HSS-Co5 twist drill set 19 pcs. according to DIN 338 in RoseBox
€26.50*
% €27.00* (1.85% saved)Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Description of the
- right-hand cutting
- ground, type N
- Increased heat resistance thanks to a 5% cobalt alloy, therefore also suitable for tougher materials
- Drill diameters: 1 / 1.5 / 2 / 2.5 / 3 / 3.5 / 4 / 4.5 / 5 / 5.5 / 6 / 6.5 / 7 / 7.5 / 8 / 8.5 / 9 / 9.5 / 10
- supplied in high-quality RoseBox
More about the brand and products from
- right-hand cutting
- ground, type N
- Increased heat resistance thanks to a 5% cobalt alloy, therefore also suitable for tougher materials
- Drill diameters: 1 / 1.5 / 2 / 2.5 / 3 / 3.5 / 4 / 4.5 / 5 / 5.5 / 6 / 6.5 / 7 / 7.5 / 8 / 8.5 / 9 / 9.5 / 10
- supplied in high-quality RoseBox
The drill bits in this eleven-piece core drill bit set are made of HSS steel with a five per cent cobalt content (M35). The cobalt alloy gives the drills increased heat hardness and very good wear resistance. They are suitable for machining stainless steels, hardened steels and high-strength alloys.
The drill bits in this eleven-piece core drill bit set are made of HSS steel with a five per cent cobalt content (M35). The cobalt alloy gives the drills increased heat hardness and very good wear resistance. They are suitable for machining stainless steels, hardened steels and high-strength alloys.
The drill bits in this five-piece core drill bit set are made of HSS steel with a five per cent cobalt content (M35). The cobalt alloy gives the drill bits increased heat hardness and very good wear resistance. They are suitable for machining stainless steels, hardened steels and high-strength alloys.
- right-hand cutting
- ground, type N
- Increased heat resistance due to 5% cobalt alloy, therefore also suitable for tougher materials
- drill diameters: 1 / 1.5 / 2 / 2.5 / 3 / 3.5 / 4 / 4.5 / 5 / 5.5 / 6 / 6.5 / 7 / 7.5 / 8 / 8.5 / 9 / 9.5 / 10 / 10.5 / 11 / 11.5 / 12 / 12.5 / 13
- supplied in high-quality RoseBox
These twist drills for metalworking are made of HSS steel and comply with DIN 338. The 135° drill bit tip with cross-grinding in accordance with DIN 1412 C enables precise spot drilling without centre punching. The THUNDERWEB spiral shape ensures rapid chip evacuation and therefore less heat generation and therefore a longer tool life. Compared to a roll-rolled twist drill, these drills can achieve up to 40 % faster drilling progress and up to 50 % lower feed force. THUNDERWEB drills are suitable for machining alloyed and unalloyed steel with a strength of up to 900 N/mm².
These twist drills for metalworking are made of HSS steel and comply with DIN 338. The 135° drill bit tip with cross-grinding in accordance with DIN 1412 C enables precise spot drilling without centre punching. The THUNDERWEB spiral shape ensures rapid chip evacuation and therefore less heat generation and therefore a longer tool life. Compared to a roll-rolled twist drill, these drills can achieve up to 40 % faster drilling progress and up to 50 % lower feed force. THUNDERWEB drills are suitable for machining alloyed and unalloyed steel with a strength of up to 900 N/mm².
These twist drills for metalworking are made of HSS steel and comply with DIN 338. The 135° drill bit tip with cross-grinding in accordance with DIN 1412 C enables precise spot drilling without centre punching. The THUNDERWEB spiral shape ensures rapid chip evacuation and therefore less heat generation and therefore a longer tool life. Compared to a roll-rolled twist drill, these drills can achieve up to 40 % faster drilling progress and up to 50 % lower feed force. THUNDERWEB drills are suitable for machining alloyed and unalloyed steel with a strength of up to 900 N/mm².
