HSS hand reamer 20 mm fit H7
€16.90*
% €22.50* (24.89% saved)Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
A reamer is used for the finishing of bores. Bores, which should usually be drilled 0.1 to 0.2 mm below nominal size, can be reamed to the final dimension using a reamer. In the vast majority of cases, reamers are used to ream bores for dowel pins. Machining the bore ensures high dimensional and geometric accuracy, as well as a high surface finish on the finished reamed bore.
Technical data
| Cutting length [mm]: | approx. 99 |
|---|---|
| Execution: | right-hand cutting |
| Tolerance class: | H7 |
| Total length [mm]: | 200 |
| Ø reamers [mm]: | 20 |
| Material: | HSS |
Tolerance class H7
Made from HSS steel
Right-hand cutting
Cylindrical shank with square section
Description of the
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
Scope of delivery
- 1 x hand reamer, Ø 20 mm
More about the brand and products from
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
Cylindrical shank with square, right-hand cutting
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
€16.90*
Contents: 1 pcs
€3.00*
Contents: 1 pcs
€3.00*
Contents: 1 pcs
€3.00*
Contents: 1 pcs
€3.50*
Contents: 1 pcs
€4.00*
Contents: 1 pcs
€4.00*
Contents: 1 pcs
€5.00*
Contents: 1 pcs
€5.50*
Contents: 1 pcs
€5.90*
Contents: 1 pcs
€7.00*
Contents: 1 pcs
€7.50*
Contents: 1 pcs
€7.50*
Contents: 1 pcs
€7.50*
Contents: 1 pcs
€8.50*
Contents: 1 pcs
€8.50*
Contents: 1 pcs
€8.50*
Contents: 1 pcs
€8.90*
Contents: 1 pcs
€9.50*
Contents: 1 pcs
€12.90*
Contents: 1 pcs
25 September 2021 00:00
Entspricht komplett meinen Erwartungen
Gut Verarbeitet
24 October 2020 00:00
Genauigkeit
Ich bin mit dieser Reibahle sehr zufrieden , sie entspricht genau meinen Vorstellungen
22 October 2020 00:00
Alles io
Top Qualität
29 May 2018 00:00
Tadellos!
Die Reibahle hat die ihr zugedachten Arbeiten - mehrere Rotgussbüchsen in Lager zu verwandeln - ohne Grund zu Beschwerden erledigt. Die entstandenen Passungen sind sehr genau, die erzielten Oberflächen völlig glatt!
27 May 2018 00:00
Enttäuschend. Nicht scharf genug
Ich habe nach Reklamation der ersten Lieferung eine neue Reibahle bekommen. Beide Reibahlen waren leider nicht scharf genug. Eine 20mm Messinghülse mit ca. 17mm Länge hat mich ca. 1,5h Arbeitszeit gekostet. Mit einer besseren Reibahle wäre das eine Sache von Minuten gewesen. Sehr enttäuschend.
26 January 2018 00:00
Sehr gut
Rasche Lieferung, unkomplizierte Bestellung und guter Internetauftritt
30 December 2017 00:00
Gute Ware
4 June 2016 00:00
Sehr gutes Preis Leistungsverhältnis
Schnelle Lieferung. Gerne wieder einmal.
31 January 2015 00:00
sehr gut
Schnelle Lieferung, habe sie noch nicht eingesetzt.
30 November 2013 00:00
sehr gut