HSS hand reamer 10 mm fit H7
€10.00*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
A reamer is used for the fine machining of bores. The bores, which should usually be drilled 0.1 to 0.2 mm below the nominal dimension, can be reamed to the final dimension using a reamer. In the vast majority of cases, reamers are used to ream holes for dowel pins. By machining the bore, a high degree of shape and dimensional accuracy as well as a high surface quality of the finished reamed bore are achieved.
Technical data
| Cutting length [mm]: | Approx. 61 |
|---|---|
| Execution: | right-hand cutting |
| Tolerance class: | H7 |
| Total length [mm]: | 133 |
| Ø reamers [mm]: | 10 |
| Material: | HSS |
Tolerance class H7
Made of HSS steel
Right-hand cutting
Cylindrical shank with square
Description of the
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
Scope of delivery
- 1 x manual reamer Ø 10 mm
More about the brand and products from
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
Cylindrical shank with square, right-hand cutting
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
€10.00*
Content: 1 pcs
€3.50*
Content: 1 pcs
€3.50*
Content: 1 pcs
€3.50*
Content: 1 pcs
€4.50*
Content: 1 pcs
€4.50*
Content: 1 pcs
€5.50*
Content: 1 pcs
€6.50*
Content: 1 pcs
€6.50*
Content: 1 pcs
€6.50*
Content: 1 pcs
€7.00*
Content: 1 pcs
€7.50*
Content: 1 pcs
€9.50*
Content: 1 pcs
€10.00*
Content: 1 pcs
€10.00*
Content: 1 pcs
€11.00*
Content: 1 pcs
€11.00*
Content: 1 pcs
€11.50*
Content: 1 pcs
€12.50*
Content: 1 pcs
€13.00*
Content: 1 pcs
€17.00*
Content: 1 pcs
€19.00*
Content: 1 pcs
€22.50*
Content: 1 pcs
1 September 2023 17:39
Sehr gute Sache, ich empfehle den Kauf.
Das Produkt und die Verpackung sind von sehr guter Qualität, ich empfehle den Kauf.
23 March 2023 23:32
Passgenauigkeit ist hervorragend bei meinem Hobby "
Passgenauigkeit ist hervorragend bei meinem Hobby " Dampfmaschinenbau " und Preis-Leistungsverältnis ist zufriedenstellend
20 February 2023 10:39
Tut was er soll! Präzisionswelle sitzt spielfrei!
Tut was er soll! Präzisionswelle sitzt spielfrei!
12 November 2022 06:54
Die Qualität der Reibahle ist gut, das
Die Qualität der Reibahle ist gut, das Preis-Leistungs Verhältnis, die Abwicklung des Kaufes und Die Lieferdauer sehr zufriedenstellend.
14 January 2022 00:00
Gute Reibahle zum ordentlichen Preis
Erfüllt die Erwartungen, guter Preis und Qualität.Schnelle Lieferung.
4 April 2021 00:00
Preis-Leistungsverhältnis beispiellos
Passgenaue Bohrungen erreichen mit eine preisstarken Reibahle.
31 March 2021 00:00
Qualitätswerkzeug
Sehr gutes Werkzeug und sehr schnelle Lieferung
25 December 2020 00:00
Top
Schnelle Lieferung und hohe Maßhaltigkeit
25 October 2020 00:00
Alesatore manuale HSS 10 mm Toll. H7
Buoni articoli per un prezzo equo - Consegna molto veloce - Tutto perfetto
7 October 2020 00:00
HSS-Handreibahle 10 mm Passung H7
Goede artikelen voor een eerlijke prijs - Zeer snelle levering - Alles perfect