HSS hand reamer 16 mm fit H7
€8.90*
% €12.50* (28.8% saved)Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
A reamer is used for the finishing of bores. Bores, which should usually be drilled 0.1 to 0.2 mm below nominal size, can be reamed to the final dimension using a reamer. In the vast majority of cases, reamers are used to ream bores for dowel pins. Machining the bore ensures high dimensional and geometric accuracy, as well as a high surface finish on the finished reamed bore.
Technical data
| Cutting length [mm]: | approx. 86 |
|---|---|
| Execution: | right-hand cutting |
| Tolerance class: | H7 |
| Total length [mm]: | 174 |
| Ø reamers [mm]: | 16 |
| Material: | HSS |
Tolerance class H7
Made from HSS steel
Right-hand cutting
Cylindrical shank with square section
Description of the
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
Scope of delivery
- 1 x hand reamer, Ø 16 mm
More about the brand and products from
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
Cylindrical shank with square, right-hand cutting
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
€8.90*
Contents: 1 pcs
€3.00*
Contents: 1 pcs
€3.00*
Contents: 1 pcs
€3.00*
Contents: 1 pcs
€3.50*
Contents: 1 pcs
€4.00*
Contents: 1 pcs
€4.00*
Contents: 1 pcs
€5.00*
Contents: 1 pcs
€5.50*
Contents: 1 pcs
€5.90*
Contents: 1 pcs
€7.00*
Contents: 1 pcs
€7.50*
Contents: 1 pcs
€7.50*
Contents: 1 pcs
€7.50*
Contents: 1 pcs
€8.50*
Contents: 1 pcs
€8.50*
Contents: 1 pcs
€8.50*
Contents: 1 pcs
€9.50*
Contents: 1 pcs
€12.90*
Contents: 1 pcs
€16.90*
Contents: 1 pcs
13 August 2025 12:23
Die Qualität und das Preis-Leistungsverhältnis waren sehr
Die Qualität und das Preis-Leistungsverhältnis waren sehr gut.
14 June 2022 11:30
Hat bestens zum Ausreiben des Kolbenbolzenlagers an
Hat bestens zum Ausreiben des Kolbenbolzenlagers an meinem Motorrad funktioniert.
22 February 2021 00:00
Werkzeug hat gute Qualität und macht was es soll.
Funktioniert tadellos.
27 January 2021 00:00
Reibahle 16H7
Flotte Lieferung, alles gut.
3 April 2020 00:00
tres bon produit
me convient
14 December 2019 00:00
Super
Artikel in einwandfreien Zustand, rasche Lieferung, gerne wieder
9 June 2018 00:00
es ist gut
gut
24 March 2018 00:00
Wie immer sehrgut
Schnelle Lieferung und sehrgute Ware. Habe alle Reibahlen bei paulimot gekauft, bin sehr zufrieden.
25 October 2013 00:00
Molto buono
30 December 2012 00:00
Preis Leistung passt