HSS hand reamer 14 mm fit H7
€11.00*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
A reamer is used for the fine machining of bores. The bores, which should usually be drilled 0.1 to 0.2 mm below the nominal dimension, can be reamed to the final dimension using a reamer. In the vast majority of cases, reamers are used to ream holes for dowel pins. By machining the bore, a high degree of shape and dimensional accuracy as well as a high surface quality of the finished reamed bore are achieved.
Technical data
| Cutting length [mm]: | Approx. 81 |
|---|---|
| Execution: | right-hand cutting |
| Tolerance class: | H7 |
| Total length [mm]: | 163 |
| Ø reamers [mm]: | 14 |
| Material: | HSS |
Tolerance class H7
Made of HSS steel
Right-hand cutting
Cylindrical shank with square
Description of the
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
Scope of delivery
- 1 x hand reamer Ø 14 mm
More about the brand and products from
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
Cylindrical shank with square, right-hand cutting
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
€11.00*
Content: 1 pcs
€3.50*
Content: 1 pcs
€3.50*
Content: 1 pcs
€3.50*
Content: 1 pcs
€4.50*
Content: 1 pcs
€4.50*
Content: 1 pcs
€5.50*
Content: 1 pcs
€6.50*
Content: 1 pcs
€7.00*
Content: 1 pcs
€7.50*
Content: 1 pcs
€9.50*
Content: 1 pcs
€10.00*
Content: 1 pcs
€10.00*
Content: 1 pcs
€10.00*
Content: 1 pcs
€11.00*
Content: 1 pcs
€11.50*
Content: 1 pcs
€12.50*
Content: 1 pcs
€13.00*
Content: 1 pcs
€17.00*
Content: 1 pcs
€19.00*
Content: 1 pcs
€22.50*
Content: 1 pcs
25 October 2020 00:00
Alesatore manuale HSS 14 mm Toll. H7
Buoni articoli per un prezzo equo - Consegna molto veloce - Tutto perfetto
7 October 2020 00:00
Gut
Ich benutze die Reibahle wie eine Maschinenreibahle mit einer kleinen Drehbank. Bis jetzt habe ich nur Alu verarbeitet und die Reibahle mit viel Spiritus geschmiert.Für den Preis ist die Reibahle super.
7 October 2020 00:00
HSS-Handreibahle 14 mm Passung H7
Goede artikelen voor een eerlijke prijs - Zeer snelle levering - Alles perfect
19 May 2020 00:00
keine Beanstandung 1+
Alles ok funktioniert tadellos
20 February 2020 00:00
Super Einkauf
Die Reibahle wurde sehr schnell mit den übrigen Sachen geliefert. Ein gutes Produkt das in der Toleranz am oberen Ende liegt. Schneller kann man keine hochgenaue Bohrung mit einer super Oberfläche herstellen.
12 February 2020 00:00
Ein gutes Produkt
Eine kostengünstige Reibahle, die zudem sehr schnell geliefert wurde. Die Oberfläche ist sehr gut, die Maßtoleranz liegt bei diesem Exemplar am obersten Ende des Toleranzfeldes. Ein Werkzeug, mit dem sich eng tolerierte Bohrungen in kürzester Zeit herstellen lassen. Genau das hat sie gemacht.
12 June 2019 00:00
Gutes Produkt für kleinen Preisund schnelle Lieferung.
Gutes Produkt für kleinen Preis und schnelle Lieferung.
17 May 2018 00:00
Erstklassiges Werkzeug, preiswert uns sehr schnell geliefert. Vielen Dank.
7 December 2016 00:00
Superschneller Versand, alles bestens
27 November 2016 00:00
Superschneller Versand, alles bestens