general distinction is made between hand taps and machine taps, also known as single-cut taps. In a 3-piece hand tap set, the roughing, semi-finishing and finishing cutters each extend almost the entire length of the cutting edge. This type of tap is primarily used for cutting threads in blind holes. In single-flute taps, the roughing, intermediate and finishing cutters are arranged one after the other along the cutting edge. These taps are therefore particularly suitable for cutting through-holes.
Technical data
| Cutting edge length [mm]: | 12 |
|---|---|
| Drill Ø for core hole [mm]: | 2,5 |
| Execution: | right-hand cutting |
| Nominal dimension [mm]: | M3 |
| Pitch [mm]: | 0,5 |
| Shank Ø [mm]: | 3,5 |
| Square cross-section [mm]: | 2,5 |
| Surface coating: | Titanium nitride (TiN) |
| Thread type: | metric ISO standard thread |
| Tolerance class: | h6 |
| Tool material: | HSS |
| Total length [mm]: | 42 |
3-piece set comprising a pre-cutter, centre cutter and finish cutter
For producing a metric ISO standard thread
TiN-coated for a longer service life
Tolerance class h6, manufactured in accordance with DIN 352
Cylindrical shank with square section
Description of the
This hand tap set consists of a pre-cutter, a centre cutter and a finish cutter. The pre-cutter is marked with a ring on the shank, the centre cutter with two rings. The finish cutter has no ring. This set is used to produce metric ISO standard threads. The taps are made of HSS and coated with titanium nitride (TiN) to increase their service life. At the end of the cylindrical shank there is a square for mounting in a tap wrench. The taps are manufactured in accordance with DIN 352 and are subject to tolerance class h6.
Scope of delivery
- 1 x pilot tap M3 x 0.5
- 1 x centre cutter M3 x 0.5
- 1 x finishing tap M3 x 0.5
- 1 x plastic storage case
More about the brand and products from
10 Reviews
26 January 2026 12:09
in Ordnung
in Ordnung
21 October 2025 12:23
Einwandfreie Funktion.
Einwandfreie Funktion.
1 September 2023 17:35
Sehr gute Sache, ich empfehle den Kauf.
Das Produkt und die Verpackung sind von sehr guter Qualität, ich empfehle den Kauf.
26 April 2023 15:21
Handgewindebohrersatz M3
Industriequalität, hohe Standfestigkeit
13 June 2021 00:00
Sehr gutes Preis-Leistungsverhältnis
Für normale Hobby Anwendungen bestens.
1 January 2021 00:00
Gute Qualität zum guten Preis schnell geliefert
Gut geeignet für Sacklöcher
10 October 2020 00:00
Ware OK
Sehr gut
6 March 2020 00:00
Gute Qualität
Die Hand-Gewindebohrer scheiden ein sehr gutes und akorates Gewinde. Die Lieferung erfolgte schnell und ohne Schwierigkeiten. Den Shop würde ich auf alle Fälle weiterempfehlen.
22 August 2019 00:00
Bin zufrieden
Tun was sie sollen...
7 April 2014 00:00
Super