These twist drills for metalworking are made of HSS steel and comply with DIN 338. The 135° drill bit tip with cross-grinding in accordance with DIN 1412 C enables precise spot drilling without centre punching. The THUNDERWEB spiral shape ensures rapid chip evacuation and therefore less heat generation and therefore a longer tool life. Compared to a roll-rolled twist drill, these drills can achieve up to 40 % faster drilling progress and up to 50 % lower feed force. THUNDERWEB drills are suitable for machining alloyed and unalloyed steel with a strength of up to 900 N/mm².
These twist drills for metalworking are made of HSS steel and comply with DIN 338. The 135° drill bit tip with cross-grinding in accordance with DIN 1412 C enables precise spot drilling without centre punching. The THUNDERWEB spiral shape ensures rapid chip evacuation and therefore less heat generation and therefore a longer tool life. Compared to a roll-rolled twist drill, these drills can achieve up to 40 % faster drilling progress and up to 50 % lower feed force. THUNDERWEB drills are suitable for machining alloyed and unalloyed steel with a strength of up to 900 N/mm².
These twist drills for metalworking are made of HSS steel and comply with DIN 338. The 135° drill bit tip with cross-grinding in accordance with DIN 1412 C enables precise spot drilling without centre punching. The THUNDERWEB spiral shape ensures rapid chip evacuation and therefore less heat generation and therefore a longer tool life. Compared to a roll-rolled twist drill, these drills can achieve up to 40 % faster drilling progress and up to 50 % lower feed force. THUNDERWEB drills are suitable for machining alloyed and unalloyed steel with a strength of up to 900 N/mm².
These twist drills for metalworking are made of HSS steel and comply with DIN 338. The 135° drill bit tip with cross-grinding in accordance with DIN 1412 C enables precise spot drilling without centre punching. The THUNDERWEB spiral shape ensures rapid chip evacuation and therefore less heat generation and therefore a longer tool life. Compared to a roll-rolled twist drill, these drills can achieve up to 40 % faster drilling progress and up to 50 % lower feed force. THUNDERWEB drills are suitable for machining alloyed and unalloyed steel with a strength of up to 900 N/mm².
These twist drills for metalworking are made of HSS steel and comply with DIN 338. The 135° drill bit tip with cross-grinding in accordance with DIN 1412 C enables precise spot drilling without centre punching. The THUNDERWEB spiral shape ensures rapid chip evacuation and therefore less heat generation and therefore a longer tool life. Compared to a roll-rolled twist drill, these drills can achieve up to 40 % faster drilling progress and up to 50 % lower feed force. THUNDERWEB drills are suitable for machining alloyed and unalloyed steel with a strength of up to 900 N/mm².
These twist drills for metalworking are made from extremely heat-resistant, cobalt-alloyed HSS steel and comply with DIN 338. The surface of the drill bits is polished. The 135° drill bit tip with cross-grinding enables precise spot drilling without centre punching. The four cutting edges ensure rapid chip evacuation and therefore less heat generation and therefore a longer service life. The drill bits are suitable for machining high-alloy steel and metal with a strength of up to 1000 N/mm², such as acid and heat-resistant steel and stainless steel. The drill core has a conical design and becomes stronger towards the shank. This strengthens the drill bit and increases the service life of the spiral. From a nominal diameter of 5 millimetres, these drill bits have a 3-face clamping shank for a better hold in the drill chuck.
These twist drills for metalworking are made from extremely heat-resistant, cobalt-alloyed HSS steel and comply with DIN 338. The surface of the drill bits is polished. The 135° drill bit tip with cross-grinding enables precise spot drilling without centre punching. The four cutting edges ensure rapid chip evacuation and therefore less heat generation and therefore a longer service life. The drill bits are suitable for machining high-alloy steel and metal with a strength of up to 1000 N/mm², such as acid and heat-resistant steel and stainless steel. The drill core has a conical design and becomes stronger towards the shank. This strengthens the drill bit and increases the service life of the spiral. From a nominal diameter of 5 millimetres, these drill bits have a 3-face clamping shank for a better hold in the drill chuck.
