Hand tap set 3-piece M2.5 x 0.45
€4.90*
% €6.00* (18.33% saved)Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
Taps are used to create an internal thread, i.e. a threaded bore, in metal, plastic or other solid materials. A general distinction is made between hand taps and machine taps, also known as single-cut taps. In a 3-piece hand tap set, the roughing, semi-finishing and finishing cutters each extend almost the entire length of the cutting edge. This type of tap is primarily used for cutting threads in blind holes. In single-flute taps, the roughing, intermediate and finishing cutters are arranged one after the other along the cutting edge. These taps are therefore particularly suitable for cutting through-holes.
Technical data
| Cutting edge length [mm]: | 9 |
|---|---|
| Drill Ø for core hole [mm]: | 2,05 |
| Execution: | right-hand cutting |
| Nominal dimension [mm]: | M2,5 |
| Pitch [mm]: | 0,45 |
| Shank Ø [mm]: | 2,8 |
| Square cross-section [mm]: | 2 |
| Surface coating: | Titanium nitride (TiN) |
| Thread type: | metric ISO standard thread |
| Tolerance class: | h6 |
| Tool material: | HSS |
| Total length [mm]: | 42 |
3-piece set comprising a pre-cutter, centre cutter and finish cutter
For producing a metric ISO standard thread
TiN-coated for a longer service life
Tolerance class h6, manufactured in accordance with DIN 352
Cylindrical shank with square section
Description of the
This hand tap set consists of a pre-cutter, a centre cutter and a finish cutter. The pre-cutter is marked with a ring on the shank, the centre cutter with two rings. The finish cutter has no ring. This set is used to produce metric ISO standard threads. The taps are made of HSS and coated with titanium nitride (TiN) to increase their service life. At the end of the cylindrical shank there is a square for mounting in a tap wrench. The taps are manufactured in accordance with DIN 352 and are subject to tolerance class h6.
Scope of delivery
- 1 x roughing tap M2.5 x 0.45
- 1 x centre cutter M2.5 x 0.45
- 1 x finishing cutter M2.5 x 0.45
- 1 x plastic storage case
More about the brand and products from
8 Reviews
25 March 2026 15:15
OK - wie immer
Auch noch nicht eingesetzt , aber optisch einwandfrei
1 September 2023 17:39
Sehr gute Sache, ich empfehle den Kauf.
Das Produkt und die Verpackung sind von sehr guter Qualität, ich empfehle den Kauf.
12 August 2022 07:06
Qualität ist wie erwartet, Lieferung schnell und
Qualität ist wie erwartet, Lieferung schnell und gut verpackt.
19 July 2022 09:05
Einwandfreie Qualität, funktionieren wie erwartet!
Einwandfreie Qualität, funktionieren wie erwartet!
22 March 2022 19:32
Super Qualität zum fairen Preis und sehr schneller
Super Qualität zum fairen Preis und sehr schneller Lieferung
8 June 2021 00:00
Hand-Gewindebohrer
Wie beschrieben. Gute Qualität. Sie sind kleiner als üblich. Bei der Bestellung sollte man prüfen, ob man das passende Windeisen zu Hause hat. Andernfalls empfehle ich, ein passendes mit zu bestellen. Kostet nicht die Welt, ermöglich aber den sofortigen Einsatz des Werkzeugs. Jederzeit wieder.
23 February 2021 00:00
Einwandfrei
ok
6 November 2020 00:00
Sehr gut.
Einwandfreie Ware. Schnellstens geliefert.