HSS hand reamer 8 mm fit H7
€7.50*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
A reamer is used for the fine machining of bores. The bores, which should usually be drilled 0.1 to 0.2 mm below the nominal dimension, can be reamed to the final dimension using a reamer. In the vast majority of cases, reamers are used to ream holes for dowel pins. By machining the bore, a high degree of shape and dimensional accuracy as well as a high surface quality of the finished reamed bore are achieved.
Technical data
| Cutting length [mm]: | approx. 57 |
|---|---|
| Execution: | right-hand cutting |
| Tolerance class: | H7 |
| Total length [mm]: | 115 |
| Ø reamers [mm]: | 8 |
| Material: | HSS |
Tolerance class H7
Made of HSS steel
Right-hand cutting
Cylindrical shank with square
Description of the
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
Scope of delivery
- 1 x hand reamer Ø 8 mm
More about the brand and products from
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
Cylindrical shank with square, right-hand cutting
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
€7.50*
Content: 1 pcs
€3.50*
Content: 1 pcs
€3.50*
Content: 1 pcs
€3.50*
Content: 1 pcs
€4.50*
Content: 1 pcs
€4.50*
Content: 1 pcs
€5.50*
Content: 1 pcs
€6.50*
Content: 1 pcs
€6.50*
Content: 1 pcs
€6.50*
Content: 1 pcs
€7.00*
Content: 1 pcs
€9.50*
Content: 1 pcs
€10.00*
Content: 1 pcs
€10.00*
Content: 1 pcs
€10.00*
Content: 1 pcs
€11.00*
Content: 1 pcs
€11.00*
Content: 1 pcs
€11.50*
Content: 1 pcs
€12.50*
Content: 1 pcs
€13.00*
Content: 1 pcs
€17.00*
Content: 1 pcs
€19.00*
Content: 1 pcs
€22.50*
Content: 1 pcs
21 March 2023 23:37
Gute Qualität, beste Arbeitsergebnisse, Preis einwandfrei
Gute Qualität, beste Arbeitsergebnisse, Preis einwandfrei
6 March 2023 06:22
alles prima
alles prima
6 February 2023 17:45
Gewohnte Paulimot Qualität und fix geliefert. Spitze
Gewohnte Paulimot Qualität und fix geliefert. Spitze
12 November 2022 06:55
Die Qualität der Reibahle ist gut, das
Die Qualität der Reibahle ist gut, das Preis-Leistungs Verhältnis, die Abwicklung des Kaufes und Die Lieferdauer sehr zufriedenstellend.
25 July 2022 13:39
Wie immer Top
Wie immer Top
6 July 2022 09:19
Einwandfrei
Einwandfrei
6 April 2021 00:00
Einwandfrei
funktioniert tadellos
31 March 2021 00:00
Qualitätswerkzeug
Sehr gutes Werkzeug und sehr schnelle Lieferung
23 March 2021 00:00
Werkzeug
das Werkzeug hat mich überzeugt ist für Profis
1 March 2021 00:00
Eine gute Handreibahle
die sich auch auf der Drehmaschine mit geringen Drehzahlen einsetzen lässt. 7,8mm bohren, ölen, reiben und schon ist eine passgenaue Bohrung mit 1a-Oberfläche entstanden. Empfehlenswert.