These twist drills for metalworking are made from extremely heat-resistant, cobalt-alloyed HSS steel and comply with DIN 338. The surface of the drill bits is polished. The 135° drill bit tip with cross-grinding enables precise spot drilling without centre punching. The four cutting edges ensure rapid chip evacuation and therefore less heat generation and therefore a longer service life. The drill bits are suitable for machining high-alloy steel and metal with a strength of up to 1000 N/mm², such as acid and heat-resistant steel and stainless steel. The drill core has a conical design and becomes stronger towards the shank. This strengthens the drill bit and increases the service life of the spiral. From a nominal diameter of 5 millimetres, these drill bits have a 3-face clamping shank for a better hold in the drill chuck.
These twist drills for metalworking are made from extremely heat-resistant, cobalt-alloyed HSS steel and comply with DIN 338. The surface of the drill bits is polished. The 135° drill bit tip with cross-grinding enables precise spot drilling without centre punching. The four cutting edges ensure rapid chip evacuation and therefore less heat generation and therefore a longer service life. The drill bits are suitable for machining high-alloy steel and metal with a strength of up to 1000 N/mm², such as acid and heat-resistant steel and stainless steel. The drill core has a conical design and becomes stronger towards the shank. This strengthens the drill bit and increases the service life of the spiral. From a nominal diameter of 5 millimetres, these drill bits have a 3-face clamping shank for a better hold in the drill chuck.
These twist drills for metalworking are made from extremely heat-resistant, cobalt-alloyed HSS steel and comply with DIN 338. The surface of the drill bits is polished. The 135° drill bit tip with cross-grinding enables precise spot drilling without centre punching. The four cutting edges ensure rapid chip evacuation and therefore less heat generation and therefore a longer service life. The drill bits are suitable for machining high-alloy steel and metal with a strength of up to 1000 N/mm², such as acid and heat-resistant steel and stainless steel. The drill core has a conical design and becomes stronger towards the shank. This strengthens the drill bit and increases the service life of the spiral. From a nominal diameter of 5 millimetres, these drill bits have a 3-face clamping shank for a better hold in the drill chuck.
These twist drills for metalworking are made from extremely heat-resistant, cobalt-alloyed HSS steel and comply with DIN 338. The surface of the drill bits is polished. The 135° drill bit tip with cross-grinding enables precise spot drilling without centre punching. The four cutting edges ensure rapid chip evacuation and therefore less heat generation and therefore a longer service life. The drill bits are suitable for machining high-alloy steel and metal with a strength of up to 1000 N/mm², such as acid and heat-resistant steel and stainless steel. The drill core has a conical design and becomes stronger towards the shank. This strengthens the drill bit and increases the service life of the spiral. From a nominal diameter of 5 millimetres, these drill bits have a 3-face clamping shank for a better hold in the drill chuck.
These twist drills for metalworking are made from extremely heat-resistant, cobalt-alloyed HSS steel and comply with DIN 338. The surface of the drill bits is polished. The 135° drill bit tip with cross-grinding enables precise spot drilling without centre punching. The four cutting edges ensure rapid chip evacuation and therefore less heat generation and therefore a longer service life. The drill bits are suitable for machining high-alloy steel and metal with a strength of up to 1000 N/mm², such as acid and heat-resistant steel and stainless steel. The drill core has a conical design and becomes stronger towards the shank. This strengthens the drill bit and increases the service life of the spiral. From a nominal diameter of 5 millimetres, these drill bits have a 3-face clamping shank for a better hold in the drill chuck.
These twist drills for metalworking are made from extremely heat-resistant, cobalt-alloyed HSS steel and comply with DIN 338. The surface of the drill bits is polished. The 135° drill bit tip with cross-grinding enables precise spot drilling without centre punching. The four cutting edges ensure rapid chip evacuation and therefore less heat generation and therefore a longer service life. The drill bits are suitable for machining high-alloy steel and metal with a strength of up to 1000 N/mm², such as acid and heat-resistant steel and stainless steel. The drill core has a conical design and becomes stronger towards the shank. This strengthens the drill bit and increases the service life of the spiral. From a nominal diameter of 5 millimetres, these drill bits have a 3-face clamping shank for a better hold in the drill chuck.
