HSS hand reamer 3 mm fit H7
Intended use
A reamer is used for the fine machining of bores. The holes, which should usually be drilled 0.1 to 0.2 mm below the nominal dimension, can be reamed to the final dimension using a reamer. In the vast majority of cases, reamers are used to ream holes for dowel pins. By machining the bore, a high degree of shape and dimensional accuracy as well as a high surface quality of the finished reamed bore are achieved.
Technical data
| Cutting length [mm]: | approx. 17 |
|---|---|
| Cutting length [mm]: | approx. 17 |
| Execution: | right-hand cutting |
| Tolerance class: | H7 |
| Total length [mm]: | 62 |
| Total length [mm]: | 62 |
| Ø reamer [mm]: | 3 |
| Ø reamers [mm]: | 3 |
| Material: | HSS |
Tolerance class H7
Made from HSS steel
Right-hand cutting
Cylindrical shank with square edge
Description of the
Cylindrical shank with square, right-hand cutting
Scope of delivery
- 1 x hand reamer Ø 3 mm
More about the brand and products from
