HM carbide indexable insert WCMT050308 TiN-coated
€4.50*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
Indexable inserts are used in machining and are mounted on the turning tools or milling cutters intended for this purpose. Depending on the intended use or the material to be machined, inserts are available in various shapes and with special coatings. For example, there are special inserts for machining aluminium or non-ferrous metals. The inserts are standardised and can be identified by the respective standard designation. If a cutting insert is worn, it is simply replaced with a new insert.
Technical data
| Areas of application: | Chamfering, Facing, Internal boring, Longitudinal turning |
|---|---|
| Clearance angle [°]: | 7 |
| Cutting edge radius [mm]: | 0,8 |
| Point angle [°]: | 80 |
| Standard designation: | WCMT050308 |
| Surface: | TiN |
Carbide insert TiN-coated for longer tool life
Universal application range
For machining soft materials such as aluminium
Also suitable for cutting harder materials such as steel
Description of the
This insert is made of sintered carbide. The high temperature resistance of carbide allows higher cutting speeds in contrast to HSS tools. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and tool life. TiN-coated inserts are intended for universal use. This means that soft materials can be machined in the same way as hard materials.
Scope of delivery
- 1 x carbide indexable insert WCMT050308
More about the brand and products from
This insert is made of sintered carbide. The high temperature resistance of carbide allows higher cutting speeds in contrast to HSS tools. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and tool life. TiN-coated inserts are intended for universal use. This means that soft materials can be machined in the same way as hard materials.
The advantages and properties of this polished insert:
The highly positive geometry in combination with the sharply ground cutting edges and the sintered chip breakers enable excellent machining of aluminium and non-ferrous metals such as brass, copper, bronze, etc.
Thanks to these geometric properties, particularly good surface results can be achieved. The highly positive geometry reduces the formation of a so-called built-up edge when machining aluminium. Very good results can also be achieved when machining both cast iron and plastics.
This insert is made of sintered carbide. The high temperature resistance of carbide allows higher cutting speeds in contrast to HSS tools. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and tool life. TiN-coated inserts are intended for universal use. This means that soft materials can be machined in the same way as hard materials.
The advantages and properties of the titanium-aluminium-nitrogen coating (TiAlN coating):
The TiAlN coating is an all-round coating that is suitable for universal use. It allows the machining of hard materials such as steel, stainless steel or titanium alloys. Another advantage of this insert is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the insert.
The advantages and properties of this polished insert:
The highly positive geometry in combination with the sharply ground cutting edges and the sintered chip breakers enable excellent machining of aluminium and non-ferrous metals such as brass, copper, bronze, etc.
Thanks to these geometric properties, particularly good surface results can be achieved. The highly positive geometry reduces the formation of a so-called built-up edge when machining aluminium. Very good results can also be achieved when machining both cast iron and plastics.
The advantages and properties of the titanium-aluminium-nitrogen coating (TiAlN coating):
The TiAlN coating is an all-round coating that is suitable for universal use. It allows the machining of hard materials such as steel, stainless steel or titanium alloys. Another advantage of this insert is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the insert.
€4.50*
Content: 1 pcs
€45.00*
Content: 1 Piece
€40.50*
Content: 1 pcs
€45.00*
Content: 1 pcs
€5.00*
Content: 1 Piece
€5.00*
Content: 1 pcs
16 October 2022 08:57
Schnelle Lieferung ! Artikel kommt in Reserve
Schnelle Lieferung ! Artikel kommt in Reserve und wird erst später eingesetzt !
26 January 2022 00:00
Einfach Top
1A Qualität 1A Beratung und super schnelle Lieferung
7 May 2021 00:00
Perfekt für Alu
Gibt spiegelblankes Bild
15 October 2019 00:00
Super Service
das ideale Produkt wo Preis / Leistung und der Service perfekt stimmen! Da kaufe ich wieder ein! GRATULATION
13 October 2019 00:00
Gute Wendeschneidplatten
Diese Wendeschneidplatten haben den Vorteil , das sie 3 Schneidkanten haben und deshalb lange genutzt werden können . Die Schneidleistung ist sehr gut .
13 October 2019 00:00
Gute Wendeschneidplatte
Diese Wendeschneidplatte hat den Vorteil , das sie 3 Schneidkanten hat und deshalb lange genutzt werden kann . Die Schneidleistung ist sehr gut .
16 August 2019 00:00
Sehr guter und schneller Service
Die Artikel wurden sehr schnell geliefert und ein erforderlicher Umtausch problemlos abgewickelt. Unbedingt empfehlenswerter Internet- Anbieter!
15 April 2019 00:00
Super
Alles super, sehr schneller Lieferung!
14 October 2018 00:00
Qualität zu gutem Preis
bin zufällig drauf gestoßen und hab sofort bestellt! Lief alles schnell und problemlos ab - kann ich weiterempfehlen!
15 November 2017 00:00
die gekauften Originalteile sind zu teuer