This twist drill bit for metalworking is made of HSS steel and complies with DIN 338. The 135° drill bit tip with cross-grinding in accordance with DIN 1412 C enables precise spot drilling without centre punching. The THUNDERWEB spiral shape ensures rapid chip evacuation and therefore less heat generation and therefore a longer tool life. Compared to a roll-rolled twist drill, this drill achieves up to 40 % faster drilling progress and up to 50 % lower feed force. The THUNDERWEB drill bit is suitable for machining alloyed and unalloyed steel with a strength of up to 900 N/mm².
This twist drill bit for metalworking is made of HSS steel and complies with DIN 338. The 135° drill bit tip with cross-grinding in accordance with DIN 1412 C enables precise spot drilling without centre punching. The THUNDERWEB spiral shape ensures rapid chip evacuation and therefore less heat generation and therefore a longer tool life. Compared to a roll-rolled twist drill, this drill achieves up to 40 % faster drilling progress and up to 50 % lower feed force. The THUNDERWEB drill bit is suitable for machining alloyed and unalloyed steel with a strength of up to 900 N/mm².
This twist drill bit for metalworking is made of HSS steel and complies with DIN 338. The 135° drill bit tip with cross-grinding in accordance with DIN 1412 C enables precise spot drilling without centre punching. The THUNDERWEB spiral shape ensures rapid chip evacuation and therefore less heat generation and therefore a longer tool life. Compared to a roll-rolled twist drill, this drill achieves up to 40 % faster drilling progress and up to 50 % lower feed force. The THUNDERWEB drill bit is suitable for machining alloyed and unalloyed steel with a strength of up to 900 N/mm².
€26.50*
Content: 1 pcs
€6.90*
Content: 1 pcs
€7.90*
Content: 1 pcs
€14.90*
Content: 1 pcs
€54.50*
Content: 1 pcs
€1.50*
Content: 1 pcs
€1.50*
Content: 1 pcs
€1.60*
Content: 1 pcs
€2.00*
Content: 1 pcs
€2.10*
Content: 1 pcs
€2.30*
Content: 1 pcs
€2.40*
Content: 1 pcs
€3.10*
Content: 1 pcs
€4.90*
Content: 1 pcs
€4.90*
Content: 1 pcs
€4.60*
Content: 1 pcs
€4.60*
Content: 1 pcs
€4.90*
Content: 1 pcs
€5.50*
Content: 1 pcs
€5.90*
Content: 1 pcs
€5.90*
Content: 1 pcs
€6.80*
Content: 1 pcs
€9.70*
Content: 1 pcs
€11.50*
Content: 1 pcs
9 November 2021 00:00
Top!
alles top! bohrer kommen in qualitativen etui, selbst mit vergleichbaren markenproduken habe ich keine besseren ergebnisser erzielt
20 July 2021 00:00
Top Firma
Alles super und immer gerne wieder
17 April 2021 00:00
Naja, sie bohren
Beim Vierten Loch ist mir der 4,5er Bohrer schon abgebrochen , in ganz normalem St35, hatte mir etwas mehr Standzeit erhofft.
26 February 2021 00:00
Super Bohrer-Set!
Alle Bohrer sind scharf und eine super Aufbewahrungsbox.
21 October 2020 00:00
Zufrieden wie immer
Zufrieden wie immer
4 May 2020 00:00
Co5 Spiralbohrer Set
Wie schon vorher sehr schneller und korrekter Versand. Die Bohrer verwende ich für Silberstahl und Winkeleisen im Modellbau bis 1/6, meist ohne Schneidöl. Sie laufen sehr rund und sind von der Härte sehr überzeugend. Für mich sehr gut und preislich überzeugend.
24 September 2019 00:00
Hass Bohrer
Sind ein Geschenk aus diesem Grund keine Bewertung über Funktion. Aber schnelle Lieferung
7 March 2019 00:00
Für die Hobbybastler zu empfehlen
Sie verrichten ihre Arbeit haben aber bei Edelstahl ihre Probleme