HM carbide indexable insert TCMT110204-TiAlN
€5.00*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
Indexable inserts are used in machining and are mounted on the turning tools or milling cutters intended for this purpose. Depending on the intended use or the material to be machined, inserts are available in various shapes and with special coatings. For example, there are special inserts for machining aluminium or non-ferrous metals. The inserts are standardised and can be identified by the respective standard designation. If a cutting insert is worn, it is simply replaced with a new insert.
Technical data
| Areas of application: | Chamfering, Facing, Internal boring, Longitudinal turning |
|---|---|
| Areas of application: | Facing |
| Areas of application: | Internal boring, Longitudinal turning |
| Areas of application: | Longitudinal turning |
| Clearance angle [°]: | 7 |
| Cutting edge radius [mm]: | 0,4 |
| Point angle [°]: | 60 |
| Standard designation: | TCMT110204 |
| Surface: | TiAlN |
Carbide insert with titanium-aluminium-nitrogen coating (TiAlN)
For cutting hard materials such as steel, stainless steel and titanium alloys
High hot hardness and oxidation resistance
For higher cutting speeds
Cooling not absolutely necessary
Description of the
The advantages and properties of the titanium-aluminium-nitrogen coating (TiAlN coating):
The TiAlN coating is an all-round coating that is suitable for universal use. It allows the machining of hard materials such as steel, stainless steel or titanium alloys. Another advantage of this insert is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the insert.
Scope of delivery
- 1 x TCMT110204-TiAlN carbide indexable insert
More about the brand and products from
The advantages and properties of the titanium-aluminium-nitrogen coating (TiAlN coating):
The TiAlN coating is an all-round coating that is suitable for universal use. It allows the machining of hard materials such as steel, stainless steel or titanium alloys. Another advantage of this insert is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the insert.
This cutting insert is made of sintered carbide. In contrast to HSS tools, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and tool life. TiN-coated inserts are intended for universal use. This means that soft materials can be machined in the same way as hard materials.
The advantages and properties of the titanium-aluminium-nitrogen coating (TiAlN coating):
The TiAlN coating is an all-round coating that is suitable for universal use. It allows the machining of hard materials such as steel, stainless steel or titanium alloys. Another advantage of this insert is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the insert.
The advantages and properties of this polished insert:
The highly positive geometry in combination with the sharply ground cutting edges and the sintered chip breakers enable excellent machining of aluminium and non-ferrous metals such as brass, copper, bronze, etc.
Thanks to these geometric properties, particularly good surface results can be achieved. The highly positive geometry reduces the formation of a so-called built-up edge when machining aluminium. Very good results can also be achieved when machining both cast iron and plastics.
The advantages and properties of this polished insert:
The highly positive geometry in combination with the sharply ground cutting edges and the sintered chip breakers enable excellent machining of aluminium and non-ferrous metals such as brass, copper, bronze, etc.
Thanks to these geometric properties, particularly good surface results can be achieved. The highly positive geometry reduces the formation of a so-called built-up edge when machining aluminium. Very good results can also be achieved when machining both cast iron and plastics.
This cutting insert is made of sintered carbide. In contrast to HSS tools, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and tool life. TiN-coated inserts are intended for universal use. This means that soft materials can be machined in the same way as hard materials.
€5.00*
Content: 1 pcs
€40.50*
Content: 1 pcs
€45.00*
Content: 1 pcs
€45.00*
Content: 1 pcs
€5.00*
Content: 1 pcs
€4.50*
Content: 1 pcs
25 February 2025 11:06
HM Wendeschneidplatte TCMT110204-TiAlN
Alles super gelaufen. Die Ware ist auch super.
6 January 2025 20:25
TOP Platte
Preis - Leistung Top.
8 May 2024 19:55
bin sehr zufrieden , denn selbst bei
bin sehr zufrieden , denn selbst bei meiner beanspruchung halten sie stand .
Die schneiden alle Materialien wie Teufel. Allerdings könnte die Standzeit für Stahl etwas höher sein. Ich weiß aber nicht, ob andere Platten länger halten.
Alles ok
9 February 2023 10:55
Gutes Preis- Leistungsverhältnis. Qualität ist gut, Ware
Gutes Preis- Leistungsverhältnis. Qualität ist gut, Ware kommt gut verpackt und unbeschädigt an.
27 November 2022 08:43
Good product for the money
Good product for the money
22 November 2022 10:54
welche ist welche
Habe die Platte noch nicht getestet,aber ein Tip an Paulimot bitte in die Verpackung (Tütchen) einen Zettel beilegen um welche Platte es sich handelt. Da ich 2 verschiedene bestellt habe weiß ich nun nicht welche welche ist. Muß nun anhand von Farbe (beide dunkel) oder durch Testen dies herausfinden.
2 April 2022 08:38
Alles bestens gerne wieder. Kann ich weiterempfehlen.
Alles bestens gerne wieder. Kann ich weiterempfehlen.
3 January 2022 00:00
Top !!!
Très bon produit