HSS hand reamer 4.5 mm fit H7
€4.00*
% €5.50* (27.27% saved)Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
A reamer is used for the finishing of bores. Bores, which should usually be drilled 0.1 to 0.2 mm below nominal size, can be reamed to the final dimension using a reamer. In the vast majority of cases, reamers are used to ream bores for dowel pins. Machining the bore ensures high dimensional and geometric accuracy, as well as a high surface finish on the finished reamed bore.
Technical data
| Cutting length [mm]: | approx. 21 |
|---|---|
| Execution: | right-hand cutting |
| Tolerance class: | H7 |
| Total length [mm]: | 80 |
| Ø reamers [mm]: | 4,5 |
| Material: | HSS |
Tolerance class H7
Made from HSS steel
Right-hand cutting
Cylindrical shank with square section
Description of the
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
Scope of delivery
- 1 x hand reamer, Ø 4.5 mm
More about the brand and products from
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
Cylindrical shank with square, right-hand cutting
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
€4.00*
Contents: 1 pcs
€3.00*
Contents: 1 pcs
€3.00*
Contents: 1 pcs
€3.00*
Contents: 1 pcs
€3.50*
Contents: 1 pcs
€4.00*
Contents: 1 pcs
€5.00*
Contents: 1 pcs
€5.00*
Contents: 1 pcs
28 July 2023 06:59
bin sehr zufrieden, alles in bester Ordnung!
bin sehr zufrieden, alles in bester Ordnung!
16 February 2023 17:08
Gutes Werkzeug schnelle Lieferung,was will man mehr.
Gutes Werkzeug schnelle Lieferung,was will man mehr.
8 February 2023 09:02
Preis -Leistungsverhältnis ist oK,Qualität ist gut
Preis -Leistungsverhältnis ist oK,Qualität ist gut
25 December 2017 00:00
gutes Produkt
Funktioniert einwandfrei, Preis-Leistung sehr gut - was will man mehr!
6 May 2016 00:00
schnelle Lieferung und gute Qualität!
schnelle Lieferung und gute Qualität!
15 June 2015 00:00
gut
7 November 2013 00:00
gut
25 June 2013 00:00
alles in ordnung.