HSS broach 8 mm
€49.00*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
A broach can be used to cut keyways or splines in gears, pulleys, drive rollers, etc.
Technical data
| Achievable keyway [mm]: | 8 |
|---|---|
| Achievable keyway [mm]: | 8 |
| Tool material: | HSS steel |
For the production of 8 mm keyways
Spine width 9.7 mm
Made of HSS steel
Description of the
This broach can be used to cut keyways or keyways with a width of 8 mm.
Broaches are usually used in rack and pinion presses or hydraulic workshop presses.
This broach is made of HSS steel and is slightly conical, the cutting edges thicken in the cutting direction. As a result, the broached keyway becomes slightly deeper with each tooth.
To cut a keyway, the workpiece is placed on the work table of the press and the appropriate guide bush is inserted into the bore of the workpiece. The broach is then inserted into the holder, moistened with sufficient cutting oil and pressed through the workpiece with the press. The shims can be used to make the groove deeper.
Scope of delivery
- 1 x HSS broach 8 mm
More about the brand and products from
This broach can be used to cut keyways or keyways with a width of 8 mm.
Broaches are usually used in rack and pinion presses or hydraulic workshop presses.
This broach is made of HSS steel and is slightly conical, the cutting edges thicken in the cutting direction. As a result, the broached keyway becomes slightly deeper with each tooth.
To cut a keyway, the workpiece is placed on the work table of the press and the appropriate guide bush is inserted into the bore of the workpiece. The broach is then inserted into the holder, moistened with sufficient cutting oil and pressed through the workpiece with the press. The shims can be used to make the groove deeper.
This broach can be used to cut keyways or keyways with a width of 2 mm.
Broaches are usually used in rack and pinion presses or hydraulic workshop presses.
This broach is made of HSS steel and is slightly conical, the cutting edges thicken in the cutting direction. As a result, the broached keyway becomes slightly deeper with each tooth.
To cut a keyway, the workpiece is placed on the work table of the press and the appropriate guide bush is inserted into the bore of the workpiece. The broach is then inserted into the holder, moistened with sufficient cutting oil and pressed through the workpiece with the press. The shims can be used to make the groove deeper.
This broach can be used to cut keyways or keyways with a width of 3 mm.
Broaches are usually used in rack and pinion presses or hydraulic workshop presses.
This broach is made of HSS steel and is slightly conical, the cutting edges thicken in the cutting direction. As a result, the broached keyway becomes slightly deeper with each tooth.
To cut a keyway, the workpiece is placed on the work table of the press and the appropriate guide bush is inserted into the bore of the workpiece. The broach is then inserted into the holder, moistened with sufficient cutting oil and pressed through the workpiece with the press. The shims can be used to make the groove deeper.
This broach can be used to cut keyways or keyways with a width of 4 mm.
Broaches are usually used in rack and pinion presses or hydraulic workshop presses.
This broach is made of HSS steel and is slightly conical, the cutting edges thicken in the cutting direction. As a result, the broached keyway becomes slightly deeper with each tooth.
To cut a keyway, the workpiece is placed on the work table of the press and the appropriate guide bush is inserted into the bore of the workpiece. The broach is then inserted into the holder, moistened with sufficient cutting oil and pressed through the workpiece with the press. The shims can be used to make the groove deeper.
This broach can be used to cut keyways or keyways with a width of 5 mm.
Broaches are usually used in rack and pinion presses or hydraulic workshop presses.
This broach is made of HSS steel and is slightly conical, the cutting edges thicken in the cutting direction. As a result, the broached keyway becomes slightly deeper with each tooth.
To cut a keyway, the workpiece is placed on the work table of the press and the appropriate guide bush is inserted into the bore of the workpiece. The broach is then inserted into the holder, moistened with sufficient cutting oil and pressed through the workpiece with the press. The shims can be used to make the groove deeper.
This broach can be used to cut keyways or keyways with a width of 6 mm.
Broaches are usually used in rack and pinion presses or hydraulic workshop presses.
This broach is made of HSS steel and is slightly conical, the cutting edges thicken in the cutting direction. As a result, the broached keyway becomes slightly deeper with each tooth.
To cut a keyway, the workpiece is placed on the work table of the press and the appropriate guide bush is inserted into the bore of the workpiece. The broach is then inserted into the holder, moistened with sufficient cutting oil and pressed through the workpiece with the press. The shims can be used to make the groove deeper.
€49.00*
Content: 1 pcs
€22.00*
Content: 1 Piece
€23.00*
Content: 1 Piece
€25.00*
Content: 1 Piece
€24.50*
Content: 1 pcs
€49.00*
Content: 1 pcs
3 May 2024 10:09
Top Räumnadel!
Top Räumnadel!
7 September 2022 09:49
Zu empfehlen
Sehr gute Verarbeitung. Funktioniert wirklich sehr gut und kann mit teureren Alternativen mithalten.
20 April 2021 00:00
Alles bestens. Gerne wieder.
Schnell. Unkompliziert. Vielen Dank.