HSS-Hand reamer 19 mm fit H7
€13.90*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
Less than 10 pieces available (online and in specialist shops)
Intended use
A reamer is used for the finishing of bores. The bores, which should usually be drilled 0.1 to 0.2 mm below the nominal size, can be reamed to the final size using a reamer. In the vast majority of cases, reamers are used to ream bores for dowel pins. Machining the bore in this way ensures a high degree of dimensional and geometric accuracy, as well as a high surface finish on the finished reamed bore.
Technical data
| Cutting length [mm]: | approx. 93 |
|---|---|
| Execution: | right-hand cutting |
| Tolerance class: | H7 |
| Total length [mm]: | 189 |
| Ø reamers [mm]: | 19 |
| Material: | HSS |
Tolerance class H7
Made from HSS steel
Right-hand cutting
Cylindrical shank with square section
Description of the
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
Scope of delivery
- 1 x hand reamer, Ø 19 mm
More about the brand and products from
