Hand tap set 3-piece M16 x 2
€16.50*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
Taps are used to create an internal thread, i.e. a threaded bore, in metal, plastic or other solid materials. A general distinction is made between hand taps and machine taps, also known as single-cut taps. In a 3-piece hand tap set, the roughing, semi-finishing and finishing cutters each extend almost the entire length of the cutting edge. This type of tap is primarily used for cutting threads in blind holes. In single-flute taps, the roughing, intermediate and finishing cutters are arranged one after the other along the cutting edge. These taps are therefore particularly suitable for cutting through-holes.
Technical data
| Cutting edge length [mm]: | 31 |
|---|---|
| Drill Ø for core hole [mm]: | 14 |
| Execution: | right-hand cutting |
| Nominal dimension [mm]: | M16 |
| Pitch [mm]: | 2,0 |
| Shank Ø [mm]: | 12 |
| Square cross-section [mm]: | 9 |
| Surface coating: | Titanium nitride (TiN) |
| Thread type: | metric ISO standard thread |
| Tolerance class: | h6 |
| Tool material: | HSS |
| Total length [mm]: | 80 |
3-piece set comprising a pre-cutter, centre cutter and finish cutter
For producing a metric ISO standard thread
TiN-coated for a longer service life
Tolerance class h6, manufactured in accordance with DIN 352
Cylindrical shank with square section
Description of the
This hand tap set consists of a pre-cutter, a centre cutter and a finish cutter. The pre-cutter is marked with a ring on the shank, the centre cutter with two rings. The finish cutter has no ring. This set is used to produce metric ISO standard threads. The taps are made of HSS and coated with titanium nitride (TiN) to increase their service life. At the end of the cylindrical shank there is a square for mounting in a tap wrench. The taps are manufactured in accordance with DIN 352 and are subject to tolerance class h6.
Scope of delivery
- 1 x roughing tap M16 x 2
- 1 x centre cutter M16 x 2
- 1 x finishing cutter M16 x 2
- 1 x plastic storage case
More about the brand and products from
1 Review
11 December 2021 00:00
Sehr gutes Preis -Leistung Verhältnis
Gutes Produkt, schnelle und unkomplizierte Lieferung, gerne wieder.